한통 ADSL 내장형을 사용중입니다 (삼성 AHT-N100)
리눅스 버젼은 Red Hat 7.3
 ADSL 연결을 위해 삼성전기에서 나온 드라이버라든지
다른 여러 개발버젼이라든지 여기 저기 게시판에서 잘 된다는
버젼을 두루두루 깔아도 보았지만 eth0 은 결국 생기지가 않았습니다.
 그러다 마지막으로 가장 최신으로 깔아보고 이 마저도 안된다면
( rp-pppoe 3.5.1 / Twin1483-2.4.16.o )
운명이려니 하고 외장형으로의 교체를 생각하고 실행했는데
떡하니 eth0 이 뜨고 SHOWTIME_LO 가 보이는 게 아니겠습니까?
아 됐구나하고 adsl-start 를 실행하니 컴퓨터 자체가 뻗어버리는 겁니다.
마우스는 고정되고 키보드도 안 먹고 키보드의 Caps Lock 과 Scroll
Lock 의 LED 만 깜빡깜빡하고 ....
재부팅 하면 하드디스크 integrity check 인가를 해야된다고 뜨고...
 adsl-start 말고도 adsl-connect 나 tkpppoe 등으로 연결을 시도해봤지만
똑같은 현상이 생깁니다.
dmesg 를 실행했을 때 SHOWTIME_LO 메세지에만 촛점을 맞추어
터미널 메세지의 아랫부분만 보아왔는데 마우스 휠을 올리니
여기저기 충돌하고 에러가 난게 많더군요.
(하드디스크와 VGA )
맘편하게 외장형으로 교체하면 (교체가 가능할지도 의문이지만)
쉽게 될 것 같지만 저 에러들을 해결하면 ADSL 을 사용할 수 있을 것 같아서
여기에 글 올립니다.
 ( 며칠동안 이 문제를 생각하고 바꿔보고 하다보니 여러 명령어들은
자동으로 익숙해졌습니다. 성공하겠다는 오기도 생기구요. )
 꼭 adsl 의 문제만이 아니더라도 저런 충돌이 생기면 해결하는 방법을
아신다면 많은 조언 부탁드립니다.
아래 내용은 dmesg 실행시의 메세지입니다.
(조금 길어서 중간에 생략했습니다.)
 ----------------------------------------------------------------------
 v 16:41 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:41 (hdd), sector 6
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:42 (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:42 (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:42 (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:42 (hdd), sector 6
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:43 (hdd), sector 0
 ( 중략 )
 ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5e (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5e (hdd), sector 6
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5f (hdd), sector 0
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5f (hdd), sector 2
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5f (hdd), sector 4
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:5f (hdd), sector 6
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
[drm:radeon_cp_indirect] *ERROR* process 1214 using buffer owned by 0
itexadsl: LINUX_VERSION_CODE = 132111 (0x2040f)
itexadsl: vpi/vci=0/32 framing=1
itexadsl: version= 2.2.7.ITEXPC86.0005 , built date= Thu Feb  7
11:16:17 PST 2002
itexadsl: card# 0, ix=0x0, bus=0x0, fn=0x60, ven=0x1471, dev=0x188
itexadsl: total 1 card(s) found.
itexadsl: irq=0xb, ioaddr=0xec00, membase=0xdfff0000
itexadsl: card #0 - MAC:00:02:78:70:b2:5d from eeprom.
itexadsl: ITeX i90134 chip.
eth0: Hardware address :  00:02:78:70:b2:5d
Into the GenCRC10Table
Finished the GenCRC10Table
itexadsl: modem line disconnected.
card #0 - current modem state : ACTIVATING.
card #0 - current modem state : INITIALIZING.
itexadsl: modem line connected. (card_no: 0)
itexadsl: upstream latency - interleaved
itexadsl: downstream latency - interleaved
itexadsl: card #0 - data rate: 480 / 8064  (line rate: 576 / 8160) kbps
card #0 - current modem state : SHOWTIME_L0.
InsertOAMF5Info: Vpi = 0, Vci = 32
Finish InsertOAMF5Info
Into the CAtmOAMF5Init
Finish CAtmOAMF5Init
 ----------------------------------------------------------------------