alzza 6.2에 mysql 3.22.30을 설치하여 사용하고 있습니다.
데이타 특성상 테이블의 갯수가 많습니다.
테이블 갯수가 25000개 정도.
mysql에서 한 테이블당 존재하는 화일이 3개(*.ISD,*.ISM,*.frm)이니까
한 디렉토리에 화일 수가 75000개 있는 거죠.
그런데 perl로 mysql 서버에 접속하여 작업할 때 문제가 발생합니다.
- telnet connection이 끊기고,
- mysql 데이타의 손상이 있기도 하고,
- 심하면 서버 자체가 리부팅됩니다. 리부팅 될때 정상적인 shutdown 절차
를 따르지 않고, reset 버튼을 누른것과 같이 리부팅 됩니다. 당연히 부팅시
에 file system이 깨끗하게 unmount되지 않았다고 하면서 fsck가 실행되죠.
그래서 문제점을 발견하기 위하여 하드디스크와 마더 보드를 교환해 보았습
니다. 그리고 서버 자체를 바꿔보기도 하고(같은 회사의 같은 모델). 그런데
도 문제는 계속 발생하고.
서버의 파워 서플라이나 과열되서 그렇다면 매번 리부팅 될 텐데 그렇지 않
은걸 봐서는 하드웨어 자체의 결함 같지는 않습니다.
그레서 지금은 혐의를 두는 것은
- mysql 서버 자체 결함
- 리눅스에서의 화일 핸들
이중에 제가 묻고 싶은 것은 혹시 리눅스에서 처리할 수 있는 화일의 최대
갯수가 얼마나 되는 것이가 입니다. 특히 한 디렉토리 내에서의 최대 화일
갯수와 관련 지어서
다음은 문제가 발생했을 때의 /var/log/messages 에 기록되 로그입니다.
문제가 발생한 이후의 것입니다.
도움을 부탁드립니다.
####################################################################
Aug 29 04:49:34 kse-base syslogd 1.3-3: restart.
Aug 29 04:49:34 kse-base syslog: syslogd startup succeeded
Aug 29 04:49:34 kse-base kernel: klogd 1.3-3, log source = /proc/kmsg
started.
Aug 29 04:49:34 kse-base kernel: Inspecting /boot/System.map-2.2.16-
3.azsmp
Aug 29 04:49:34 kse-base syslog: klogd startup succeeded
Aug 29 04:49:34 kse-base kernel: Loaded 7465 symbols
from /boot/System.map-2.2.16-3.azsmp.
Aug 29 04:49:34 kse-base kernel: Symbols match kernel version 2.2.16.
Aug 29 04:49:34 kse-base kernel: Loaded 108 symbols from 4 modules.
Aug 29 04:49:34 kse-base kernel: Linux version 2.2.16-3.azsmp
(root at alzza.alzzalinux.org) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #1 SMP Fri Jul 21 13:56:40 KST 2000
Aug 29 04:49:34 kse-base kernel: Intel MultiProcessor Specification
v1.4
Aug 29 04:49:34 kse-base kernel: Virtual Wire compatibility mode.
Aug 29 04:49:34 kse-base kernel: OEM ID: INTEL Product ID:
Lancewood APIC at: 0xFEE00000
Aug 29 04:49:34 kse-base kernel: Processor #1 Pentium(tm) Pro APIC
version 17
Aug 29 04:49:34 kse-base kernel: Processor #0 Pentium(tm) Pro APIC
version 17
Aug 29 04:49:34 kse-base kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Aug 29 04:49:34 kse-base kernel: Processors:2
Aug 29 04:49:34 kse-base kernel: mapped APIC to ffffe000 (fee00000)
Aug 29 04:49:34 kse-base kernel: mapped IOAPIC to ffffd000 (fec00000)
Aug 29 04:49:34 kse-base kernel: relocating initrd image:
Aug 29 04:49:34 kse-base kernel: initrd_start:0xc0f94000
initrd_end:0xc0fffad9
Aug 29 04:49:34 kse-base kernel: mem_start:0xc0299000
mem_end:0xdfff0000
Aug 29 04:49:34 kse-base kernel: initrd_size:0x0006bad9
dest:0xdff84000
Aug 29 04:49:34 kse-base kernel: Detected 596930 kHz processor.
Aug 29 04:49:34 kse-base kernel: Console: colour VGA+ 80x25
Aug 29 04:49:34 kse-base kernel: Calibrating delay loop... 1189.48
BogoMIPS
Aug 29 04:49:34 kse-base kernel: Memory: 516536k/524224k available
(1096k kernel code, 424k reserved, 5660k data, 76k init, 0k bigmem)
Aug 29 04:49:34 kse-base kernel: Dentry hash table entries: 262144
(order 9, 2048k)
Aug 29 04:49:34 kse-base kernel: Buffer cache hash table entries:
524288 (order 9, 2048k)
Aug 29 04:49:34 kse-base kernel: Page cache hash table entries: 131072
(order 7, 512k)
Aug 29 04:49:34 kse-base kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Aug 29 04:49:34 kse-base kernel: Pentium-III serial number disabled.
Aug 29 04:49:34 kse-base kernel: Checking 386/387 coupling... OK, FPU
using exception 16 error reporting.
Aug 29 04:49:34 kse-base kernel: Checking 'hlt' instruction... OK.
Aug 29 04:49:34 kse-base kernel: POSIX conformance testing by UNIFIX
Aug 29 04:49:34 kse-base kernel: mtrr: v1.35a (19990819) Richard Gooch
(rgooch at atnf.csiro.au)
Aug 29 04:49:34 kse-base kernel: Pentium-III serial number disabled.
Aug 29 04:49:34 kse-base kernel: per-CPU timeslice cutoff: 99.99
usecs.
Aug 29 04:49:34 kse-base kernel: CPU1: Intel Pentium III (Katmai)
stepping 03
Aug 29 04:49:34 kse-base kernel: calibrating APIC timer ...
Aug 29 04:49:34 kse-base kernel: ..... CPU clock speed is 596.9266
MHz.
Aug 29 04:49:34 kse-base kernel: ..... system bus clock speed is
99.4876 MHz.
Aug 29 04:49:34 kse-base kernel: Booting processor 0 eip 2000
Aug 29 04:49:34 kse-base kernel: Calibrating delay loop... 1192.76
BogoMIPS
Aug 29 04:49:34 kse-base kernel: Pentium-III serial number disabled.
Aug 29 04:49:34 kse-base kernel: OK.
Aug 29 04:49:34 kse-base kernel: CPU0: Intel Pentium III (Katmai)
stepping 03
Aug 29 04:49:34 kse-base kernel: Total of 2 processors activated
(2382.23 BogoMIPS).
Aug 29 04:49:34 kse-base kernel: enabling symmetric IO
mode... ...done.
Aug 29 04:49:34 kse-base kernel: ENABLING IO-APIC IRQs
Aug 29 04:49:34 kse-base kernel: init IO_APIC IRQs
Aug 29 04:49:34 kse-base kernel: IO-APIC (apicid-pin) 2-0, 2-9, 2-10,
2-11, 2-16, 2-17, 2-18, 2-20, 2-22, 2-23 not connected.
Aug 29 04:49:34 kse-base kernel: number of MP IRQ sources: 17.
Aug 29 04:49:34 kse-base kernel: number of IO-APIC #2 registers: 24.
Aug 29 04:49:34 kse-base kernel: testing the IO
APIC.......................
Aug 29 04:49:34 kse-base kernel:
Aug 29 04:49:34 kse-base kernel: IO APIC #2......
Aug 29 04:49:34 kse-base kernel: .... register #00: 02000000
Aug 29 04:49:34 kse-base kernel: ....... : physical APIC id: 02
Aug 29 04:49:34 kse-base kernel: .... register #01: 00170011
Aug 29 04:49:34 kse-base kernel: ....... : max redirection
entries: 0017
Aug 29 04:49:34 kse-base kernel: ....... : IO APIC version: 0011
Aug 29 04:49:34 kse-base kernel: .... register #02: 00000000
Aug 29 04:49:34 kse-base kernel: ....... : arbitration: 00
Aug 29 04:49:34 kse-base kernel: .... IRQ redirection table:
Aug 29 04:49:34 kse-base kernel: NR Log Phy Mask Trig IRR Pol Stat
Dest Deli Vect:
Aug 29 04:49:34 kse-base kernel: 00 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 01 000 00 0 0 0 0 0
1 1 59
Aug 29 04:49:34 kse-base kernel: 02 0FF 0F 0 0 0 0 0
1 1 51
Aug 29 04:49:34 kse-base kernel: 03 000 00 0 0 0 0 0
1 1 61
Aug 29 04:49:34 kse-base kernel: 04 000 00 0 0 0 0 0
1 1 69
Aug 29 04:49:34 kse-base kernel: 05 000 00 0 0 0 0 0
1 1 71
Aug 29 04:49:34 kse-base kernel: 06 000 00 0 0 0 0 0
1 1 79
Aug 29 04:49:34 kse-base kernel: 07 000 00 0 0 0 0 0
1 1 81
Aug 29 04:49:34 kse-base kernel: 08 000 00 0 0 0 0 0
1 1 89
Aug 29 04:49:34 kse-base kernel: 09 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 0a 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 0b 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 0c 000 00 0 0 0 0 0
1 1 91
Aug 29 04:49:34 kse-base kernel: 0d 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 0e 000 00 0 0 0 0 0
1 1 99
Aug 29 04:49:34 kse-base kernel: 0f 000 00 0 0 0 0 0
1 1 A1
Aug 29 04:49:34 kse-base kernel: 10 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 11 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 12 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 13 0FF 0F 1 1 0 1 0
1 1 A9
Aug 29 04:49:34 kse-base kernel: 14 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 15 0FF 0F 1 1 0 1 0
1 1 B1
Aug 29 04:49:34 kse-base kernel: 16 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: 17 000 00 1 0 0 0 0
0 0 00
Aug 29 04:49:34 kse-base kernel: ....................................
done.
Aug 29 04:49:34 kse-base kernel: checking TSC synchronization across
CPUs: passed.
Aug 29 04:49:34 kse-base kernel: PCI: PCI BIOS revision 2.10 entry at
0xfdab0
Aug 29 04:49:34 kse-base kernel: PCI: Using configuration type 1
Aug 29 04:49:34 kse-base kernel: PCI: Probing PCI hardware
Aug 29 04:49:34 kse-base kernel: PCI->APIC IRQ transform: (B0,I12,P0) -
> 19
Aug 29 04:49:34 kse-base kernel: PCI->APIC IRQ transform: (B0,I12,P0) -
> 19
Aug 29 04:49:34 kse-base identd: identd startup succeeded
Aug 29 04:49:34 kse-base kernel: PCI->APIC IRQ transform: (B0,I14,P0) -
> 21
Aug 29 04:49:34 kse-base kernel: PCI->APIC IRQ transform: (B0,I18,P3) -
> 21
Aug 29 04:49:34 kse-base kernel: Linux NET4.0 for Linux 2.2
Aug 29 04:49:34 kse-base kernel: Based upon Swansea University
Computer Society NET3.039
Aug 29 04:49:34 kse-base kernel: NET4: Unix domain sockets 1.0 for
Linux NET4.0.
Aug 29 04:49:34 kse-base kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Aug 29 04:49:34 kse-base kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Aug 29 04:49:34 kse-base kernel: TCP: Hash tables configured (ehash
524288 bhash 65536)
Aug 29 04:49:34 kse-base kernel: Initializing RT netlink socket
Aug 29 04:49:34 kse-base kernel: Starting kswapd v 1.5
Aug 29 04:49:34 kse-base kernel: Detected PS/2 Mouse Port.
Aug 29 04:49:34 kse-base kernel: Serial driver version 4.27 with
MANY_PORTS MULTIPORT SHARE_IRQ enabled
Aug 29 04:49:34 kse-base kernel: ttyS00 at 0x03f8 (irq = 4) is a
16550A
Aug 29 04:49:34 kse-base kernel: ttyS01 at 0x02f8 (irq = 3) is a
16550A
Aug 29 04:49:34 kse-base kernel: pty: 256 Unix98 ptys configured
Aug 29 04:49:34 kse-base kernel: apm: BIOS not found.
Aug 29 04:49:34 kse-base kernel: Real Time Clock Driver v1.09
Aug 29 04:49:34 kse-base kernel: RAM disk driver initialized: 16 RAM
disks of 4096K size
Aug 29 04:49:34 kse-base kernel: PIIX4: IDE controller on PCI bus 00
dev 91
Aug 29 04:49:34 kse-base kernel: PIIX4: not 100% native mode: will
probe irqs later
Aug 29 04:49:34 kse-base kernel: ide0: BM-DMA at 0x2860-0x2867,
BIOS settings: hda:DMA, hdb:pio
Aug 29 04:49:34 kse-base kernel: ide1: BM-DMA at 0x2868-0x286f,
BIOS settings: hdc:pio, hdd:pio
Aug 29 04:49:34 kse-base kernel: hda: SAMSUNG CD-ROM SC-148F, ATAPI
CDROM drive
Aug 29 04:49:34 kse-base kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 29 04:49:34 kse-base kernel: hda: ATAPI 48X CD-ROM drive, 128kB
Cache
Aug 29 04:49:34 kse-base kernel: Uniform CD-ROM driver Revision: 3.10
Aug 29 04:49:34 kse-base kernel: Floppy drive(s): fd0 is 1.44M
Aug 29 04:49:34 kse-base kernel: FDC 0 is a National Semiconductor
PC87306
Aug 29 04:49:34 kse-base kernel: md driver 0.90.0 MAX_MD_DEVS=256,
MAX_REAL=12
Aug 29 04:49:34 kse-base kernel: raid5: measuring checksumming speed
Aug 29 04:49:34 kse-base kernel: raid5: MMX detected, trying high-
speed MMX checksum routines
Aug 29 04:49:34 kse-base kernel: pII_mmx : 1340.739 MB/sec
Aug 29 04:49:34 kse-base kernel: p5_mmx : 1396.746 MB/sec
Aug 29 04:49:34 kse-base kernel: 8regs : 1025.652 MB/sec
Aug 29 04:49:34 kse-base kernel: 32regs : 603.123 MB/sec
Aug 29 04:49:34 kse-base kernel: using fastest function: p5_mmx
(1396.746 MB/sec)
Aug 29 04:49:34 kse-base kernel: scsi : 0 hosts.
Aug 29 04:49:34 kse-base kernel: scsi : detected total.
Aug 29 04:49:34 kse-base kernel: md.c: sizeof(mdp_super_t) = 4096
Aug 29 04:49:34 kse-base kernel: Partition check:
Aug 29 04:49:34 kse-base kernel: RAMDISK: Compressed image found at
block 0
Aug 29 04:49:34 kse-base kernel: autodetecting RAID arrays
Aug 29 04:49:34 kse-base kernel: autorun ...
Aug 29 04:49:34 kse-base kernel: ... autorun DONE.
Aug 29 04:49:34 kse-base kernel: VFS: Mounted root (ext2 filesystem).
Aug 29 04:49:34 kse-base kernel: (scsi0) <Adaptec AIC-7896/7 Ultra2
SCSI host adapter> found at PCI 0/12/0
Aug 29 04:49:34 kse-base kernel: (scsi0) Wide Channel A, SCSI ID=7,
32/255 SCBs
Aug 29 04:49:34 kse-base kernel: (scsi0) Downloading sequencer code...
392 instructions downloaded
Aug 29 04:49:34 kse-base kernel: (scsi1) <Adaptec AIC-7896/7 Ultra2
SCSI host adapter> found at PCI 0/12/1
Aug 29 04:49:34 kse-base kernel: (scsi1) Wide Channel B, SCSI ID=7,
32/255 SCBs
Aug 29 04:49:34 kse-base kernel: (scsi1) Downloading sequencer code...
392 instructions downloaded
Aug 29 04:49:34 kse-base kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.30/3.2.4
Aug 29 04:49:34 kse-base kernel: <Adaptec AIC-7896/7 Ultra2
SCSI host adapter>
Aug 29 04:49:34 kse-base kernel: scsi1 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.30/3.2.4
Aug 29 04:49:34 kse-base kernel: <Adaptec AIC-7896/7 Ultra2
SCSI host adapter>
Aug 29 04:49:34 kse-base kernel: scsi : 2 hosts.
Aug 29 04:49:34 kse-base kernel: (scsi0:0:0:0) Synchronous at 80.0
Mbyte/sec, offset 31.
Aug 29 04:49:34 kse-base kernel: Vendor: IBM Model: DNES-
309170W Rev: SA30
Aug 29 04:49:34 kse-base kernel: Type: Direct-
Access ANSI SCSI revision: 03
Aug 29 04:49:34 kse-base kernel: Detected scsi disk sda at scsi0,
channel 0, id 0, lun 0
Aug 29 04:49:34 kse-base kernel: (scsi0:0:3:0) Synchronous at 80.0
Mbyte/sec, offset 31.
Aug 29 04:49:34 kse-base kernel: Vendor: IFT Model:
3102 Rev:0223
Aug 29 04:49:34 kse-base kernel: Type: Direct-
Access ANSI SCSI revision: 02
Aug 29 04:49:34 kse-base kernel: Detected scsi disk sdb at scsi0,
channel 0, id 3, lun 0
Aug 29 04:49:34 kse-base kernel: SCSI device sda: hdwr sector= 512
bytes. Sectors= 17916240 [8748 MB] [8.7 GB]
Aug 29 04:49:34 kse-base kernel: sda: sda1 sda2 < sda5 sda6 >
Aug 29 04:49:34 kse-base kernel: SCSI device sdb: hdwr sector= 512
bytes. Sectors= 35843328 [17501 MB] [17.5 GB]
Aug 29 04:49:34 kse-base kernel: sdb: sdb1 sdb2 < sdb5 sdb6 >
Aug 29 04:49:34 kse-base kernel: autodetecting RAID arrays
Aug 29 04:49:34 kse-base kernel: autorun ...
Aug 29 04:49:34 kse-base kernel: ... autorun DONE.
Aug 29 04:49:34 kse-base kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Aug 29 04:49:34 kse-base kernel: change_root: old root has d_count=1
Aug 29 04:49:34 kse-base kernel: Trying to unmount old root ... okay
Aug 29 04:49:34 kse-base kernel: Freeing unused kernel memory: 76k
freed
Aug 29 04:49:34 kse-base kernel: Adding Swap:265032k swap-space
(priority -1)
Aug 29 04:49:34 kse-base kernel: Adding Swap:265032k swap-space
(priority -2)
Aug 29 04:49:34 kse-base kernel: eepro100.c:v1.09j-t 9/29/99 Donald
Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html Aug 29 04:49:34 kse-base kernel: eepro100.c: $Revision:1
.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <saw at saw.sw.com.sg> and
others
Aug 29 04:49:34 kse-base kernel: eth0: Intel PCI EtherExpress Pro100
82557, 00:D0:B7:88:6E:E4, IRQ 21.
Aug 29 04:49:34 kse-base kernel: Receiver lock-up bug exists --
enabling work-around.
Aug 29 04:49:34 kse-base kernel: Board assembly 000000-000, Physical
connectors present: RJ45
Aug 29 04:49:34 kse-base kernel: Primary interface chip i82555 PHY
#1.
Aug 29 04:49:34 kse-base kernel: General self-test: passed.
Aug 29 04:49:34 kse-base kernel: Serial sub-system self-test:
passed.
Aug 29 04:49:34 kse-base kernel: Internal registers self-test:
passed.
Aug 29 04:49:34 kse-base kernel: ROM checksum self-test: passed
(0x04f4518b).
Aug 29 04:49:34 kse-base atd: atd startup succeeded
Aug 29 04:49:35 kse-base crond: crond startup succeeded
Aug 29 04:49:35 kse-base rc: Starting pcmcia succeeded
Aug 29 04:49:35 kse-base scandetd: scandetd started and ready
Aug 29 04:49:35 kse-base scandetd: scandetd startup succeeded
Aug 29 04:49:35 kse-base inet: inetd startup succeeded
Aug 29 04:49:35 kse-base sshd: Starting sshd:
Aug 29 04:49:35 kse-base sshd[523]: Server listening on 0.0.0.0 port
22.
Aug 29 04:49:35 kse-base sshd[523]: Generating 768 bit RSA key.
Aug 29 04:49:35 kse-base sshd: sshd startup succeeded
Aug 29 04:49:35 kse-base sshd: ^[[60G
Aug 29 04:49:35 kse-base sshd:
Aug 29 04:49:35 kse-base rc: Starting sshd succeeded
Aug 29 04:49:35 kse-base lpd: lpd startup succeeded
Aug 29 04:49:35 kse-base lpd[538]: restarted
Aug 29 04:49:35 kse-base keytable: Loading keymap:
Aug 29 04:49:35 kse-base keytable:
Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Aug 29 04:49:35 kse-base sshd[523]: RSA key generation complete.
Aug 29 04:49:35 kse-base keytable: Loading system font:
Aug 29 04:49:35 kse-base rc: Starting keytable succeeded
Aug 29 04:49:36 kse-base sendmail: sendmail startup succeeded
Aug 29 04:49:36 kse-base gpm: gpm startup succeeded
Aug 29 04:49:36 kse-base proftpd[616]: kse-base.vipstock.com - ProFTPD
1.2.0pre10 standalone mode STARTUP
Aug 29 04:49:36 kse-base proftpd: proftpd startup succeeded
Aug 29 04:49:36 kse-base xfs: xfs startup succeeded
Aug 29 04:49:36 kse-base scandetd: telnet connection attempt from
211.53.6.130
Aug 29 04:49:36 kse-base xfs: Warning: The
directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
Aug 29 04:49:36 kse-base xfs: Entry deleted from font path.
Aug 29 04:49:36 kse-base xfs: Warning: The
directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
Aug 29 04:49:36 kse-base xfs: Entry deleted from font path.
Aug 29 04:49:36 kse-base xfs: Warning: The
directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Aug 29 04:49:36 kse-base xfs: Entry deleted from font path.
Aug 29 04:49:36 kse-base xfs: Warning: The
directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist.
Aug 29 04:49:36 kse-base xfs: Entry deleted from font path.
Aug 29 04:49:36 kse-base xfs: Warning: The
directory "/usr/share/fonts/default/TrueType" does not exist.
Aug 29 04:49:36 kse-base xfs: Entry deleted from font path.
Aug 29 04:49:37 kse-base alzza-firewall: Securing your system succeeded
Aug 29 04:49:37 kse-base linuxconf: Linuxconf final setup
Aug 29 04:49:38 kse-base PAM_pwdb[653]: (login) session opened for
user mysql by (uid=0)
Aug 29 04:49:38 kse-base [653]: LOGIN ON pts/0 BY mysql FROM
211.53.6.130
Aug 29 04:49:38 kse-base rc: Starting linuxconf succeeded
Aug 29 04:49:57 kse-base scandetd: telnet connection attempt from
211.53.6.130
Aug 29 04:49:57 kse-base PAM_pwdb[766]: (login) session opened for
user mysql by (uid=0)
Aug 29 04:49:57 kse-base [766]: LOGIN ON pts/1 BY mysql FROM
211.53.6.130
Aug 29 04:50:02 kse-base scandetd: telnet connection attempt from
211.53.6.130
Aug 29 04:50:02 kse-base PAM_pwdb[796]: (login) session opened for
user mysql by (uid=0)
Aug 29 04:50:02 kse-base [796]: LOGIN ON pts/2 BY mysql FROM
211.53.6.130
Aug 29 04:50:13 kse-base 8월 29 04:50:13 PAM_pwdb[825]: (su) session
opened for user root by mysql(uid=500)
Aug 29 04:50:23 kse-base scandetd: mysql connection attempt from kse-
base.vipstock.com
Aug 29 04:51:47 kse-base last message repeated 14 times
Aug 29 04:53:28 kse-base last message repeated 4 times
Aug 29 04:56:01 kse-base last message repeated 4 times
Aug 29 04:56:37 kse-base last message repeated 3 times
Aug 29 04:57:05 kse-base scandetd: Possible port scanning from kse-
base.vipstock.com
Aug 29 04:57:05 kse-base scandetd: smtp connection attempt from kse-
base.vipstock.com
Aug 29 04:57:05 kse-base scandetd: auth connection attempt from kse-
base.vipstock.com
Aug 29 04:57:05 kse-base sendmail[913]: unable to
dlopen /usr/lib/sasl/libdigestmd5.so: /usr/lib/sasl/libdigestmd5.so:
undefined symbol: RC4_set_key