: : : 성공 하신분 있나요?
: : :
: : : 있는지 없는지 만 알고 시퍼서
: : :
: : : 전 암만 해도 안되거든요
: :
: :
: : 저요... 포트 바꾸면 됩니다..음..
: :
: : dns mail 웹(포트변경) telnet ssh
: :
: :
: : http;//xjoin.net:8880
: :
: : 음..
: :
: : --
: : 열심히 삽질하자 허접 삽질 엽기삽질
: : 삶이 속일지라도 세상이 속일지라도 난 포기 하지 않는다
: : http://xjoin.net:8880 :
: 포트를 바꿧는데도 안됩니다.
:
: vi /etc/profptd/proftpd.conf
:
: port 8021
:
: 로 바꿧습니다.
:
: 웹은 8080으로 하니까 되는데
:
: ftp는 안되네요
:
: 야야님 케이블이 확실 한지요?
:
: 전 pppoe 사용하지 않고 dhcp로 ip받아오거든여
:
:
: 여기 질답란에 있는 많은 양의 답변들 모두 다 해봤는데도 안됩니다.
:
: 머가 잘못 된걸까요..
:
: # /etc/services
:
: ftp-data 20/tcp
: ftp-data 20/udp
: ftp 8021/tcp
: ftp 8021/udp
: ssh 22/tcp # SSH Remote Login Protocol
: ssh 22/udp # SSH Remote Login Protocol
: telnet 23/tcp
: telnet 23/udp
:
: # /etc/proftpd.conf
:
: ServerType standalone
: #ServerType inetd
: DefaultServer off
: ServerAdmin root@localhost :
: UseReverseDNS off
: IdentLookups off
:
: Port 8021
:
: # ifconfig
:
: eth0 Link encap:Ethernet HWaddr 00:00:1C:D3:FE:94
: inet addr:218.235.216.24 Bcast:218.235.216.255 Mask:255.255.255.0
: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
: RX packets:766372 errors:0 dropped:0 overruns:0 frame:0
: TX packets:600848 errors:0 dropped:0 overruns:0 carrier:0
: collisions:0 txqueuelen:100
: RX bytes:96597801 (92.1 Mb) TX bytes:42416848 (40.4 Mb)
: Interrupt:9 Base address:0xa000
:
: eth1 Link encap:Ethernet HWaddr 00:04:E2:1F:E7:4F
: inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
: RX packets:588795 errors:0 dropped:0 overruns:0 frame:0
: TX packets:579571 errors:7 dropped:0 overruns:1 carrier:12
: collisions:0 txqueuelen:100
: RX bytes:41711298 (39.7 Mb) TX bytes:83051271 (79.2 Mb)
: Interrupt:10 Base address:0xec00
:
: lo Link encap:Local Loopback
: inet addr:127.0.0.1 Mask:255.0.0.0
: UP LOOPBACK RUNNING MTU:16436 Metric:1
: RX packets:4 errors:0 dropped:0 overruns:0 frame:0
: TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
: collisions:0 txqueuelen:0
: RX bytes:392 (392.0 b) TX bytes:392 (392.0 b)
:
: # /etc/sysconfig/network-scripts/ifcfg-eth0
:
: DEVICE=eth0
: ONBOOT=yes
: BOOTPROTO=dhcp
:
: # /etc/dhcpcd/dhcpcd-eht0.info
: IPADDR=211.209.150.38
: NETMASK=255.255.255.0
: NETWORK=211.209.150.0
: BROADCAST=211.209.150.255
: GATEWAY=211.209.150.1
: DOMAIN=hananet.net
: DNS=210.220.163.82,210.94.6.67,164.124.101.2
: DHCPSID=211.117.208.53
: DHCPGIADDR=211.179.154.1
: DHCPSIADDR=211.117.208.53
: DHCPCHADDR=00:00:1C:D3:FE:94
: DHCPSHADDR=00:00:1C:D3:FE:94
: DHCPSNAME=
: LEASETIME=3600
: RENEWALTIME=1800
: REBINDTIME=3150
:
: # /etc/dhcpd.conf
:
: subnet 192.168.1.0 netmask 255.255.255.0 {
: range 192.168.1.2 192.168.1.10;
:
: option domain-name-server 210.220.163.82,210.94.6.67,164.126.101.2;
:
: option routers 192.168.1.1;
: option ip-forwarding on;
: option broadcast-address 192.168.1.255;
: option subnet-mask 255.255.255.0;
:
: default-lease-time 864000;
: max-lease-time 86400;
: }
:
: # iptables -L
: Chain INPUT (policy ACCEPT)
: target prot opt source destination
:
: Chain FORWARD (policy ACCEPT)
: target prot opt source destination
: ACCEPT all -- anywhere anywhere state RELATED,ESTABL
: ISHED
: ACCEPT all -- anywhere anywhere
: LOG all -- anywhere anywhere LOG level warning
:
: Chain OUTPUT (policy ACCEPT)
: target prot opt source destination
:
: 음.. 여기 질답란에서 해보란거 다해봤는데도 안됩니다.
:
: 환-_-장
:
: 님 보시기에는 무엇때문에 안 되는거 같은지..
:
: 답변 부탁드립니다 ㅡ_ㅜ
ftp 에서 하는것은 두가지 입니다...
proftpd.conf 에서 포트 변경...
서비스 에서 포트 변경..
데몬이 정상 가동 한다면..
netstat -ant
tcp 0 0 0.0.0.0:8821 0.0.0.0:* LISTEN
하시면 변경한 포트가 나올것임..
데몬도 정상이고
netstat -ant 하면 나온다 그러면..
아마도 firewall 문제 입니다.--열심히 삽질하자 허접 삽질 엽기삽질
삶이 속일지라도 세상이 속일지라도 난 포기 하지 않는다
http://xjoin.net:8880