<pre>
랜카드가 여러개일경우
eth0     10.0.0.1
eth1     10.0.0.2
eth2     10.0.0.3
eth3     10.0.0.4
...      ...
 랜카드가 1개일경우
eth0     10.0.0.1   
eth0:0   10.0.0.2
eth0:1   10.0.0.3
eth0:2   10.0.0.4 
...      ...
  http://kldp.org 에 가서 믿을만한 문서를 반드시 확인하셔요,,
잠결에 쓴거라 맞는지 몰것슴돠,,
-_-;
 [root@Zeus /]# ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 172.31.0.6 netmask 0xfffffff8 broadcast 172.31.0.7
        ether 00:30:4f:06:7c:9d
        media: autoselect (none) status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseT
X <hw-loopback> rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.6 netmask 0xfffffff8 broadcast 10.0.0.7
        ether 00:a0:b0:0d:65:8f
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseT
X <hw-loopback> ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 155.230.157.93 netmask 0xfffffc00 broadcast 155.230.159.255
        inet 155.230.157.94 netmask 0xfffffc00 broadcast 155.230.159.255
        inet 155.230.157.85 netmask 0xfffffc00 broadcast 155.230.159.255
        inet 155.230.157.100 netmask 0xfffffc00 broadcast 155.230.159.255
        ether 00:50:4d:00:5d:f3
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
[root@Zeus /]#
 --
==================
헛소리 하는 daemon
==================
</pre>