jsp한번 설치해서 사용하려고 했던게 오기가 생겨서 계속 하고있습니다.^^;;
서블릿도 작동하는줄 알았는데 자바만 돌아가고 있더라구요...이런..이런.
그래서 설정파일을 같이 올려봅니다. 한번 봐주세요...물론, 인내력 엄청 많은 사람들이나 
하겠지만....저..지금..이틀째..잠 안자고 이러고 있습니다. ^^
  **profile**
 # /etc/profile
 # System wide environment and startup programs
# Functions and aliases go in /etc/bashrc
 if ! echo $PATH | /bin/grep -q "/usr/X11R6/bin" ; then
export PATH="$PATH:/usr/X11R6/bin:/usr/local/java/bin"
fi
 ulimit -S -c 1000000 > /dev/null 2>&1
if [ `id -gn` = `id -un` -a `id -u` -gt 14 ]; then
	umask 002
else
	umask 022
fi
 USER=`id -un`
LOGNAME=$USER
MAIL="/var/spool/mail/$USER"
 HOSTNAME=`/bin/hostname`
HISTSIZE=1000
 if [ -z "$INPUTRC" -a ! -f "$HOME/.inputrc" ]; then
	INPUTRC=/etc/inputrc
fi
 export PATH USER LOGNAME MAIL HOSTNAME HISTSIZE INPUTRC
export JAVA_HOME="/usr/local/java"
export CLASSPATH=".:/usr/local/jsdk/lib/jsdk.jar"
 #/:$JAVA_HOME/lib/tools.jar:/usr/local/jakarta/common/lib/servlet.jar"  //위 줄에 맨 뒤에 "을 삭제하고 붙
여준다.  for i in /etc/profile.d/*.sh ; do
	if [ -x $i ]; then
		. $i
	fi
done
 unset i
   **zone.propertice**
###############################################################################
#                        Servlet Zone Configuration File                      #
###############################################################################
 ################################ W A R N I N G ################################
#
# Unlike normal Java properties, JServ configurations have some important
# extentions:
#
#    1) commas are used as token separators
#    2) multiple definitions of the same key are concatenated in a
#       comma-separated list.
#
###############################################################################
 # List of Repositories
#######################
 # The list of servlet repositories controlled by this servlet zone
# Syntax: repositories=[repository],[repository]...
# Default: NONE
# Note: The classes you want to be reloaded upon modification should be put
#       here.
 #repositories=/home/httpd/servlets
repositories=/home/dymos/public_html/java
 # Classloader parameters
#########################
 # Enable servlet class autoreloading.
# Syntax: autoreload.classes=[true,false] (boolean)
# Default: true
autoreload.classes=true
 # Enable servlet resourced autoreloading (properties and other loaded resources)
# Syntax: autoreload.file=[true,false] (boolean)
# Default: true
autoreload.file=true
 # Set the number of millisecond to wait before giving up on initializing a servlet.
# (a timeout of zero means no timeout)
# Syntax: init.timeout=(long)>0
# Default:10000 (10 secs)
init.timeout=10000
 # Set the number of millisecond to wait before giving up on destroying a servlet.
# (a timeout of zero means no timeout)
# Syntax: destroy.timeout=(long)>0
# Default:10000 (10 secs)
destroy.timeout=10000
 # Session Cookie Parameters
############################
 # Set whether or not to use cookies to maintain session state.
# If false, then response.encodeUrl() will always be the method
# to maintain session state. If true, then the servlet engine will
# attempt to set a cookie when request.getSession(true) is called.
# Syntax: session.useCookies=[true,false] (boolean)
# Default: true
session.useCookies=true
 # Set the number of millisecond to wait before invalidating an unused session.
# Syntax: session.timeout=(long)>0
# Default:1800000 (30 mins)
session.timeout=1800000
 # Set how frequently (milliseconds) to check for timed-out sessions.
# Syntax: session.checkFrequency=(long)>0
# Default: 30000 (30 secs)
session.checkFrequency=30000
 # Set the domain= header that gets sent with the cookie. This is
# entirely optional
# Default: null
#session.topleveldomain=.foo.com
 # SingleThreadModel Servlets parameters
########################################
 # Set the initial capacity of the STM servlets pool.
# Syntax: singleThreadModelServlet.initialCapacity=(int)>1
# Default: 5
singleThreadModelServlet.initialCapacity=5
 # Set the number of servlet instances should be added to the pool if found empty.
# Syntax: singleThreadModelServlet.incrementCapacity=(int)>1
# Default: 5
singleThreadModelServlet.incrementCapacity=5
 # Set the maximum capacity of the STM pool
# Syntax: singleThreadModelServlet.maximumCapacity=(int)>1
# Default:10
singleThreadModelServlet.maximumCapacity=10
 ################### S E R V L E T    P A R A M E T E R S ######################
 ################################## N O T E ####################################
# When "classname" is specified, it means a Java dot-formatter full class name
# without the ".class". For example, a class with source file named
# "Dummy.java" with a package name "org.fool" is defined as "org.fool.Dummy".
#
# Since each servlet may have lots of private initialization data, Apache JServ
# allows you to store those servlet initArgs in a separate file. To do this,
# simply do not set any initArgs in this file: Apache JServ will then look for
# a file named "[servlet classname].initargs" in the same directory of that
# class. Note that this may work with even class archives.
###############################################################################
 # Startup Servlets
###################
 # Comma or space delimited list of servlets to launch on startup.
# This can either be a class name or alias.
# Syntax: servlets.startup=[classname or alias],[classname or alias],...
# Default: NONE
# servlets.startup=hello,snoop,org.fool.Dummy
 # Servlet Aliases
##################
 # This defines aliases from which servlets can be invoked.
# Each alias give a new instance of the servlet. This means that if a servlet
# is invoked both by class name and by alias name, it will result in _TWO_
# instances of the servlet being created.
# Syntax: servlet.[alias].code=[classname] (String)
# Default: NONE
# servlet.snoop.code=SnoopServlet
# servlet.hello.code=org.fool.Dummy
 # Global Init Parameters
#########################
 # Parameters passed here are given to each of servlets. You should put
# configuration information that is common to all servlets.
#
# The value of the property is a comma delimited list of "name=value" pairs
# that are accessible to the servlet via the method getInitParameter()
# in ServletConfig.
# Syntax: servlets.default.initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlets.default.initArgs=common.to.everybody=Hi everybody!
 # Servlet Init Parameters
##########################
 # These properties define init parameters for each servlet that is invoked
# by its classname.
# Syntax: servlet.[classname].initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlet.org.fool.Dummy.initArgs=message=I'm a dummy servlet
 # Aliased Servlet Init Parameters
##################################
 # These properties define init parameters for each servlet that is invoked
# by its alias.
# Syntax: servlet.[alias].initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlet.snoop.initArgs=message=I'm a snoop servlet
# servlet.hello.initArgs=message=I say hello world to everyone
       jserv.propertice
 ###############################################################################
#                        Apache JServ Configuration File                      #
###############################################################################
 ################################ W A R N I N G ################################
# Unlike normal Java properties, JServ configurations have some important
# extentions:
#
#    1) commas are used as token separators
#    2) multiple definitions of the same key are concatenated in a
#       comma-separated list.
###############################################################################
 #
# Execution parameters
#######################
 # The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in your path.
wrapper.bin=/usr/local/java/bin/java
wrapper.classpath=/usr/local/java/lib
wrapper.classpath=/usr/lib/apache/ApacheJServ.jar
 # Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
 # Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default:"org.apache.jserv.JServ"
 # Arguments passed to main class after the properties filename (not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
 # PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default:"/bin:/usr/bin:/usr/local/bin" for Unix systems
#          "c:(windows-dir);c:(windows-system-dir)" for Win32 systems
# Notes: if more than one line is supplied these will be concatenated using
#        ":" or ";" (depending wether Unix or Win32) characters
#        Under Win32 (windows-dir) and (windows-system-dir) will be
#        automatically evaluated to match your system requirements
 # CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be concatenated using
#       ":" or ";" (depending wether Unix or Win32) characters. JVM must be
#       able to find JSDK and JServ classes and any utility classes used by
#       your servlets.
# Note: the classes you want to be automatically reloaded upon modification
#       MUST NOT be in this classpath or the classpath of the shell
#       you start the Apache from.
#
wrapper.classpath=/usr/lib/apache/ApacheJServ.jar
#wrapper.classpath=/home/httpd/classes/servlet-2.0.jar
wrapper.classpath=/usr/local/jsdk/lib/jsdk.jar
 # An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
#          SystemDrive and SystemRoot with appropriate values on Win32 systems
 # An environment name with value copied from caller to Java Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
 # Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=[true|false] (boolean)
# Default: false
 # Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
 #
# General parameters
######################
 # Set the default IP address or hostname Apache JServ binds (or listens) to.
#
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is so
# that one can have multiple instances of Apache JServ listening on
# the same port number, but different IP addresses on the same machine.
# Use bindaddress=* only if you know exactly what you are doing here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache, and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal network address
# (protected by a firewall) if JServ is running on another machine than Apache.
# Ask your network admin.
# "*" _may_ be used on boxes where some of the clients get connected using
# "localhost"and others using another IP addr.
#
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
 # Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
 #
# Servlet Zones parameters
###########################
 # List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list of String)
# Default: NONE
zones=root
 # Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=[full path to configFile] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
root.properties=/etc/httpd/conf/jserv/zone.properties
 #
# Thread Pool parameters
#########################
 # Enables or disables the use of the thread pool.
# Syntax: pool=[true|false] (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may generate deadlocks.
# For this reason, we advise against using this code in production environments.
pool=false
 # Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default:10
# NOTE: depending on your system load, this number should be low for contantly
# loaded servers and should be increased depending on load bursts.
pool.capacity=10
 # Indicates the pool controller that should be used to control the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special recycle behavior
# is needed. Look at the "org.apache.java.recycle" package javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
 #
# Security parameters
#####################
 # Enable/disable the execution of org.apache.jserv.JServ as a servlet.
# This is disabled by default because it may give informations that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is filtered by the web
# server modules by default so that both sides should be enabled to let this
# service work.
# This service is useful for installation and configuration since it gives
# feedback about the exact configurations Apache JServ is using, but it should
# be disabled when both installation and configuration processes are done.
# Syntax: security.selfservlet=[true|false] (boolean)
# Default: false
# WARNING: disable this in a production environment since may give reserved
# information to untrusted users.
security.selfservlet=true
 # Set the maximum number of socket connections Apache JServ may handle
# simultaneously. Make sure your operating environment has enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
 # Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented out.
# security.backlog=5
 # List of IP addresses allowed to connect to Apache JServ. This is a first
# security filtering to reject possibly unsecure connections and avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you are doing :
#    security.allowedAddresses=DISABLED
#   allows connections on JServ'port from entire internet.)
#   You do need only to allow YOUR  Apache to talk to JServ.
# </warning>
#
# Default:127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comma separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
 # Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we believe that
# connection restriction from all IP addresses but localhost reduces your
# time to get Apache JServ to run. If you allow other addresses to connect and
# you don't trust it, you should enable authentication to prevent untrusted
# execution of your servlets. Beware: if authentication is disabled and the
# IP address is allowed, everyone on that machine can execute your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=true
 # Authentication secret key.
# The secret key is passed as a file that must be kept secure and must
# be exactly the same of those used by clients to authenticate themselves.
# Syntax: security.secretKey=[secret key path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
security.secretKey=/etc/httpd/conf/jserv/jserv.secret.key
 # Length of the randomly generated challenge string (in bytes) used to
# authenticate connections. 5 is the lowest possible choice to force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
 #
# Logging parameters
####################
 # Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of performance. You
# should reduced the generated log to a minumum or even disable it if fast
# execution is an issue.  Note that if all log channels (see below) are
# enabled, the log may become really big since each servlet request may
# generate many Kb of log. Some log channels are mainly for debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
 # Set the name of the trace/log file.  To avoid possible confusion about
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of Apache
# JServ.
#
# On Unix, this file must have write permissions by the owner of the JVM
# process. In other words, if you are running Apache JServ in manual mode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
log.file=/var/log/httpd/jserv.log
 # Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
 # Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
 
# Since all the messages logged are processed by a thread running with
# minimum priority, it's of vital importance that this thread gets a chance
# to run once in a while. If it doesn't, the log queue overflow occurs,
# usually resulting in the OutOfMemoryError.
#
# To prevent this from happening, two parameters are used: log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for the logged
# message to stay in the queue, the latter defines maximum number of
# messages in the queue.
#
# If one of those conditions becomes true (age > maxage || size > maxsize),
# the log message stating that fact is generated and the log queue is
# flushed in the separate thread.
#
# If you ever see such a message, either your system doesn't live up to its
# expectations or you have a runaway loop (probably, but not necessarily,
# generating a lot of log messages).
#
# WARNING: Default values are lousy, you probably want to tweak them and
# report the results back to the development team.
 # Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
 # Syntax: log.queue.maxsize = [integer]
# Default:1000
log.queue.maxsize = 1000
 # Enable/disable logging the channel name
# Default: false
# log.channel=false
 # Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
 # Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
 # Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
 # JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
 # Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
 # Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
 # Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
 # Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
      **jserv.con**
  ###############################################################################
#                     Apache JServ Configuration File                         #
###############################################################################
 # Note: this file should be appended or included into your httpd.conf
 # Tell Apache on win32 to load the Apache JServ communication module
#LoadModule jserv_module modules/ApacheModuleJServ.dll
 # Tell Apache on Unix to load the Apache JServ communication module
# For shared object builds only!!!
#LoadModule jserv_module /usr/lib/apache/mod_jserv.so
 <IfModule mod_jserv.c>
 # Whether Apache must start Apache JServ or not (On=Manual Off=Autostart)
# Syntax: ApJServManual [on/off]
# Default:"Off"
ApJServManual off
 # Properties filename for Apache JServ in Automatic Mode.
# In manual mode this directive is ignored
# Syntax: ApJServProperties [filename]
# Default:"./conf/jserv.properties"
ApJServProperties /etc/httpd/conf/jserv/jserv.properties
 # Log file for this module operation relative to Apache root directory.
# Set the name of the trace/log file.  To avoid possible confusion about
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.properties file. This is the log file for the C portion of Apache
# JServ.
#
# On Unix, this file must have write permissions by the owner of the JVM
# process. In other words, if you are running Apache JServ in manual mode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: ApJServLogFile [filename]
# Default:"./logs/mod_jserv.log"
# Note: when set to "DISABLED", the log will be redirected to Apache error log
ApJServLogFile /var/log/httpd/mod_jserv.log
 # Log Level for this module
# Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|emerg]
# Default: info    (unless compiled w/ JSERV_DEBUG, in which case it's debug)
ApJServLogLevel notice
 # Protocol used by this host to connect to Apache JServ
# (see documentation for more details on available protocols)
# Syntax: ApJServDefaultProtocol [name]
# Default:"ajpv12"
ApJServDefaultProtocol ajpv12
 # Default host on which Apache JServ is running
# Syntax: ApJServDefaultHost [hostname]
# Default:"localhost"
#ApJServDefaultHost java.apache.org
 # Default port that Apache JServ is listening to
# Syntax: ApJServDefaultPort [number]
# Default: protocol-dependant (for ajpv12 protocol this is "8007")
ApJServDefaultPort 8007
 # The amount of time to give to the JVM to start up as well
# as the amount of time to wait to ping the JVM to see if it
# is alive. Slow or heavily loaded machines might want to
# increase this value.
# Default:10 seconds
# ApJServVMTimeout 10
 # Passes parameter and value to specified protocol.
# Syntax: ApJServProtocolParameter [name] [parameter] [value]
# Default: NONE
# Note: Currently no protocols handle this. Introduced for future protocols.
 # Apache JServ secret key file relative to Apache root directory.
# Syntax: ApJServSecretKey [filename]
# Default:"./conf/jserv.secret.key"
# Warning: if authentication is DISABLED, everyone on this machine (not just
# this module) may connect to your servlet engine and execute servlet
# bypassing web server restrictions. See the documentation for more information
ApJServSecretKey /etc/httpd/conf/jserv/jserv.secret.key
#ApJServSecretKey DISABLED
 # Mount point for Servlet zones
# (see documentation for more information on servlet zones)
# Syntax: ApJServMount [name] [jserv-url]
# Default: NONE
# Note: [name] is the name of the Apache URI path to mount jserv-url on
#       [jserv-url] is something like "protocol://host:port/zone"
#  If protocol, host or port are not specified, the values from
#  "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPort"
#  will be used.
#  If zone is not specified, the zone name will be the first subdirectory of
#  the called servlet.
# Example:"ApJServMount /servlets /myServlets"
#  if user requests "http://host/servlets/TestServlet"
#  the servlet "TestServlet" in zone "myServlets" on default host
#  thru default protocol on defaul port will be requested
# Example:"ApJServMount /servlets ajpv12://localhost:8007"
#  if user requests "http://host/servlets/myServlets/TestServlet"
#  the servlet "TestServlet" in zone "myServlets" will be requested
# Example:"ApJServMount /servlets ajpv12://jserv.mydomain.com:15643/myServlets"
#  if user requests "http://host/servlets/TestServlet" the servlet
#  "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" using
#  "ajpv12" protocol on port "15643" will be executed
ApJServMount /servlets /root
ApJServMount /servlet /root
 # Whether <VirtualHost> inherits base host mount points or not
# Syntax: ApJServMountCopy [on/off]
# Default:"On"
# Note: This directive is meaninful only when virtual hosts are being used
ApJServMountCopy on
 # Executes a servlet passing filename with proper extension in PATH_TRANSLATED
# property of servlet request.
# Syntax: ApJServAction [extension] [servlet-uri]
# Defaults: NONE
# Notes: This is used for external tools.
#ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
#ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet
#ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI
#ApJServAction .xml /servlets/org.apache.cocoon.Cocoon
 # Enable the Apache JServ status handler with the URL of
# "http://servername/jserv/" (note the trailing slash!)
# Change the "deny" directive to restrict access to this status page.
<Location /jserv/>
  SetHandler jserv-status
 
  order deny,allow
  deny from all
  allow from 127.0.0.1
</Location>
 ############################## W A R N I N G ##################################
# Remember to disable or otherwise protect the execution of the Apache JServ  #
# Status Handler (see right above) on a production environment since this may #
# give untrusted users the ability to obtain restricted information on your   #
# servlets and their initialization arguments such as JDBC passwords and      #
# other important information. The Apache JServ Status Handler should be      #
# accessible only by system administrators.                                   #
###############################################################################
 </IfModule>
   **http.con**
 ##
## httpd.conf -- Apache HTTP server configuration file
##
 #
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# After this file is processed, the server will look for and process
# /usr/conf/srm.conf and then /usr/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
 ### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
 #
# ServerType is either inetd, or standalone.  Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone
 #
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
 #
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/httpd.lock
 #
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid
 #
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this.  But if yours does (you'll know because
# this file will be  created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard
 #
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order.  The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity.  The commented-out values
# below are the built-in defaults.  You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
 #
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
 #
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
 #
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
 #
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
 #
# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 20
 #
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 8
 #
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
 #
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
#       request per connection. For example, if a child process handles
#       an initial request and 10 subsequent "keptalive" requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 100
 #
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
Listen 80
 #
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
 #
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order is which modules are loaded is important.  Don't change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
 #LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule jserv_module	modules/mod_jserv.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module         modules/mod_env.so
LoadModule config_log_module  modules/mod_log_config.so
LoadModule agent_log_module   modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module  modules/mod_mime_magic.so
LoadModule mime_module        modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module      modules/mod_status.so
LoadModule info_module        modules/mod_info.so
LoadModule includes_module    modules/mod_include.so
LoadModule autoindex_module   modules/mod_autoindex.so
LoadModule dir_module         modules/mod_dir.so
LoadModule cgi_module         modules/mod_cgi.so
LoadModule asis_module        modules/mod_asis.so
LoadModule imap_module        modules/mod_imap.so
LoadModule action_module      modules/mod_actions.so
#LoadModule speling_module     modules/mod_speling.so
LoadModule userdir_module     modules/mod_userdir.so
LoadModule alias_module       modules/mod_alias.so
LoadModule rewrite_module     modules/mod_rewrite.so
LoadModule access_module      modules/mod_access.so
LoadModule auth_module        modules/mod_auth.so
LoadModule anon_auth_module   modules/mod_auth_anon.so
LoadModule db_auth_module     modules/mod_auth_db.so
#LoadModule dbm_auth_module    modules/mod_auth_dbm.so
#LoadModule auth_ldap_module   modules/mod_auth_ldap.so
#LoadModule digest_module      modules/mod_digest.so
#LoadModule proxy_module       modules/libproxy.so
#LoadModule cern_meta_module   modules/mod_cern_meta.so
LoadModule expires_module     modules/mod_expires.so
LoadModule headers_module     modules/mod_headers.so
#LoadModule usertrack_module   modules/mod_usertrack.so
#LoadModule example_module     modules/mod_example.so
#LoadModule unique_id_module   modules/mod_unique_id.so
LoadModule setenvif_module    modules/mod_setenvif.so
#LoadModule bandwidth_module   modules/mod_bandwidth.so
#LoadModule put_module	       modules/mod_put.so
#LoadModule throttle_module    modules/mod_throttle.so
#LoadModule define_module      modules/mod_define.so
#LoadModule webapp_module      modules/mod_webapp.so //DSO지원하기 위한 모듈, 톰캣실패의 원인
<IfDefine HAVE_PERL>
LoadModule perl_module        modules/libperl.so
</IfDefine>
<IfDefine HAVE_PHP>
LoadModule php_module         modules/mod_php.so
</IfDefine>
<IfDefine HAVE_PHP3>
LoadModule php3_module        modules/libphp3.so
</IfDefine>
<IfDefine HAVE_PHP4>
LoadModule php4_module        modules/libphp4.so
</IfDefine>
<IfDefine HAVE_DAV>
LoadModule dav_module         modules/libdav.so
</IfDefine>
<IfDefine HAVE_ROAMING>
LoadModule roaming_module     modules/mod_roaming.so
</IfDefine>
<IfDefine HAVE_SSL>
LoadModule ssl_module         modules/libssl.so
</IfDefine>
 #  Reconstruction of the complete module list from all available modules
#  (static and shared ones) to achieve correct module execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_jserv.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_bandwidth.c
#AddModule mod_put.c
#AddModule mod_webapp.c //톰캣을 실행할때 쓰는 모듈
<IfDefine HAVE_PERL>
AddModule mod_perl.c
</IfDefine>
<IfDefine HAVE_PHP>
AddModule mod_php.c
</IfDefine>
<IfDefine HAVE_PHP3>
AddModule mod_php3.c
</IfDefine>
<IfDefine HAVE_PHP4>
AddModule mod_php4.c
</IfDefine>
<IfDefine HAVE_DAV>
AddModule mod_dav.c
</IfDefine>
<IfDefine HAVE_ROAMING>
AddModule mod_roaming.c
</IfDefine>
<IfDefine HAVE_SSL>
AddModule mod_ssl.c
</IfDefine>
 #
# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
 ### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
 #
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
 #
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80
 #
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group nobody on these systems!
#
User apache
Group apache
 #
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin dymos at dreamwiz.com  #
# ServerName: allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/) # anyway, and this will make redirections work 
in a sensible way. #
#ServerName localhost
 #
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html"
#DocumentRoot "/usr/local/jakarta/webapps/ROOT"
 #
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
 #
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
 #
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/html">
 #
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes Includes FollowSymLinks
 #
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
    AllowOverride None
 #
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>
 #
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid.  This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden #
UserDir public_html
 #
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
<Directory /home/*/public_html>
	AllowOverride FileInfo AuthConfig Limit
	Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec ExecCGI
	<Limit GET POST OPTIONS PROPFIND>
	Order allow,deny
	Allow from all
	</Limit>
	<Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
	Order deny,allow
	Deny from all
	</Limit>
</Directory>
 #
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
DirectoryIndex index.html index.htm index.shtml index.php index.php4 index.php3 index.cgi
 #
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
 #
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^.ht">
    Order allow,deny
    Deny from all
</Files>
 #
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
 #
# UseCanonicalName: (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On
 #
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types
 #
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
 #
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
 #
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
 #
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log
 #
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
 #
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
 #
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog /var/log/httpd/access_log common
CustomLog /var/log/httpd/access_log combined
 #
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent
 #
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined
 #
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On
 #
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/"..
#
Alias /icons/ "/var/www/icons/"
 <Directory "/var/www/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
 #
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
 #
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/html/cgi-bin">
    AllowOverride None
    Options Indexes Includes FollowSymLinks ExecCGI
    Order allow,deny
    Allow from all
</Directory>
 #
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
 #
# Directives controlling the display of server-generated directory listings.
#
 #
# FancyIndexing: whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing NameWidth=*
 #
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
 AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
 AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
 AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
 #
# DefaultIcon: which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
 #
# AddDescription: allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
 #
# ReadmeName: the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName: the name of a file which should be prepended to
# directory indexes.
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README.html
HeaderName HEADER.html
 #
# IndexIgnore: a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
 #
# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
 #
# AddLanguage: allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.  Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po"
# to avoid the ambiguity with the common suffix for perl scripts.
#
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it
 #
# LanguagePriority: allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
#
LanguagePriority en fr de
 #
# AddType: allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
# The following is for PHP4 (conficts with PHP/FI, below):
<IfModule mod_php4.c>
  AddType application/x-httpd-php .php4 .php3 .phtml .php .html
  AddType application/x-httpd-php-source .phps
</IfModule>
 # The following is for PHP3:
<IfModule mod_php3.c>
  AddType application/x-httpd-php3 .php3
  AddType application/x-httpd-php3-source .phps
</IfModule>
 # The following is for PHP/FI (PHP2):
<IfModule mod_php.c>
  AddType application/x-httpd-php .phtml
</IfModule>
 AddType application/x-tar .tgz
 #
# AddHandler: allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi
AddHandler cgi-script .pl
#
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml
 #
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
 #
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map
 #
# To enable type maps, you might want to use
#
#AddHandler type-map var
 #
# Action: lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
 #
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
 #
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta
 #
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html #  N.B.: Many of the environment variables assoc
iated with the original #  request will *not* be available to such a script.
 #
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
 #
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4.0" force-response-1.0
BrowserMatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0
  # If the perl module is installed, this will be enabled.
<IfModule mod_perl.c>
  Alias /perl/ /var/www/perl/
  <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    Options +ExecCGI
  </Location>
</IfModule>
 #
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
# You must unremark these two lines at the top of this file as well:
#LoadModule put_module		modules/mod_put.so
#AddModule mod_put.c
#
#Alias /upload /tmp
#<Location /upload>
#    EnablePut On
#    AuthType Basic
#    AuthName Temporary
#    AuthUserFile /etc/httpd/conf/passwd
#    EnableDelete Off
#    umask 007
#    <Limit PUT>
#	require valid-user
#    </Limit>
#</Location>
 #
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
 #
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Location>
 # Allow access to local system documentation from localhost
Alias /doc/ /usr/share/doc/
<Location /doc>
  order deny,allow
  deny from all
  allow from localhost .localdomain
  Options Indexes FollowSymLinks
</Location>
 #
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi #</Location>
 #
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Directory>
 #
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
 #
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/var/cache/httpd"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
 #</IfModule>
# End of proxy directives.
 ### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
 #
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
 #
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some_domain.com>
#    ServerAdmin webmaster at host.some_domain.com #    DocumentRoot /www/docs/host.some_domain.com
#    ServerName host.some_domain.com
#    ErrorLog logs/host.some_domain.com-error_log
#    CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>
 #<VirtualHost _default_:*>
#</VirtualHost>
 <IfDefine HAVE_SSL>
##
## SSL Virtual Host Context
##
 #  Apache will only listen on port 80 by default.  Defining the virtual server
#  (below) won't make it automatically listen on the virtual server's port.
Listen 443
 #   SSL Session Cache:
#   The cache speeds up processing of multiple parallel requests from
#   the same client.
SSLSessionCache shm:/var/cache/ssl_gcache_data(524288)
 <VirtualHost _default_:443>
 #  General setup for the virtual host
DocumentRoot "/var/www/html"
 #   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on
 #   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
 #   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again. A test
#   certificate can be generated with `make certificate' under
#   built time. Keep in mind that if you've both a RSA and a DSA
#   certificate you can configure both in parallel (to also allow
#   the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
#SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt
 #   Server Private Key:
#   If the key is not c