안녕하세요..전문가 여러분...
이곳에서 도움을 항상 받고 있는 사람입니다..
제가 여러곳을 돌아 다녀 보아도 정말이지 제대로된 대답을 들을 수가 없어
서..이렇게 글을 씁니다..
 cgi 관하여인데..
모든 게정 사용자에게 cgi를 사용 할수 있게 하는 방법좀 알려주세요..
도무지 모르겠습니다..흑흑..알다가도요..
 제가 서버에 설치하고 체스트를 해보면 가상도메인 잡은 곳과 주도메인 잡
은 곳은
cgi가 잘 돌아 갑니다..
그러나..
www.XXXX.co.kr/~계정에서는 어디서두 cgi 가 안돌아 가네요..
여기...httpd.conf 두 올려 놓겠습니다..
돕움 바랍니다... 저의 미숙한점을 체크해주세요...# -FrontPage-
version=4.0
##
## httpd.conf -- Apache HTTP server configuration file
##
 #
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are
unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /usr/conf/srm.conf and then /usr/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server
process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default'
server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent
to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
 ### Section 1: Global Environment
#
# The directives in this section affect the overall operation of
Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
 #
# ServerType is either inetd, or standalone.  Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone
 #
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
 #
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left
at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A
LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/httpd.lock
 #
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid
 #
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this.  But if yours does (you'll know
because
# this file will be  created when you run Apache) then you *must*
ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard
 #
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order.  The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity.  The commented-out values
# below are the built-in defaults.  You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
 #
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
 #
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
 #
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
 #
# KeepAliveTimeout: Number of seconds to wait for the next request
from the
# same client on the same connection.
#
KeepAliveTimeout 15
 #
# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 20
 #
# Number of servers to start initially --- should be a reasonable
ballpark
# figure.
#
StartServers 8
 #
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
 #
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable
leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the
initial
#       request per connection. For example, if a child process handles
#       an initial request and 10 subsequent "keptalive" requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 100
 #
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
 #
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
 #
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `httpd -l' for the list of
already
# built-in (statically linked and thus always available) modules in
your httpd
# binary.
#
# Note: The order is which modules are loaded is important.  Don't
change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module         modules/mod_env.so
LoadModule config_log_module  modules/mod_log_config.so
LoadModule agent_log_module   modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module  modules/mod_mime_magic.so
LoadModule mime_module        modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module      modules/mod_status.so
LoadModule info_module        modules/mod_info.so
LoadModule includes_module    modules/mod_include.so
LoadModule autoindex_module   modules/mod_autoindex.so
LoadModule dir_module         modules/mod_dir.so
LoadModule cgi_module         modules/mod_cgi.so
LoadModule asis_module        modules/mod_asis.so
LoadModule imap_module        modules/mod_imap.so
LoadModule action_module      modules/mod_actions.so
#LoadModule speling_module     modules/mod_speling.so
LoadModule userdir_module     modules/mod_userdir.so
LoadModule alias_module       modules/mod_alias.so
LoadModule rewrite_module     modules/mod_rewrite.so
LoadModule access_module      modules/mod_access.so
LoadModule auth_module        modules/mod_auth.so
LoadModule anon_auth_module   modules/mod_auth_anon.so
LoadModule db_auth_module     modules/mod_auth_db.so
LoadModule digest_module      modules/mod_digest.so
LoadModule proxy_module       modules/libproxy.so
#LoadModule cern_meta_module   modules/mod_cern_meta.so
LoadModule expires_module     modules/mod_expires.so
LoadModule headers_module     modules/mod_headers.so
LoadModule usertrack_module   modules/mod_usertrack.so
#LoadModule example_module     modules/mod_example.so
#LoadModule unique_id_module   modules/mod_unique_id.so
LoadModule setenvif_module    modules/mod_setenvif.so
#LoadModule bandwidth_module   modules/mod_bandwidth.so
#LoadModule put_module          modules/mod_put.so
 # Extra Modules
LoadModule perl_module        modules/libperl.so
#LoadModule php_module         modules/mod_php.so
LoadModule php3_module        modules/libphp3.so
 #  Reconstruction of the complete module list from all available
modules
#  (static and shared ones) to achieve correct module execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_bandwidth.c
#AddModule mod_put.c
 # Extra Modules
AddModule mod_perl.c
#AddModule mod_php.c
AddModule mod_php3.c
 #
# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
 ### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
 #
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
 #
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80
 #
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and
the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group nobody on these systems!
#
User nobody
Group nobody
 #
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin    yuchioo at mail.com #
# ServerName: allows you to set a host name which is sent back to
clients for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP
address here.
# You will have to access it by its address (e.g.,
http://123.45.67.89/) # anyway, and this will make redirections work in a sensible way.
#
#ServerName 111.111.111.111
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot /home/httpd/html
 #
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
    Options FollowSymLinks
    AllowOverride All
</Directory>
 #
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
 #
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/home">
 #
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes Includes FollowSymLinks ExecCGI
 #
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination
of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
    AllowOverride All
 #
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>
 #
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
UserDir public_html
 #
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
ExecCGI
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
#        Order deny,allow
#        Deny from all
#    </Limit>
#</Directory>
 #
# DirectoryIndex: Name of the file or files to use as a pre-written
HTML
# directory index.  Separate multiple entries with spaces.
#
DirectoryIndex index.html index.htm index.shtml index.cgi
 #
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
 #
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^.ht">
    Order allow,deny
    Deny from all
</Files>
 #
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
 #
# UseCanonicalName: (new for 1.3)  With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On
 #
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types
 #
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value.  If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
 #
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed
if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile share/magic
</IfModule>
 #
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
 #
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log
 #
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
 #
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}
i"" combine
d
LogFormat "%h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
 #
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/httpd/access_log common
 #
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent
 #
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined
 #
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On
 #
# Aliases: Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server
will
# require it to be present in the URL.  So "/icons" isn't aliased in
this
# example, only "/icons/"..
#
Alias /icons/ "/home/httpd/icons/"
Alias /admin/ "/home/httpd/admin/"
Alias /guest/ "/home/httpd/guest/"
Alias /boards/ "/home/httpd/boards/"
 <Directory "/home/httpd/icons">
    Options Indexes MultiViews
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>
 <Directory "/home/httpd/log/">
    Options Indexes MultiViews
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
 <Directory "/home/httpd/guest/">
    Options Indexes MultiViews
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
 <Directory "/home/httpd/boards/">
    Options Indexes MultiViews
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to
the client.
# The same rules about trailing "/" apply to ScriptAlias directives as
to
# Alias.
#
Alias /cgi-bin/ "/home/*/"
 #Alias /admin/ "/home/httpd/admin/"
#Alias /guest/ "/home/httpd/guest/"
#Alias /boards/ "/home/httpd/boards/"
   #
# "/home/httpd/cgi-bin" should be changed to whatever your
ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/home/*">
    AllowOverride All
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>
 #<Directory "/home/httpd/admin">
#    AllowOverride All
#    Options ExecCGI
#    Order allow,deny
#    Allow from all
#</Directory>
 #<Directory "/home/httpd/guest">
#    AllowOverride All
#    Options ExecCGI
#    Order allow,deny
#    Allow from all
#</Directory>
 #<Directory "/home/httpd/boards">
#    AllowOverride All
#    Options ExecCGI
#    Order allow,deny
#    Allow from all
#</Directory>
#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
 #
# Directives controlling the display of server-generated directory
listings.
#
 #
# FancyIndexing: whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing
 #
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
 AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
 AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
 AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
 #
# DefaultIcon: which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
 #
# AddDescription: allows you to place a short description after a file
in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
 #
# ReadmeName: the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName: the name of a file which should be prepended to
# directory indexes.
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README
HeaderName HEADER
 #
# IndexIgnore: a set of filenames which directory indexing should
ignore
# and not include in the listing.  Shell-style wildcarding is
permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
 #
# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
 #
# AddLanguage: allows you to specify the language of a document. You
can
# then use content negotiation to give a browser a file in a language
# it can understand.  Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage
pl .po"
# to avoid the ambiguity with the common suffix for perl scripts.
#
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it
 #
# LanguagePriority: allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
#
LanguagePriority en fr de
 #
# AddType: allows you to tweak mime.types without actually editing it,
or to
# make certain files to be certain types.
#
# For example, the PHP3 module (not part of the Apache distribution -
see
# http://www.php.net) will typically use:
#
<IfModule mod_php3.c>
  AddType application/x-httpd-php3 .php3 .php .pl .phtml .html .htm
  AddType application/x-httpd-php3-source .phps
</IfModule>
 # The following is for PHP/FI (PHP2):
<IfModule mod_php.c>
  AddType application/x-httpd-php .phtml
</IfModule>
 AddType application/x-tar .tgz
 #
# AddHandler: allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the
server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi .pl
 #
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml
 #
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
 #
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map
 #
# To enable type maps, you might want to use
#
#AddHandler type-map var
 #
# Action: lets you define media types that will execute a script
whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
 #
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
 #
# MetaSuffix: specifies the file name suffix for the file containing
the
# meta information.
#
#MetaSuffix .meta
 #
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-
includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html #  N.B.: Many of the environment variables assoc
iated with the original #  request will *not* be available to such a script.
 #
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers
that
# spoof it. There are known problems with these browser
implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-
1.0
 #
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4.0" force-response-1.0
BrowserMatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0
  # If the perl module is installed, this will be enabled.
#
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
# You must unremark these two lines at the top of this file as well:
#LoadModule put_module          modules/mod_put.so
#AddModule mod_put.c
#
#Alias /upload /tmp
#<Location /upload>
#    EnablePut On
#    AuthType Basic
#    AuthName Temporary
#    AuthUserFile /etc/httpd/conf/passwd
#    EnableDelete Off
#    umask 007
#    <Limit PUT>
#       require valid-user
#    </Limit>
#</Location>
 #
# Allow server status reports, with the URL of
http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
 #
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
 # Allow access to local system documentation from localhost
Alias /doc/ /usr/doc/
<Location /doc>
  order deny,allow
  deny from all
  allow from localhost
  Options Indexes FollowSymLinks
</Location>
 #
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days.  This bug involved a CGI script distributed as a part of
Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org.  Or, you can record them yourself, using
the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi #</Location>
 #
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Directory>
 #
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via:
headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
 #
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/var/cache/httpd"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
 #</IfModule>
# End of proxy directives.
 ### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
 #
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
 #
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
  ...