Directory  Options 에 ExecCGI 를 추가하시면 됩니다.
그리고, 아파치 재구동하시면 됩니다.
 예를 들어 아래처럼..
 <Directory />
    Options FollowSymLinks ExecCGI<-- 추가부분
    AllowOverride None
</Directory>
   <Directory "/home/httpd/html">
 Options Indexes Includes FollowSymLinks ExecCGI <--- 추가부분
 AllowOverride None
 Order allow,deny
 Allow from all
 </Directory>
 그럼, 수고하세요
 : cgi 가 안됩니다.
: perl로 짠 cgi의 실행이 되지 않습니다.
: 실행시키면 Internal Server Error 에러가 나옵니다.
: 와우리눅스 6.2 를 설치했고 아파치의 httpd.conf 는 아래와 같습니다.
: 꼭 답변 부탁드립니다.
: 가능하시면 메일로 알려 주세요....
: kyunghs at popsmail.com :
: ##
: ## httpd.conf -- Apache HTTP server configuration file
: ##
:
: #
: # Based upon the NCSA server configuration files originally by Rob McCool.
: #
: # This is the main Apache server configuration file.  It contains the
: # configuration directives that give the server its instructions.
: # See <URL:http://www.apache.org/docs/> for detailed information about
: # the directives.
: #
: # Do NOT simply read the instructions in here without understanding
: # what they do.  They're here only as hints or reminders.  If you are unsure
: # consult the online docs. You have been warned. 
: #
: # After this file is processed, the server will look for and process
: # /usr/conf/srm.conf and then /usr/conf/access.conf
: # unless you have overridden these with ResourceConfig and/or
: # AccessConfig directives here.
: #
: # The configuration directives are grouped into three basic sections:
: #  1. Directives that control the operation of the Apache server process as a
: #     whole (the 'global environment').
: #  2. Directives that define the parameters of the 'main' or 'default' server,
: #     which responds to requests that aren't handled by a virtual host.
: #     These directives also provide default values for the settings
: #     of all virtual hosts.
: #  3. Settings for virtual hosts, which allow Web requests to be sent to
: #     different IP addresses or hostnames and have them handled by the
: #     same Apache server process.
: #
: # Configuration and logfile names: If the filenames you specify for many
: # of the server's control files begin with "/" (or "drive:/" for Win32), the
: # server will use that explicit path.  If the filenames do *not* begin
: # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
: # with ServerRoot set to "/usr/local/apache" will be interpreted by the
: # server as "/usr/local/apache/logs/foo.log".
: #
:
: ### Section 1: Global Environment
: #
: # The directives in this section affect the overall operation of Apache,
: # such as the number of concurrent requests it can handle or where it
: # can find its configuration files.
: #
:
: #
: # ServerType is either inetd, or standalone.  Inetd mode is only supported on
: # Unix platforms.
: #
: ServerType standalone
:
: #
: # ServerRoot: The top of the directory tree under which the server's
: # configuration, error, and log files are kept.
: #
: # NOTE!  If you intend to place this on an NFS (or otherwise network)
: # mounted filesystem then please read the LockFile documentation
: # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
: # you will save yourself a lot of trouble.
: #
: # Do NOT add a slash at the end of the directory path.
: #
: ServerRoot "/etc/httpd"
:
: #
: # The LockFile directive sets the path to the lockfile used when Apache
: # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
: # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
: # its default value. The main reason for changing it is if the logs
: # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
: # DISK. The PID of the main server process is automatically appended to
: # the filename.
: #
: LockFile /var/lock/httpd.lock
:
: #
: # PidFile: The file in which the server should record its process
: # identification number when it starts.
: #
: PidFile /var/run/httpd.pid
:
: #
: # ScoreBoardFile: File used to store internal server process information.
: # Not all architectures require this.  But if yours does (you'll know because
: # this file will be  created when you run Apache) then you *must* ensure that
: # no two invocations of Apache share the same scoreboard file.
: #
: ScoreBoardFile /var/run/httpd.scoreboard
:
: #
: # In the standard configuration, the server will process this file,
: # srm.conf, and access.conf in that order.  The latter two files are
: # now distributed empty, as it is recommended that all directives
: # be kept in a single file for simplicity.  The commented-out values
: # below are the built-in defaults.  You can have the server ignore
: # these files altogether by using "/dev/null" (for Unix) or
: # "nul" (for Win32) for the arguments to the directives.
: #
: #ResourceConfig conf/srm.conf
: #AccessConfig conf/access.conf
:
: #
: # Timeout: The number of seconds before receives and sends time out.
: #
: Timeout 300
:
: #
: # KeepAlive: Whether or not to allow persistent connections (more than
: # one request per connection). Set to "Off" to deactivate.
: #
: KeepAlive On
:
: #
: # MaxKeepAliveRequests: The maximum number of requests to allow
: # during a persistent connection. Set to 0 to allow an unlimited amount.
: # We recommend you leave this number high, for maximum performance.
: #
: MaxKeepAliveRequests 100
:
: #
: # KeepAliveTimeout: Number of seconds to wait for the next request from the
: # same client on the same connection.
: #
: KeepAliveTimeout 15
:
: #
: # Server-pool size regulation.  Rather than making you guess how many
: # server processes you need, Apache dynamically adapts to the load it
: # sees --- that is, it tries to maintain enough server processes to
: # handle the current load, plus a few spare servers to handle transient
: # load spikes (e.g., multiple simultaneous requests from a single
: # Netscape browser).
: #
: # It does this by periodically checking how many servers are waiting
: # for a request.  If there are fewer than MinSpareServers, it creates
: # a new spare.  If there are more than MaxSpareServers, some of the
: # spares die off.  The default values are probably OK for most sites.
: #
: MinSpareServers 5
: MaxSpareServers 20
:
: #
: # Number of servers to start initially --- should be a reasonable ballpark
: # figure.
: #
: StartServers 8
:
: #
: # Limit on total number of servers running, i.e., limit on the number
: # of clients who can simultaneously connect --- if this limit is ever
: # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
: # It is intended mainly as a brake to keep a runaway server from taking
: # the system with it as it spirals down...
: #
: MaxClients 150
:
: #
: # MaxRequestsPerChild: the number of requests each child process is
: # allowed to process before the child dies.  The child will exit so
: # as to avoid problems after prolonged use when Apache (and maybe the
: # libraries it uses) leak memory or other resources.  On most systems, this
: # isn't really needed, but a few (such as Solaris) do have notable leaks
: # in the libraries. For these platforms, set to something like 10000
: # or so; a setting of 0 means unlimited.
: #
: # NOTE: This value does not include keepalive requests after the initial
: #       request per connection. For example, if a child process handles
: #       an initial request and 10 subsequent "keptalive" requests, it
: #       would only count as 1 request towards this limit.
: #
: MaxRequestsPerChild 100
:
: #
: # Listen: Allows you to bind Apache to specific IP addresses and/or
: # ports, in addition to the default. See also the <VirtualHost>
: # directive.
: #
: #Listen 3000
: #Listen 12.34.56.78:80
:
: #
: # BindAddress: You can support virtual hosts with this option. This directive
: # is used to tell the server which IP address to listen to. It can either
: # contain "*", an IP address, or a fully qualified Internet domain name.
: # See also the <VirtualHost> and Listen directives.
: #
: #BindAddress *
:
: #
: # Dynamic Shared Object (DSO) Support
: #
: # To be able to use the functionality of a module which was built as a DSO you
: # have to place corresponding `LoadModule' lines at this location so the
: # directives contained in it are actually available _before_ they are used.
: # Please read the file README.DSO in the Apache 1.3 distribution for more
: # details about the DSO mechanism and run `httpd -l' for the list of already
: # built-in (statically linked and thus always available) modules in your httpd
: # binary.
: #
: # Note: The order is which modules are loaded is important.  Don't change
: # the order below without expert advice.
: #
: # Example:
: # LoadModule foo_module modules/mod_foo.so
: #LoadModule mmap_static_module modules/mod_mmap_static.so
: LoadModule vhost_alias_module modules/mod_vhost_alias.so
: LoadModule env_module         modules/mod_env.so
: LoadModule config_log_module  modules/mod_log_config.so
: LoadModule agent_log_module   modules/mod_log_agent.so
: LoadModule referer_log_module modules/mod_log_referer.so
: #LoadModule mime_magic_module  modules/mod_mime_magic.so
: LoadModule mime_module        modules/mod_mime.so
: LoadModule negotiation_module modules/mod_negotiation.so
: LoadModule status_module      modules/mod_status.so
: LoadModule info_module        modules/mod_info.so
: LoadModule includes_module    modules/mod_include.so
: LoadModule autoindex_module   modules/mod_autoindex.so
: LoadModule dir_module         modules/mod_dir.so
: LoadModule cgi_module         modules/mod_cgi.so
: LoadModule asis_module        modules/mod_asis.so
: LoadModule imap_module        modules/mod_imap.so
: LoadModule action_module      modules/mod_actions.so
: #LoadModule speling_module     modules/mod_speling.so
: LoadModule userdir_module     modules/mod_userdir.so
: LoadModule alias_module       modules/mod_alias.so
: LoadModule rewrite_module     modules/mod_rewrite.so
: LoadModule access_module      modules/mod_access.so
: LoadModule auth_module        modules/mod_auth.so
: LoadModule anon_auth_module   modules/mod_auth_anon.so
: LoadModule db_auth_module     modules/mod_auth_db.so
: LoadModule digest_module      modules/mod_digest.so
: LoadModule proxy_module       modules/libproxy.so
: #LoadModule cern_meta_module   modules/mod_cern_meta.so
: LoadModule expires_module     modules/mod_expires.so
: LoadModule headers_module     modules/mod_headers.so
: LoadModule usertrack_module   modules/mod_usertrack.so
: #LoadModule example_module     modules/mod_example.so
: #LoadModule unique_id_module   modules/mod_unique_id.so
: LoadModule setenvif_module    modules/mod_setenvif.so
: #LoadModule bandwidth_module   modules/mod_bandwidth.so
: #LoadModule put_module		modules/mod_put.so
:
: # Extra Modules
: LoadModule perl_module        modules/libperl.so
: #LoadModule php_module         modules/mod_php.so
: LoadModule php3_module        modules/libphp3.so
:
: #  Reconstruction of the complete module list from all available modules
: #  (static and shared ones) to achieve correct module execution order.
: #  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
: ClearModuleList
: #AddModule mod_mmap_static.c
: AddModule mod_vhost_alias.c
: AddModule mod_env.c
: AddModule mod_log_config.c
: AddModule mod_log_agent.c
: AddModule mod_log_referer.c
: #AddModule mod_mime_magic.c
: AddModule mod_mime.c
: AddModule mod_negotiation.c
: AddModule mod_status.c
: AddModule mod_info.c
: AddModule mod_include.c
: AddModule mod_autoindex.c
: AddModule mod_dir.c
: AddModule mod_cgi.c
: AddModule mod_asis.c
: AddModule mod_imap.c
: AddModule mod_actions.c
: #AddModule mod_speling.c
: AddModule mod_userdir.c
: AddModule mod_alias.c
: AddModule mod_rewrite.c
: AddModule mod_access.c
: AddModule mod_auth.c
: AddModule mod_auth_anon.c
: AddModule mod_auth_db.c
: AddModule mod_digest.c
: AddModule mod_proxy.c
: #AddModule mod_cern_meta.c
: AddModule mod_expires.c
: AddModule mod_headers.c
: AddModule mod_usertrack.c
: #AddModule mod_example.c
: #AddModule mod_unique_id.c
: AddModule mod_so.c
: AddModule mod_setenvif.c
: #AddModule mod_bandwidth.c
: #AddModule mod_put.c
:
: # Extra Modules
: AddModule mod_perl.c
: #AddModule mod_php.c
: AddModule mod_php3.c
:
: #
: # ExtendedStatus: controls whether Apache will generate "full" status
: # information (ExtendedStatus On) or just basic information (ExtendedStatus
: # Off) when the "server-status" handler is called. The default is Off.
: #
: #ExtendedStatus On
:
: ### Section 2: 'Main' server configuration
: #
: # The directives in this section set up the values used by the 'main'
: # server, which responds to any requests that aren't handled by a
: # <VirtualHost> definition.  These values also provide defaults for
: # any <VirtualHost> containers you may define later in the file.
: #
: # All of these directives may appear inside <VirtualHost> containers,
: # in which case these default settings will be overridden for the
: # virtual host being defined.
: #
:
: #
: # If your ServerType directive (set earlier in the 'Global Environment'
: # section) is set to "inetd", the next few directives don't have any
: # effect since their settings are defined by the inetd configuration.
: # Skip ahead to the ServerAdmin directive.
: #
:
: #
: # Port: The port to which the standalone server listens. For
: # ports < 1023, you will need httpd to be run as root initially.
: #
: Port 80
:
: #
: # If you wish httpd to run as a different user or group, you must run
: # httpd as root initially and it will switch. 
: #
: # User/Group: The name (or #number) of the user/group to run httpd as.
: #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
: #  . On HPUX you may not be able to use shared memory as nobody, and the
: #    suggested workaround is to create a user www and use that user.
: #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
: #  when the value of (unsigned)Group is above 60000;
: #  don't use Group nobody on these systems!
: #
: User nobody
: Group nobody
:
: #
: # ServerAdmin: Your address, where problems with the server should be
: # e-mailed.  This address appears on some server-generated pages, such
: # as error documents.
: #
: ServerAdmin root@localhost :
: #
: # ServerName: allows you to set a host name which is sent back to clients for
: # your server if it's different than the one the program would get (i.e., use
: # "www" instead of the host's real name).
: #
: # Note: You cannot just invent host names and hope they work. The name you
: # define here must be a valid DNS name for your host. If you don't understand
: # this, ask your network administrator.
: # If your host doesn't have a registered DNS name, enter its IP address here.
: # You will have to access it by its address (e.g., http://123.45.67.89/) : # anyway, and this will make redirections w
: ork in a sensible way. #
: ServerName xxx.xxx.xxx.xxx
: #
: # DocumentRoot: The directory out of which you will serve your
: # documents. By default, all requests are taken from this directory, but
: # symbolic links and aliases may be used to point to other locations.
: #
: DocumentRoot "/home/httpd/html"
:
: #
: # Each directory to which Apache has access, can be configured with respect
: # to which services and features are allowed and/or disabled in that
: # directory (and its subdirectories).
: #
: # First, we configure the "default" to be a very restrictive set of
: # permissions. 
: #
: <Directory />
:     Options FollowSymLinks
:     AllowOverride None
: </Directory>
:
: #
: # Note that from this point forward you must specifically allow
: # particular features to be enabled - so if something's not working as
: # you might expect, make sure that you have specifically enabled it
: # below.
: #
:
: #
: # This should be changed to whatever you set DocumentRoot to.
: #
: <Directory "/home/httpd/html">
:
: #
: # This may also be "None", "All", or any combination of "Indexes",
: # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
: #
: # Note that "MultiViews" must be named *explicitly* --- "Options All"
: # doesn't give it to you.
: #
:     Options Indexes Includes FollowSymLinks
:
: #
: # This controls which options the .htaccess files in directories can
: # override. Can also be "All", or any combination of "Options", "FileInfo",
: # "AuthConfig", and "Limit"
: #
:     AllowOverride None
:
: #
: # Controls who can get stuff from this server.
: #
:     Order allow,deny
:     Allow from all
: # 학수의 변경 부분
:     Options ExecCGI
: </Directory>
:
: #
: # UserDir: The name of the directory which is appended onto a user's home
: # directory if a ~user request is received.
: #
: UserDir public_html
:
: #
: # Control access to UserDir directories.  The following is an example
: # for a site where these directories are restricted to read-only.
: #
: #<Directory /home/*/public_html>
: #    AllowOverride FileInfo AuthConfig Limit
: #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
: #    <Limit GET POST OPTIONS PROPFIND>
: #        Order allow,deny
: #        Allow from all
: #    </Limit>
: #    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
: #        Order deny,allow
: #        Deny from all
: #    </Limit>
: #</Directory>
:
: #
: # DirectoryIndex: Name of the file or files to use as a pre-written HTML
: # directory index.  Separate multiple entries with spaces.
: #
: DirectoryIndex index.html index.htm index.shtml index.cgi
:
: #
: # AccessFileName: The name of the file to look for in each directory
: # for access control information.
: #
: AccessFileName .htaccess
:
: #
: # The following lines prevent .htaccess files from being viewed by
: # Web clients.  Since .htaccess files often contain authorization
: # information, access is disallowed for security reasons.  Comment
: # these lines out if you want Web visitors to see the contents of
: # .htaccess files.  If you change the AccessFileName directive above,
: # be sure to make the corresponding changes here.
: #
: # Also, folks tend to use names such as .htpasswd for password
: # files, so this will protect those as well.
: #
: <Files ~ "^.ht">
:     Order allow,deny
:     Deny from all
: </Files>
:
: #
: # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
: # document that was negotiated on the basis of content. This asks proxy
: # servers not to cache the document. Uncommenting the following line disables
: # this behavior, and proxies will be allowed to cache the documents.
: #
: #CacheNegotiatedDocs
:
: #
: # UseCanonicalName: (new for 1.3)  With this setting turned on, whenever
: # Apache needs to construct a self-referencing URL (a URL that refers back
: # to the server the response is coming from) it will use ServerName and
: # Port to form a "canonical" name.  With this setting off, Apache will
: # use the hostname:port that the client supplied, when possible.  This
: # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
: #
: UseCanonicalName On
:
: #
: # TypesConfig describes where the mime.types file (or equivalent) is
: # to be found.
: #
: TypesConfig /etc/mime.types
:
: #
: # DefaultType is the default MIME type the server will use for a document
: # if it cannot otherwise determine one, such as from filename extensions.
: # If your server contains mostly text or HTML documents, "text/plain" is
: # a good value.  If most of your content is binary, such as applications
: # or images, you may want to use "application/octet-stream" instead to
: # keep browsers from trying to display binary files as though they are
: # text.
: #
: DefaultType text/plain
:
: #
: # The mod_mime_magic module allows the server to use various hints from the
: # contents of the file itself to determine its type.  The MIMEMagicFile
: # directive tells the module where the hint definitions are located.
: # mod_mime_magic is not part of the default server (you have to add
: # it yourself with a LoadModule [see the DSO paragraph in the 'Global
: # Environment' section], or recompile the server and include mod_mime_magic
: # as part of the configuration), so it's enclosed in an <IfModule> container.
: # This means that the MIMEMagicFile directive will only be processed if the
: # module is part of the server.
: #
: <IfModule mod_mime_magic.c>
:     MIMEMagicFile share/magic
: </IfModule>
:
: #
: # HostnameLookups: Log the names of clients or just their IP addresses
: # e.g., www.apache.org (on) or 204.62.129.132 (off).
: # The default is off because it'd be overall better for the net if people
: # had to knowingly turn this feature on, since enabling it means that
: # each client request will result in AT LEAST one lookup request to the
: # nameserver.
: #
: HostnameLookups Off
:
: #
: # ErrorLog: The location of the error log file.
: # If you do not specify an ErrorLog directive within a <VirtualHost>
: # container, error messages relating to that virtual host will be
: # logged here.  If you *do* define an error logfile for a <VirtualHost>
: # container, that host's errors will be logged there and not here.
: #
: ErrorLog /var/log/httpd/error_log
:
: #
: # LogLevel: Control the number of messages logged to the error_log.
: # Possible values include: debug, info, notice, warn, error, crit,
: # alert, emerg.
: #
: LogLevel warn
:
: #
: # The following directives define some format nicknames for use with
: # a CustomLog directive (see below).
: #
: LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
: LogFormat "%h %l %u %t "%r" %>s %b" common
: LogFormat "%{Referer}i -> %U" referer
: LogFormat "%{User-agent}i" agent
:
: #
: # The location and format of the access logfile (Common Logfile Format).
: # If you do not define any access logfiles within a <VirtualHost>
: # container, they will be logged here.  Contrariwise, if you *do*
: # define per-<VirtualHost> access logfiles, transactions will be
: # logged therein and *not* in this file.
: #
: CustomLog /var/log/httpd/access_log common
:
: #
: # If you would like to have agent and referer logfiles, uncomment the
: # following directives.
: #
: #CustomLog /var/log/httpd/referer_log referer
: #CustomLog /var/log/httpd/agent_log agent
:
: #
: # If you prefer a single logfile with access, agent, and referer information
: # (Combined Logfile Format) you can use the following directive.
: #
: #CustomLog /var/log/httpd/access_log combined
:
: #
: # Optionally add a line containing the server version and virtual host
: # name to server-generated pages (error documents, FTP directory listings,
: # mod_status and mod_info output etc., but not CGI generated documents).
: # Set to "EMail" to also include a mailto: link to the ServerAdmin.
: # Set to one of:  On | Off | EMail
: #
: ServerSignature On
:
: #
: # Aliases: Add here as many aliases as you need (with no limit). The format is
: # Alias fakename realname
: #
: # Note that if you include a trailing / on fakename then the server will
: # require it to be present in the URL.  So "/icons" isn't aliased in this
: # example, only "/icons/"..
: #
: Alias /icons/ "/home/httpd/icons/"
:
: <Directory "/home/httpd/icons">
:     Options Indexes MultiViews
:     AllowOverride None
:     Order allow,deny
:     Allow from all
: </Directory>
:
: #
: # ScriptAlias: This controls which directories contain server scripts.
: # ScriptAliases are essentially the same as Aliases, except that
: # documents in the realname directory are treated as applications and
: # run by the server when requested rather than as documents sent to the client.
: # The same rules about trailing "/" apply to ScriptAlias directives as to
: # Alias.
: #
: ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"
:
:
: #
: # "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased
: # CGI directory exists, if you have that configured.
: #
: <Directory "/home/httpd/cgi-bin">
:     # 학수가 수정한 부분 1줄
:     Options FollowSymLinks Includes ExecCGI
:     AllowOverride None
:     Options ExecCGI
:     Order allow,deny
:     Allow from all
: </Directory>
:
: #
: # Redirect allows you to tell clients about documents which used to exist in
: # your server's namespace, but do not anymore. This allows you to tell the
: # clients where to look for the relocated document.
: # Format: Redirect old-URI new-URL
: #
:
: #
: # Directives controlling the display of server-generated directory listings.
: #
:
: #
: # FancyIndexing: whether you want fancy directory indexing or standard
: #
: IndexOptions FancyIndexing
:
: #
: # AddIcon* directives tell the server which icon to show for different
: # files or filename extensions.  These are only displayed for
: # FancyIndexed directories.
: #
: AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
:
: AddIconByType (TXT,/icons/text.gif) text/*
: AddIconByType (IMG,/icons/image2.gif) image/*
: AddIconByType (SND,/icons/sound2.gif) audio/*
: AddIconByType (VID,/icons/movie.gif) video/*
:
: AddIcon /icons/binary.gif .bin .exe
: AddIcon /icons/binhex.gif .hqx
: AddIcon /icons/tar.gif .tar
: AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
: AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
: AddIcon /icons/a.gif .ps .ai .eps
: AddIcon /icons/layout.gif .html .shtml .htm .pdf
: AddIcon /icons/text.gif .txt
: AddIcon /icons/c.gif .c
: AddIcon /icons/p.gif .pl .py
: AddIcon /icons/f.gif .for
: AddIcon /icons/dvi.gif .dvi
: AddIcon /icons/uuencoded.gif .uu
: AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
: AddIcon /icons/tex.gif .tex
: AddIcon /icons/bomb.gif core
:
: AddIcon /icons/back.gif ..
: AddIcon /icons/hand.right.gif README
: AddIcon /icons/folder.gif ^^DIRECTORY^^
: AddIcon /icons/blank.gif ^^BLANKICON^^
:
: #
: # DefaultIcon: which icon to show for files which do not have an icon
: # explicitly set.
: #
: DefaultIcon /icons/unknown.gif
:
: #
: # AddDescription: allows you to place a short description after a file in
: # server-generated indexes.  These are only displayed for FancyIndexed
: # directories.
: # Format: AddDescription "description" filename
: #
: #AddDescription "GZIP compressed document" .gz
: #AddDescription "tar archive" .tar
: #AddDescription "GZIP compressed tar archive" .tgz
:
: #
: # ReadmeName: the name of the README file the server will look for by
: # default, and append to directory listings.
: #
: # HeaderName: the name of a file which should be prepended to
: # directory indexes.
: #
: # The server will first look for name.html and include it if found.
: # If name.html doesn't exist, the server will then look for name.txt
: # and include it as plaintext if found.
: #
: ReadmeName README
: HeaderName HEADER
:
: #
: # IndexIgnore: a set of filenames which directory indexing should ignore
: # and not include in the listing.  Shell-style wildcarding is permitted.
: #
: IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
:
: #
: # AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress
: # information on the fly. Note: Not all browsers support this.
: # Despite the name similarity, the following Add* directives have nothing
: # to do with the FancyIndexing customization directives above.
: #
: AddEncoding x-compress Z
: AddEncoding x-gzip gz tgz
:
: #
: # AddLanguage: allows you to specify the language of a document. You can
: # then use content negotiation to give a browser a file in a language
: # it can understand.  Note that the suffix does not have to be the same
: # as the language keyword --- those with documents in Polish (whose
: # net-standard language code is pl) may wish to use "AddLanguage pl .po"
: # to avoid the ambiguity with the common suffix for perl scripts.
: #
: AddLanguage en .en
: AddLanguage fr .fr
: AddLanguage de .de
: AddLanguage da .da
: AddLanguage el .el
: AddLanguage it .it
:
: #
: # LanguagePriority: allows you to give precedence to some languages
: # in case of a tie during content negotiation.
: # Just list the languages in decreasing order of preference.
: #
: LanguagePriority en fr de
:
: #
: # AddType: allows you to tweak mime.types without actually editing it, or to
: # make certain files to be certain types.
: #
: # For example, the PHP3 module (not part of the Apache distribution - see
: # http://www.php.net) will typically use:
: #
: <IfModule mod_php3.c>
:   AddType application/x-httpd-php3 .php3
:   AddType application/x-httpd-php3-source .phps
: </IfModule>
:
: # The following is for PHP/FI (PHP2):
: <IfModule mod_php.c>
:   AddType application/x-httpd-php .phtml
: </IfModule>
:
: AddType application/x-tar .tgz
: # 학수가 수정한 부분
:   AddType application/x-httpd-cgi .cgi
:   AddType application/x-httpd-cgi .pl
: #
: # AddHandler: allows you to map certain file extensions to "handlers",
: # actions unrelated to filetype. These can be either built into the server
: # or added with the Action command (see below)
: #
: # If you want to use server side includes, or CGI outside
: # ScriptAliased directories, uncomment the following lines.
: #
: # To use CGI scripts:
: #
: # 학수가 수정한 부분
: AddHandler cgi-script .cgi
:
: #
: # To use server-parsed HTML files
: #
: AddType text/html .shtml
: AddHandler server-parsed .shtml
:
: #
: # Uncomment the following line to enable Apache's send-asis HTTP file
: # feature
: #
: #AddHandler send-as-is asis
:
: #
: # If you wish to use server-parsed imagemap files, use
: #
: AddHandler imap-file map
:
: #
: # To enable type maps, you might want to use
: #
: #AddHandler type-map var
:
: #
: # Action: lets you define media types that will execute a script whenever
: # a matching file is called. This eliminates the need for repeated URL
: # pathnames for oft-used CGI file processors.
: # Format: Action media/type /cgi-script/location
: # Format: Action handler-name /cgi-script/location
: #
:
: #
: # MetaDir: specifies the name of the directory in which Apache can find
: # meta information files. These files contain additional HTTP headers
: # to include when sending the document
: #
: #MetaDir .web
:
: #
: # MetaSuffix: specifies the file name suffix for the file containing the
: # meta information.
: #
: #MetaSuffix .meta
:
: #
: # Customizable error response (Apache style)
: #  these come in three flavors
: #
: #    1) plain text
: #ErrorDocument 500 "The server made a boo boo.
: #  n.b.  the (") marks it as text, it does not get output
: #
: #    2) local redirects
: #ErrorDocument 404 /missing.html
: #  to redirect to local URL /missing.html
: #ErrorDocument 404 /cgi-bin/missing_handler.pl
: #  N.B.: You can redirect to a script or a document using server-side-includes.
: #
: #    3) external redirects
: #ErrorDocument 402 http://some.other_server.com/subscription_info.html : #  N.B.: Many of the environment variables a
: ssociated with the original #  request will *not* be available to such a script.
:
: #
: # The following directives modify normal HTTP response behavior.
: # The first directive disables keepalive for Netscape 2.x and browsers that
: # spoof it. There are known problems with these browser implementations.
: # The second directive is for Microsoft Internet Explorer 4.0b2
: # which has a broken HTTP/1.1 implementation and does not properly
: # support keepalive when it is used on 301 or 302 (redirect) responses.
: #
: BrowserMatch "Mozilla/2" nokeepalive
: BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
:
: #
: # The following directive disables HTTP/1.1 responses to browsers which
: # are in violation of the HTTP/1.0 spec by not being able to grok a
: # basic 1.1 response.
: #
: BrowserMatch "RealPlayer 4.0" force-response-1.0
: BrowserMatch "Java/1.0" force-response-1.0
: BrowserMatch "JDK/1.0" force-response-1.0
:
:
: # If the perl module is installed, this will be enabled.
: <IfModule mod_perl.c>
:   Alias /perl/ /home/httpd/perl/
:   <Location /perl>
:     SetHandler perl-script
:     PerlHandler Apache::Registry
:     Options +ExecCGI
:   </Location>
: </IfModule>
:
: #
: # Allow http put (such as Netscape Gold's publish feature)
: # Use htpasswd to generate /etc/httpd/conf/passwd.
: # You must unremark these two lines at the top of this file as well:
: #LoadModule put_module		modules/mod_put.so
: #AddModule mod_put.c
: #
: #Alias /upload /tmp
: #<Location /upload>
: #    EnablePut On
: #    AuthType Basic
: #    AuthName Temporary
: #    AuthUserFile /etc/httpd/conf/passwd
: #    EnableDelete Off
: #    umask 007
: #    <Limit PUT>
: #	require valid-user
: #    </Limit>
: #</Location>
:
: #
: # Allow server status reports, with the URL of http://servername/server-status
: # Change the ".your_domain.com" to match your domain to enable.
: #
: #<Location /server-status>
: #    SetHandler server-status
: #    Order deny,allow
: #    Deny from all
: #    Allow from .your_domain.com
: #</Location>
:
: #
: # Allow remote server configuration reports, with the URL of
: #  http://servername/server-info (requires that mod_info.c be loaded).
: # Change the ".your_domain.com" to match your domain to enable.
: #
: #<Location /server-info>
: #    SetHandler server-info
: #    Order deny,allow
: #    Deny from all
: #    Allow from .your_domain.com
: #</Location>
:
: # Allow access to local system documentation from localhost
: Alias /doc/ /usr/doc/
: <Location /doc>
:   order deny,allow
:   deny from all
:   allow from localhost
:   Options Indexes FollowSymLinks
: </Location>
:
: #
: # There have been reports of people trying to abuse an old bug from pre-1.1
: # days.  This bug involved a CGI script distributed as a part of Apache.
: # By uncommenting these lines you can redirect these attacks to a logging
: # script on phf.apache.org.  Or, you can record them yourself, using the script
: # support/phf_abuse_log.cgi.
: #
: #<Location /cgi-bin/phf*>
: #    Deny from all
: #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi : #</Location>
:
: #
: # Proxy Server directives. Uncomment the following lines to
: # enable the proxy server:
: #
: #<IfModule mod_proxy.c>
: #ProxyRequests On
: #
: #<Directory proxy:*>
: #    Order deny,allow
: #    Deny from all
: #    Allow from .your_domain.com
: #</Directory>
:
: #
: # Enable/disable the handling of HTTP/1.1 "Via:" headers.
: # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
: # Set to one of: Off | On | Full | Block
: #
: #ProxyVia On
:
: #
: # To enable the cache as well, edit and uncomment the following lines:
: # (no cacheing without CacheRoot)
: #
: #CacheRoot "/var/cache/httpd"
: #CacheSize 5
: #CacheGcInterval 4
: #CacheMaxExpire 24
: #CacheLastModifiedFactor 0.1
: #CacheDefaultExpire 1
: #NoCache a_domain.com another_domain.edu joes.garage_sale.com
:
: #</IfModule>
: # End of proxy directives.
:
: ### Section 3: Virtual Hosts
: #
: # VirtualHost: If you want to maintain multiple domains/hostnames on your
: # machine you can setup VirtualHost containers for them.
: # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
: # for further details before you try to setup virtual hosts.
: # You may use the command line option '-S' to verify your virtual host
: # configuration.
:
: #
: # If you want to use name-based virtual hosts you need to define at
: # least one IP address (and port number) for them.
: #
: #NameVirtualHost 12.34.56.78:80
: #NameVirtualHost 12.34.56.78
:
: #
: # VirtualHost example:
: # Almost any Apache directive may go into a VirtualHost container.
: #
: #<VirtualHost ip.address.of.host.some_domain.com>
: #    ServerAdmin webmaster at host.some_domain.com : #    DocumentRoot /www/docs/host.some_domain.com
: #    ServerName host.some_domain.com
: #    ErrorLog logs/host.some_domain.com-error_log
: #    CustomLog logs/host.some_domain.com-access_log common
: #</VirtualHost>
:
: #<VirtualHost _default_:*>
: #</VirtualHost>