안녕하세요
미치기 일보직전인놈입니다
다름이 아니라
문서에 서술되어있는데로 여러방법을 해보았으나 실패하여
쪽팔림을 무릅쓰고 전 내용을 다올립니다
뭐가 잘못됬는지 모르겠습니다
문제는 하나의 아이디에 두개의 도메인을 셋팅하는 겁니다
nslookup 으로 www.aaa.co.kr 하면 100.100.100.1 하고 찾아집니다
              www.bbb.co.kr 해도 역시 100.100.100.1 하고 찾아집니다
 httpd -S 하면
[root@www conf]# httpd -S
VirtualHost configuration:
100.100.100.1:80      is a NameVirtualHost
                       default server www.aaa.co.kr (/etc/httpd/conf/httpd.conf:346)
                       port 80 namevhost www.aaa.co.kr (/etc/httpd/conf/httpd.conf:346)
                       port 80 namevhost www.bbb.com (/etc/httpd/conf/httpd.conf:354)
하고 출력됩니다
그런데 아파치 데몬을 올릴때
 [root@www init.d]# ./httpd start
Starting httpd: [  OK  ]
[root@www init.d]# ./httpd stop
Shutting down http: [FAILED]
하고 나옵니다
ok 는 떨어지는데 웹서버가 올라가지 않은상태죠
그리고 stop 하면 위와같이 failed 가 떨어집니다
무슨 설정이 잘못된거죠
제발 부탁입니다
조언 부탁합니다
 ##
## httpd.conf -- Apache HTTP server configuration file
##
 # This is the main server configuration file. See URL
http://www.apache.org/ # for instructions.
 # Do NOT simply read the instructions in here without understanding
# what they do, if you are unsure consult the online docs. You have
been
# warned. 
 # Originally by Rob McCool
 # ServerType is either inetd, or standalone.
 ServerType standalone
 # If you are running from inetd, go to "ServerAdmin".
 # Port: The port the standalone listens to. For ports < 1023, you will
# need httpd to be run as root initially.
 Port 80
 # HostnameLookups: Log the names of clients or just their IP numbers
#   e.g.   www.apache.org (on) or 204.62.129.132 (off)
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on.
 HostnameLookups off
 # If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
 # User/Group: The name (or #number) of the user/group to run httpd as.
#  On SCO (ODT 3) use User nouser and Group nogroup
#  On HPUX you may not be able to use shared memory as nobody, and the
#  suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group nobody on these systems!
 User nobody
Group nobody
 # ServerAdmin: Your address, where problems with the server should be
# e-mailed.
 ServerAdmin webmaster at aaa.co.kr  # ServerRoot: The directory the server's config, error, and log files
# are kept in.
# NOTE!  If you intend to place this on a NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation,
# you will save yourself a lot of trouble.
 ServerRoot "/etc/httpd"
 # BindAddress: You can support virtual hosts with this option. This
option
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the VirtualHost directive.
 #BindAddress *
 # ErrorLog: The location of the error log file. If this does not start
# with /, ServerRoot is prepended to it.
 ErrorLog logs/error_log
 # LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
 LogLevel warn
 # Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `httpd -l' for the list of
already
# built-in (statically linked and thus always available) modules in
your httpd
# binary.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
#
# Documentation for modules is in "/home/httpd/manual/mod" in HTML
format.
 #LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module         modules/mod_env.so
LoadModule config_log_module  modules/mod_log_config.so
LoadModule agent_log_module   modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module  modules/mod_mime_magic.so
LoadModule mime_module        modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule status_module      modules/mod_status.so
#LoadModule info_module        modules/mod_info.so
#LoadModule includes_module    modules/mod_include.so
LoadModule autoindex_module   modules/mod_autoindex.so
LoadModule dir_module         modules/mod_dir.so
LoadModule cgi_module         modules/mod_cgi.so
LoadModule asis_module        modules/mod_asis.so
LoadModule imap_module        modules/mod_imap.so
LoadModule action_module      modules/mod_actions.so
#LoadModule speling_module     modules/mod_speling.so
LoadModule userdir_module     modules/mod_userdir.so
LoadModule alias_module       modules/mod_alias.so
LoadModule rewrite_module     modules/mod_rewrite.so
LoadModule access_module      modules/mod_access.so
LoadModule auth_module        modules/mod_auth.so
LoadModule anon_auth_module   modules/mod_auth_anon.so
#LoadModule dbm_auth_module    modules/mod_auth_dbm.so
LoadModule db_auth_module     modules/mod_auth_db.so
LoadModule digest_module      modules/mod_digest.so
#LoadModule proxy_module       modules/libproxy.so
#LoadModule cern_meta_module   modules/mod_cern_meta.so
LoadModule expires_module     modules/mod_expires.so
LoadModule headers_module     modules/mod_headers.so
LoadModule usertrack_module   modules/mod_usertrack.so
#LoadModule example_module     modules/mod_example.so
#LoadModule unique_id_module   modules/mod_unique_id.so
LoadModule setenvif_module    modules/mod_setenvif.so
LoadModule bandwidth_module   modules/mod_bandwidth.so
 # Extra Modules
#LoadModule php_module         modules/mod_php.so
LoadModule php3_module        modules/libphp3.so
#LoadModule perl_module        modules/libperl.so
 #  Reconstruction of the complete module list from all available
modules
#  (static and shared ones) to achieve correct module execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
#AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
#AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
AddModule mod_bandwidth.c
 # Extra Modules
#AddModule mod_php.c
AddModule mod_php3.c
#AddModule mod_perl.c
  # The following directives define some format nicknames for use with
# a CustomLog directive (see below).
 LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}
i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
 # The location of the access logfile (Common Logfile Format).
# If this does not start with /, ServerRoot is prepended to it.
 CustomLog logs/access_log common
 # If you would like to have an agent and referer logfile uncomment the
# following directives.
 #CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
 # If you prefer a single logfile with access, agent and referer
information
# (Combined Logfile Format) you can use the following directive.
 #CustomLog logs/access_log combined
 # PidFile: The file the server should log its pid to
PidFile /var/run/httpd.pid
 # ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this.  But if yours does (you'll know
because
# this file is created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile /var/run/httpd.scoreboard
 # The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left
at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A
LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
#LockFile /var/lock/httpd.lock
 # ServerName allows you to set a host name which is sent back to
clients for
# your server if it's different than the one the program would get
(i.e. use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
 ServerName www.aaa.co.kr DocumentRoot "/home/httpd/htdocs/"
 # UseCanonicalName: (new for 1.3)  With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a url that refers
back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGIs.
UseCanonicalName on
 # CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with
each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
 #CacheNegotiatedDocs
 # Timeout: The number of seconds before receives and sends time out
 Timeout 300
 # KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
 KeepAlive On
 # MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We reccomend you leave this number high, for maximum performance.
 MaxKeepAliveRequests 100
 # KeepAliveTimeout: Number of seconds to wait for the next request
 KeepAliveTimeout 15
 # Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
 # It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  These values are probably OK for most sites ---
 MinSpareServers 8
MaxSpareServers 20
 # Number of servers to start --- should be a reasonable ballpark
figure.
 StartServers 10
 # Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# Unix with it as it spirals down...
 MaxClients 150
 # MaxRequestsPerChild: the number of requests each child process is
#  allowed to process before the child dies.
#  The child will exit so as to avoid problems after prolonged use when
#  Apache (and maybe the libraries it uses) leak.  On most systems,
this
#  isn't really needed, but a few (such as Solaris) do have notable
leaks
#  in the libraries.
 MaxRequestsPerChild 100
 # Proxy Server directives. Uncomment the following line to
# enable the proxy server:
 #ProxyRequests On
 # To enable the cache as well, edit and uncomment the following lines:
 #CacheRoot /var/cache/httpd
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
 # Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the VirtualHost command
 #Listen 3000
#Listen 12.34.56.78:80
 # VirtualHost: Allows the daemon to respond to requests for more than
one
# server address, if your server machine is configured to accept IP
packets
# for multiple addresses. This can be accomplished with the ifconfig
# alias flag, or through kernel patches like VIF.
 # Any httpd.conf or srm.conf directive may go into a VirtualHost
command.
# See also the BindAddress entry.
 
#<VirtualHost host.some_domain.com>
#ServerAdmin webmaster at host.some_domain.com #DocumentRoot /www/docs/host.some_domain.com
#ServerName host.some_domain.com
#ErrorLog logs/host.some_domain.com-error_log
#TransferLog logs/host.some_domain.com-access_log
#</VirtualHost>
 NameVirtualHost 100.100.100.1
 <VirtualHost 100.100.100.1>
ServerName www.aaa.co.kr ServerAdmin webmaster at aaa.co.kr DocumentRoot "/home/http/htdocs/"
ErrorLog logs/www.aaa.co.kr-error_log
TransferLog logs/www.aaa.co.kr-access_log
</VirtualHost>
 <VirtualHost 100.100.100.1>
ServerName www.bbb.com ServerAdmin webmaster at bbb.com DocumentRoot "/home/bbb/public_html/"
ErrorLog logs/www.bbb.com-error_log
TransferLog logs/www.bbb.com-access_log
</VirtualHost>