이리저리 삽질하다가 현재 dmesg보니까 뭔가 잡힌 것 같기는 한데
/proc/bus/usb나 /proc/scsi/scsi가 텅 비어있습니다.
무슨 문제인지 모르겠습니다.
kernel-2.4.19, 카메라 F-Cam(ㅡㅡ;;)메이드인 차이나에요.
다음은 dmesg중 발췌한 것입니다.
===========================================================
/***이게 무슨 에러인지 모르겠습니다***/
SCSI subsystem driver Revision:1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
/**usb관련 메세지는 많이 뜨기는 합니다***/
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
....
uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF cfea35c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d800
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cfea35c0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Found IRQ 11 for device 00:07.3
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:0b.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
uhci.c: detected 2 ports
usb.c: kmalloc IF cfea37c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: dc00
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cfea37c0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver usblp
...
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
ds: no socket drivers loaded!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
uhci.c: dc00: suspend_hc
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
uhci.c: root-hub INT complete: port1: 499 port2: 48a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
hub.c: port 1, portstatus 101, change 2, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
uhci.c: root-hub INT complete: port1: 495 port2: 48a data: 4
usb.c: kmalloc IF cfefbbc0, numif 2
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
/****요기서 카메라 얘기가 나오는 것 같은데요
드라이버가 없다는 이야기 인가요? ****/
Manufacturer: DIGITAL CAMERA
Product: DIGITAL CAMERA
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0xd64/0x1021) is not claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 0d64:1021
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0065
bNumInterfaces = 02
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 240mA
Interface:0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = ff:ff:ff
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 02 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Interface:1
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 01
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = ff:ff:ff
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 01 (Isochronous)
wMaxPacketSize = 0000
bInterval = 01
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Alternate Setting: 1
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 01
bAlternateSetting = 01
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = ff:ff:ff
iInterface = 05
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 01 (Isochronous)
wMaxPacketSize = 0380
bInterval = 01
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Alternate Setting: 2
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 01
bAlternateSetting = 02
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = ff:ff:ff
iInterface = 06
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 01 (Isochronous)
wMaxPacketSize = 01d0
bInterval = 01
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 2
uhci.c: root-hub INT complete: port1: 495 port2: 48a data: 4
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 2, 12 Mb/s
hub.c: port 2 enable change, status 100
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 588 port2: 588 data: 6
hub.c: port 1, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 1 enable change, status 300
hub.c: port 2, portstatus 300, change 2, 1.5 Mb/s
hub.c: port 2 enable change, status 300
....
======================================================
흠.. 제가 좀 뜯어보기는 했습니다만..
보이는게 글자일 뿐.. 무슨 메시지인지 잘 모르겠습니다.
조언 좀 부탁합니다.--넉넉히풀어헤쳐그대를감싸리라