모 리눅스 사이트 질답란에 올라와 있네요..
한컴 2.2 는 php mysql 연동이 않된다고 하네요..
혹시 그 답 보셨나 모르겠군요
rpm 설치시 어떻게 연동 시키는지 저도 모르니.
apache + php + mysql
소스 컴파일 하시죠..음
: 안녕하세요..
: APM연동이 안되는거 같아서 질문을 하는데요..
: http://내주소/info.php3 란 파일을 보면..
: (mysql함수가 지원되는지 알아보는 파일)
: mysql에 대한 항목이 나와야 하는데..
: 안나오면 어느분께서 APM연동이 안되는거 라고 하시더군요..
: 근데...또 어느분께서 답변해 주시길..
: 그게 안나오면 httpd.conf에서 설정을 잘못해줘서 그런거라고 하셨거든요..
: 그래서 그분이 해놓은신거 보고 대충은 아는대로 고쳐봤는데
: 이상이 있으면 죄송하지만 어느 부분이 이상이 있는지.. 가르쳐 주시기 바랍니다.
: 제로보드를 설치하려고 하는데.. APM연동이 안되서
: install_ok.php화면에서 화면이 하얀화면만 나오네요..
: 제로보드가 답변들을 찾아보니깐 APM연동이 안되서 그런거라고 하셨는데
: 데몬들두 다 정상작동하구요.. 그렇다고 mysql에서 유저등록을 제대로 못해준거도 아닌데
: 암튼..제가 이상하게 설정했으면 가르쳐 주세요..
: 그리고 만약 여기에 이상이 없다면.. 제가 어떻게 해야 하는지
: 죄송하지만 가르쳐 주시기 바랍니다..
: 그럼 좋은하루 되세요!
:
: #
: # Based upon the NCSA server configuration files originally by Rob McCool.
: #
: # This is the main Apache server configuration file. It contains the
: # configuration directives that give the server its instructions.
: # See <URL:http://www.apache.org/docs/> for detailed
: information about
: # the directives.
: #
: # Do NOT simply read the instructions in here without understanding
: # what they do. They're here only as hints or reminders. If you are unsure
: # consult the online docs. You have been warned.
: #
: # After this file is processed, the server will look for and process
: # /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf
: # unless you have overridden these with ResourceConfig and/or
: # AccessConfig directives here.
: #
: # The configuration directives are grouped into three basic sections:
: # 1. Directives that control the operation of the Apache server process as a
: # whole (the 'global environment').
: # 2. Directives that define the parameters of the 'main' or 'default' server,
: # which responds to requests that aren't handled by a virtual host.
: # These directives also provide default values for the settings
: # of all virtual hosts.
: # 3. Settings for virtual hosts, which allow Web requests to be sent to
: # different IP addresses or hostnames and have them handled by the
: # same Apache server process.
: #
: # Configuration and logfile names: If the filenames you specify for many
: # of the server's control files begin with "/" (or "drive:/" for Win32), the
: # server will use that explicit path. If the filenames do *not* begin
: # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
: # with ServerRoot set to "/usr/local/apache" will be interpreted by the
: # server as "/usr/local/apache/logs/foo.log".
: #
:
: ### Section 1: Global Environment
: #
: # The directives in this section affect the overall operation of Apache,
: # such as the number of concurrent requests it can handle or where it
: # can find its configuration files.
: #
:
: #
: # ServerType is either inetd, or standalone. Inetd mode is only supported on
: # Unix platforms.
: #
: ServerType standalone
:
: #
: # ServerRoot: The top of the directory tree under which the server's
: # configuration, error, and log files are kept.
: #
: # NOTE! If you intend to place this on an NFS (or otherwise network)
: # mounted filesystem then please read the LockFile documentation
: # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
: # you will save yourself a lot of trouble.
: #
: # Do NOT add a slash at the end of the directory path.
: #
: ServerRoot "/etc/httpd"
:
: #
: # The LockFile directive sets the path to the lockfile used when Apache
: # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
: # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
: # its default value. The main reason for changing it is if the logs
: # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
: # DISK. The PID of the main server process is automatically appended to
: # the filename.
: #
: #LockFile /var/run/httpd.lock
:
: #
: # PidFile: The file in which the server should record its process
: # identification number when it starts.
: #
: PidFile /var/run/httpd.pid
:
: #
: # ScoreBoardFile: File used to store internal server process information.
: # Not all architectures require this. But if yours does (you'll know because
: # this file will be created when you run Apache) then you *must* ensure that
: # no two invocations of Apache share the same scoreboard file.
: #
: ScoreBoardFile logs/apache_runtime_status
:
: #
: # In the standard configuration, the server will process httpd.conf (this
: # file, specified by the -f command line option), srm.conf, and access.conf
: # in that order. The latter two files are now distributed empty, as it is
: # recommended that all directives be kept in a single file for simplicity.
: # The commented-out values below are the built-in defaults. You can have the
: # server ignore these files altogether by using "/dev/null" (for Unix) or
: # "nul" (for Win32) for the arguments to the directives.
: #
: #ResourceConfig conf/srm.conf
: #AccessConfig conf/access.conf
:
: #
: # Timeout: The number of seconds before receives and sends time out.
: #
: Timeout 300
:
: #
: # KeepAlive: Whether or not to allow persistent connections (more than
: # one request per connection). Set to "Off" to deactivate.
: #
: KeepAlive On
:
: #
: # MaxKeepAliveRequests: The maximum number of requests to allow
: # during a persistent connection. Set to 0 to allow an unlimited amount.
: # We recommend you leave this number high, for maximum performance.
: #
: MaxKeepAliveRequests 100
:
: #
: # KeepAliveTimeout: Number of seconds to wait for the next request from the
: # same client on the same connection.
: #
: KeepAliveTimeout 15
:
: #
: # Server-pool size regulation. Rather than making you guess how many
: # server processes you need, Apache dynamically adapts to the load it
: # sees --- that is, it tries to maintain enough server processes to
: # handle the current load, plus a few spare servers to handle transient
: # load spikes (e.g., multiple simultaneous requests from a single
: # Netscape browser).
: #
: # It does this by periodically checking how many servers are waiting
: # for a request. If there are fewer than MinSpareServers, it creates
: # a new spare. If there are more than MaxSpareServers, some of the
: # spares die off. The default values are probably OK for most sites.
: #
: MinSpareServers 5
: MaxSpareServers 10
:
: #
: # Number of servers to start initially --- should be a reasonable ballpark
: # figure.
: #
: StartServers 5
:
: #
: # Limit on total number of servers running, i.e., limit on the number
: # of clients who can simultaneously connect --- if this limit is ever
: # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
: # It is intended mainly as a brake to keep a runaway server from taking
: # the system with it as it spirals down...
: #
: MaxClients 150
:
: #
: # MaxRequestsPerChild: the number of requests each child process is
: # allowed to process before the child dies. The child will exit so
: # as to avoid problems after prolonged use when Apache (and maybe the
: # libraries it uses) leak memory or other resources. On most systems, this
: # isn't really needed, but a few (such as Solaris) do have notable leaks
: # in the libraries. For these platforms, set to something like 10000
: # or so; a setting of 0 means unlimited.
: #
: # NOTE: This value does not include keepalive requests after the initial
: # request per connection. For example, if a child process handles
: # an initial request and 10 subsequent "keptalive" requests, it
: # would only count as 1 request towards this limit.
: #
: MaxRequestsPerChild 0
:
: #
: # Listen: Allows you to bind Apache to specific IP addresses and/or
: # ports, in addition to the default. See also the <VirtualHost>
: # directive.
: #
: #Listen 3000
: #Listen 12.34.56.78:80
: #Listen 80
:
: #
: # BindAddress: You can support virtual hosts with this option. This directive
: # is used to tell the server which IP address to listen to. It can either
: # contain "*", an IP address, or a fully qualified Internet domain name.
: # See also the <VirtualHost> and Listen directives.
: #
: #BindAddress *
:
: #
: # Dynamic Shared Object (DSO) Support
: #
: # To be able to use the functionality of a module which was built as a DSO you
: # have to place corresponding `LoadModule' lines at this location so the
: # directives contained in it are actually available _before_ they are used.
: # Please read the file http://httpd.apache.org/docs/dso.html for more
: # details about the DSO mechanism and run `httpd -l' for the list of already
: # built-in (statically linked and thus always available) modules in your httpd
: # binary.
: #
: # Note: The order in which modules are loaded is important. Don't change
: # the order below without expert advice.
: #
: # Example:
: # LoadModule foo_module modules/mod_foo.so
:
: #LoadModule mmap_static_module modules/mod_mmap_static.so
: LoadModule vhost_alias_module modules/mod_vhost_alias.so
: <IfDefine HAVE_BANDWIDTH>
: LoadModule bandwidth_module modules/mod_bandwidth.so
: </IfDefine>
: <IfDefine HAVE_THROTTLE>
: LoadModule throttle_module modules/mod_throttle.so
: </IfDefine>
: LoadModule env_module modules/mod_env.so
: LoadModule config_log_module modules/mod_log_config.so
: LoadModule agent_log_module modules/mod_log_agent.so
: LoadModule referer_log_module modules/mod_log_referer.so
: #LoadModule mime_magic_module modules/mod_mime_magic.so
: LoadModule mime_module modules/mod_mime.so
: LoadModule negotiation_module modules/mod_negotiation.so
: LoadModule status_module modules/mod_status.so
: LoadModule info_module modules/mod_info.so
: LoadModule includes_module modules/mod_include.so
: LoadModule autoindex_module modules/mod_autoindex.so
: LoadModule dir_module modules/mod_dir.so
: LoadModule cgi_module modules/mod_cgi.so
: LoadModule asis_module modules/mod_asis.so
: LoadModule imap_module modules/mod_imap.so
: LoadModule action_module modules/mod_actions.so
: #LoadModule speling_module modules/mod_speling.so
: LoadModule userdir_module modules/mod_userdir.so
: LoadModule alias_module modules/mod_alias.so
: LoadModule rewrite_module modules/mod_rewrite.so
: LoadModule access_module modules/mod_access.so
: LoadModule auth_module modules/mod_auth.so
: LoadModule anon_auth_module modules/mod_auth_anon.so
: LoadModule db_auth_module modules/mod_auth_db.so
: #LoadModule auth_any_module modules/mod_auth_any.so
: #LoadModule dbm_auth_module modules/mod_auth_dbm.so
: #LoadModule auth_ldap_module modules/mod_auth_ldap.so
: #LoadModule mysql_auth_module modules/mod_auth_mysql.so
: #LoadModule auth_pgsql_module modules/mod_auth_pgsql.so
: #LoadModule digest_module modules/mod_digest.so
: #LoadModule proxy_module modules/libproxy.so
: #LoadModule cern_meta_module modules/mod_cern_meta.so
: LoadModule expires_module modules/mod_expires.so
: LoadModule headers_module modules/mod_headers.so
: #LoadModule usertrack_module modules/mod_usertrack.so
: #LoadModule example_module modules/mod_example.so
: #LoadModule unique_id_module modules/mod_unique_id.so
: LoadModule setenvif_module modules/mod_setenvif.so
: <IfDefine HAVE_PERL>
: LoadModule perl_module modules/libperl.so
: </IfDefine>
: <IfDefine HAVE_PHP>
: LoadModule php_module modules/mod_php.so
: </IfDefine>
: <IfDefine HAVE_PHP3>
: LoadModule php3_module modules/libphp3.so
: </IfDefine>
: <IfDefine HAVE_PHP4>
: LoadModule php4_module modules/libphp4.so
: </IfDefine>
: <IfDefine HAVE_DAV>
: LoadModule dav_module modules/libdav.so
: </IfDefine>
: <IfDefine HAVE_ROAMING>
: LoadModule roaming_module modules/mod_roaming.so
: </IfDefine>
: <IfDefine HAVE_SSL>
: LoadModule ssl_module modules/libssl.so
: </IfDefine>
: <IfDefine HAVE_PUT>
: LoadModule put_module modules/mod_put.so
: </IfDefine>
: <IfDefine HAVE_PYTHON>
: LoadModule python_module modules/mod_python.so
: </IfDefine>
:
: # Reconstruction of the complete module list from all available modules
: # (static and shared ones) to achieve correct module execution order.
: # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE
: THIS, TOO]
: ClearModuleList
: #AddModule mod_mmap_static.c
: AddModule mod_vhost_alias.c
: <IfDefine HAVE_BANDWIDTH>
: AddModule mod_bandwidth.c
: </IfDefine>
: <IfDefine HAVE_THROTTLE>
: AddModule mod_throttle.c
: </IfDefine>
: AddModule mod_env.c
: AddModule mod_log_config.c
: AddModule mod_log_agent.c
: AddModule mod_log_referer.c
: #AddModule mod_mime_magic.c
: AddModule mod_mime.c
: AddModule mod_negotiation.c
: AddModule mod_status.c
: AddModule mod_info.c
: AddModule mod_include.c
: AddModule mod_autoindex.c
: AddModule mod_dir.c
: AddModule mod_cgi.c
: AddModule mod_asis.c
: AddModule mod_imap.c
: AddModule mod_actions.c
: #AddModule mod_speling.c
: AddModule mod_userdir.c
: AddModule mod_alias.c
: AddModule mod_rewrite.c
: AddModule mod_access.c
: AddModule mod_auth.c
: AddModule mod_auth_anon.c
: AddModule mod_auth_db.c
: #AddModule mod_auth_any.c
: #AddModule mod_auth_dbm.c
: #AddModule auth_ldap.c
: #AddModule mod_auth_mysql.c
: #AddModule mod_auth_pgsql.c
: #AddModule mod_digest.c
: #AddModule mod_proxy.c
: #AddModule mod_cern_meta.c
: AddModule mod_expires.c
: AddModule mod_headers.c
: #AddModule mod_usertrack.c
: #AddModule mod_example.c
: #AddModule mod_unique_id.c
: AddModule mod_so.c
: AddModule mod_setenvif.c
: <IfDefine HAVE_PERL>
: AddModule mod_perl.c
: </IfDefine>
: <IfDefine HAVE_PHP>
: AddModule mod_php.c
: </IfDefine>
: <IfDefine HAVE_PHP3>
: AddModule mod_php3.c
: </IfDefine>
: <IfDefine HAVE_PHP4>
: AddModule mod_php4.c
: </IfDefine>
: <IfDefine HAVE_DAV>
: AddModule mod_dav.c
: </IfDefine>
: <IfDefine HAVE_ROAMING>
: AddModule mod_roaming.c
: </IfDefine>
: <IfDefine HAVE_SSL>
: AddModule mod_ssl.c
: </IfDefine>
: <IfDefine HAVE_PUT>
: AddModule mod_put.c
: </IfDefine>
: <IfDefine HAVE_PYTHON>
: AddModule mod_python.c
: </IfDefine>
:
: #
: # ExtendedStatus controls whether Apache will generate "full" status
: # information (ExtendedStatus On) or just basic information (ExtendedStatus
: # Off) when the "server-status" handler is called. The default is Off.
: #
: #ExtendedStatus On
:
: ### Section 2: 'Main' server configuration
: #
: # The directives in this section set up the values used by the 'main'
: # server, which responds to any requests that aren't handled by a
: # <VirtualHost> definition. These values also provide defaults for
: # any <VirtualHost> containers you may define later in the file.
: #
: # All of these directives may appear inside <VirtualHost> containers,
: # in which case these default settings will be overridden for the
: # virtual host being defined.
: #
:
: #
: # If your ServerType directive (set earlier in the 'Global Environment'
: # section) is set to "inetd", the next few directives don't have any
: # effect since their settings are defined by the inetd configuration.
: # Skip ahead to the ServerAdmin directive.
: #
:
: #
: # Port: The port to which the standalone server listens. For
: # ports < 1023, you will need httpd to be run as root initially.
: #
: Port 8880
:
: ##
: ## SSL Support
: ##
: ## When we also provide SSL we have to listen to the
: ## standard HTTP port (see above) and to the HTTPS port
: ##
: <IfDefine HAVE_SSL>
: Listen 8880
: </IfDefine>
:
: #
: # If you wish httpd to run as a different user or group, you must run
: # httpd as root initially and it will switch.
: #
: # User/Group: The name (or #number) of the user/group to run httpd as.
: # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
: # . On HPUX you may not be able to use shared memory as nobody, and the
: # suggested workaround is to create a user www and use that user.
: # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
: # when the value of (unsigned)Group is above 60000;
: # don't use Group "#-1" on these systems!
: #
: User nobody
: Group nobody
:
: #
: # ServerAdmin: Your address, where problems with the server should be
: # e-mailed. This address appears on some server-generated pages, such
: # as error documents.
: #
: ServerAdmin root at localhoast.localdomain
:
: #
: # ServerName allows you to set a host name which is sent back to clients for
: # your server if it's different than the one the program would get (i.e., use
: # "www" instead of the host's real name).
: #
: # Note: You cannot just invent host names and hope they work. The name you
: # define here must be a valid DNS name for your host. If you don't understand
: # this, ask your network administrator.
: # If your host doesn't have a registered DNS name, enter its IP address here.
: # You will have to access it by its address (e.g., http://123.45.67.89/) : # anyway, and this will make redirections w
: ork in a sensible way. #
: # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
: # machine always knows itself by this address. If you use Apache strictly for
: # local testing and development, you may use 127.0.0.1 as the server name.
: #
: #ServerName localhost
: ServerName nudi.d2g.com
: #
: # DocumentRoot: The directory out of which you will serve your
: # documents. By default, all requests are taken from this directory, but
: # symbolic links and aliases may be used to point to other locations.
: #
: DocumentRoot "/var/www/html"
:
: #
: # Each directory to which Apache has access, can be configured with respect
: # to which services and features are allowed and/or disabled in that
: # directory (and its subdirectories).
: #
: # First, we configure the "default" to be a very restrictive set of
: # permissions.
: #
: <Directory />
: Options FollowSymLinks
: AllowOverride None
: </Directory>
:
: #
: # Note that from this point forward you must specifically allow
: # particular features to be enabled - so if something's not working as
: # you might expect, make sure that you have specifically enabled it
: # below.
: #
:
: #
: # This should be changed to whatever you set DocumentRoot to.
: #
: <Directory "/var/www/html">
:
: #
: # This may also be "None", "All", or any combination of "Indexes",
: # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
: #
: # Note that "MultiViews" must be named *explicitly* --- "Options All"
: # doesn't give it to you.
: #
: Options Indexes FollowSymLinks MultiViews
:
: #
: # This controls which options the .htaccess files in directories can
: # override. Can also be "All", or any combination of "Options", "FileInfo",
: # "AuthConfig", and "Limit"
: #
: AllowOverride None
:
: #
: # Controls who can get stuff from this server.
: #
: Order allow,deny
: Allow from all
: </Directory>
:
: #
: # UserDir: The name of the directory which is appended onto a user's home
: # directory if a ~user request is received.
: #
: # The path to the end user account 'public_html' directory must be
: # accessible to the webserver userid. This usually means that ~userid
: # must have permissions of 711, ~userid/public_html must have permissions
: # of 755, and documents contained therein must be world-readable.
: # Otherwise, the client will only receive a "403 Forbidden" message.
: #
: # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden : #
: <IfModule mod_userdir.c>
: UserDir public_html
: </IfModule>
:
: #
: # Control access to UserDir directories. The following is an example
: # for a site where these directories are restricted to read-only.
: #
: <Directory /home/*/public_html>
: AllowOverride FileInfo AuthConfig Limit
: Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
: <Limit GET POST OPTIONS PROPFIND>
: Order allow,deny
: Allow from all
: </Limit>
: <LimitExcept GET POST OPTIONS PROPFIND>
: Order deny,allow
: Deny from all
: </LimitExcept>
: </Directory>
:
: #
: # DirectoryIndex: Name of the file or files to use as a pre-written HTML
: # directory index. Separate multiple entries with spaces.
: #
: <IfModule mod_dir.c>
: DirectoryIndex index.html index.htm index.shtml index.php index.php4
: index.php3 index.phtml index.cgi
: </IfModule>
:
: #
: # AccessFileName: The name of the file to look for in each directory
: # for access control information.
: #
: AccessFileName .htaccess
:
: #
: # The following lines prevent .htaccess files from being viewed by
: # Web clients. Since .htaccess files often contain authorization
: # information, access is disallowed for security reasons. Comment
: # these lines out if you want Web visitors to see the contents of
: # .htaccess files. If you change the AccessFileName directive above,
: # be sure to make the corresponding changes here.
: #
: # Also, folks tend to use names such as .htpasswd for password
: # files, so this will protect those as well.
: #
: <Files ~ "^.ht">
: Order allow,deny
: Deny from all
: </Files>
:
: #
: # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
: # document that was negotiated on the basis of content. This asks proxy
: # servers not to cache the document. Uncommenting the following line disables
: # this behavior, and proxies will be allowed to cache the documents.
: #
: #CacheNegotiatedDocs
:
: #
: # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
: # Apache needs to construct a self-referencing URL (a URL that refers back
: # to the server the response is coming from) it will use ServerName and
: # Port to form a "canonical" name. With this setting off, Apache will
: # use the hostname:port that the client supplied, when possible. This
: # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
: #
: UseCanonicalName On
:
: #
: # TypesConfig describes where the mime.types file (or equivalent) is
: # to be found.
: #
: <IfModule mod_mime.c>
: TypesConfig /etc/mime.types
: </IfModule>
:
: #
: # DefaultType is the default MIME type the server will use for a document
: # if it cannot otherwise determine one, such as from filename extensions.
: # If your server contains mostly text or HTML documents, "text/plain" is
: # a good value. If most of your content is binary, such as applications
: # or images, you may want to use "application/octet-stream" instead to
: # keep browsers from trying to display binary files as though they are
: # text.
: #
: DefaultType text/plain
:
: #
: # The mod_mime_magic module allows the server to use various hints from the
: # contents of the file itself to determine its type. The MIMEMagicFile
: # directive tells the module where the hint definitions are located.
: # mod_mime_magic is not part of the default server (you have to add
: # it yourself with a LoadModule [see the DSO paragraph in the 'Global
: # Environment' section], or recompile the server and include mod_mime_magic
: # as part of the configuration), so it's enclosed in an <IfModule> container.
: # This means that the MIMEMagicFile directive will only be processed if the
: # module is part of the server.
: #
: <IfModule mod_mime_magic.c>
: # MIMEMagicFile /usr/share/magic.mime
: MIMEMagicFile conf/magic
: </IfModule>
:
: #
: # HostnameLookups: Log the names of clients or just their IP addresses
: # e.g., www.apache.org (on) or 204.62.129.132 (off).
: # The default is off because it'd be overall better for the net if people
: # had to knowingly turn this feature on, since enabling it means that
: # each client request will result in AT LEAST one lookup request to the
: # nameserver.
: #
: HostnameLookups Off
:
: #
: # ErrorLog: The location of the error log file.
: # If you do not specify an ErrorLog directive within a <VirtualHost>
: # container, error messages relating to that virtual host will be
: # logged here. If you *do* define an error logfile for a <VirtualHost>
: # container, that host's errors will be logged there and not here.
: #
: ErrorLog logs/error_log
:
: #
: # LogLevel: Control the number of messages logged to the error_log.
: # Possible values include: debug, info, notice, warn, error, crit,
: # alert, emerg.
: #
: LogLevel warn
:
: #
: # The following directives define some format nicknames for use with
: # a CustomLog directive (see below).
: #
: LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i""
: combined
: LogFormat "%h %l %u %t "%r" %>s %b" common
: LogFormat "%{Referer}i -> %U" referer
: LogFormat "%{User-agent}i" agent
:
: #
: # The location and format of the access logfile (Common Logfile Format).
: # If you do not define any access logfiles within a <VirtualHost>
: # container, they will be logged here. Contrariwise, if you *do*
: # define per-<VirtualHost> access logfiles, transactions will be
: # logged therein and *not* in this file.
: #
: # CustomLog /var/log/httpd/access_log common
: CustomLog logs/access_log combined
:
: #
: # If you would like to have agent and referer logfiles, uncomment the
: # following directives.
: #
: #CustomLog logs/referer_log referer
: #CustomLog logs/agent_log agent
:
: #
: # If you prefer a single logfile with access, agent, and referer information
: # (Combined Logfile Format) you can use the following directive.
: #
: #CustomLog logs/access_log combined
:
: #
: # Optionally add a line containing the server version and virtual host
: # name to server-generated pages (error documents, FTP directory listings,
: # mod_status and mod_info output etc., but not CGI generated documents).
: # Set to "EMail" to also include a mailto: link to the ServerAdmin.
: # Set to one of: On | Off | EMail
: #
: ServerSignature On
:
: # EBCDIC configuration:
: # (only for mainframes using the EBCDIC codeset, currently one of:
: # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
: # The following default configuration assumes that "text files"
: # are stored in EBCDIC (so that you can operate on them using the
: # normal POSIX tools like grep and sort) while "binary files" are
: # stored with identical octets as on an ASCII machine.
: #
: # The directives are evaluated in configuration file order, with
: # the EBCDICConvert directives applied before EBCDICConvertByType.
: #
: # If you want to have ASCII HTML documents and EBCDIC HTML documents
: # at the same time, you can use the file extension to force
: # conversion off for the ASCII documents:
: # > AddType text/html .ahtml
: # > EBCDICConvert Off=InOut .ahtml
: #
: # EBCDICConvertByType On=InOut text/* message/* multipart/*
: # EBCDICConvertByType On=In application/x-www-form-urlencoded
: # EBCDICConvertByType On=InOut application/postscript model/vrml
: # EBCDICConvertByType Off=InOut */*
:
:
: #
: # Aliases: Add here as many aliases as you need (with no limit). The format is
: # Alias fakename realname
: #
: <IfModule mod_alias.c>
:
: #
: # Note that if you include a trailing / on fakename then the server will
: # require it to be present in the URL. So "/icons" isn't aliased in this
: # example, only "/icons/". If the fakename is slash-terminated, then the
: # realname must also be slash terminated, and if the fakename omits the
: # trailing slash, the realname must also omit it.
: #
: Alias /icons/ "/var/www/icons/"
:
: <Directory "/var/www/icons">
: Options Indexes MultiViews
: AllowOverride None
: Order allow,deny
: Allow from all
: </Directory>
:
: # This Alias will project the on-line documentation tree under /manual/
: # even if you change the DocumentRoot. Comment it if you don't want to
: # provide access to the on-line documentation.
: #
: # Alias /manual/ "/etc/httpd/htdocs/manual/"
: #
: # <Directory "/etc/httpd/htdocs/manual">
: # Options Indexes FollowSymlinks MultiViews
: # AllowOverride None
: # Order allow,deny
: # Allow from all
: # </Directory>
:
: #
: # ScriptAlias: This controls which directories contain server scripts.
: # ScriptAliases are essentially the same as Aliases, except that
: # documents in the realname directory are treated as applications and
: # run by the server when requested rather than as documents sent to the client.
: # The same rules about trailing "/" apply to ScriptAlias directives as to
: # Alias.
: #
: ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
:
: #
: # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
: # CGI directory exists, if you have that configured.
: #
: <Directory "/var/www/cgi-bin">
: AllowOverride None
: Options None
: Order allow,deny
: Allow from all
: </Directory>
:
: </IfModule>
: # End of aliases.
:
: #
: # Redirect allows you to tell clients about documents which used to exist in
: # your server's namespace, but do not anymore. This allows you to tell the
: # clients where to look for the relocated document.
: # Format: Redirect old-URI new-URL
: #
:
: #
: # Directives controlling the display of server-generated directory listings.
: #
: <IfModule mod_autoindex.c>
:
: #
: # FancyIndexing is whether you want fancy directory indexing or standard
: #
: IndexOptions FancyIndexing NameWidth=*
:
: #
: # AddIcon* directives tell the server which icon to show for different
: # files or filename extensions. These are only displayed for
: # FancyIndexed directories.
: #
: AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
:
: AddIconByType (TXT,/icons/text.gif) text/*
: AddIconByType (IMG,/icons/image2.gif) image/*
: AddIconByType (SND,/icons/sound2.gif) audio/*
: AddIconByType (VID,/icons/movie.gif) video/*
:
: AddIcon /icons/binary.gif .bin .exe
: AddIcon /icons/binhex.gif .hqx
: AddIcon /icons/tar.gif .tar
: AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
: AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
: AddIcon /icons/a.gif .ps .ai .eps
: AddIcon /icons/layout.gif .html .shtml .htm .pdf
: AddIcon /icons/text.gif .txt
: AddIcon /icons/c.gif .c
: AddIcon /icons/p.gif .pl .py
: AddIcon /icons/f.gif .for
: AddIcon /icons/dvi.gif .dvi
: AddIcon /icons/uuencoded.gif .uu
: AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
: AddIcon /icons/tex.gif .tex
: AddIcon /icons/bomb.gif core
:
: AddIcon /icons/back.gif ..
: AddIcon /icons/hand.right.gif README
: AddIcon /icons/folder.gif ^^DIRECTORY^^
: AddIcon /icons/blank.gif ^^BLANKICON^^
:
: #
: # DefaultIcon is which icon to show for files which do not have an icon
: # explicitly set.
: #
: DefaultIcon /icons/unknown.gif
:
: #
: # AddDescription allows you to place a short description after a file in
: # server-generated indexes. These are only displayed for FancyIndexed
: # directories.
: # Format: AddDescription "description" filename
: #
: #AddDescription "GZIP compressed document" .gz
: #AddDescription "tar archive" .tar
: #AddDescription "GZIP compressed tar archive" .tgz
:
: #
: # ReadmeName is the name of the README file the server will look for by
: # default, and append to directory listings.
: #
: # HeaderName is the name of a file which should be prepended to
: # directory indexes.
: #
: # If MultiViews are amongst the Options in effect, the server will
: # first look for name.html and include it if found. If name.html
: # doesn't exist, the server will then look for name.txt and include
: # it as plaintext if found.
: #
: ReadmeName README
: HeaderName HEADER
:
: #
: # IndexIgnore is a set of filenames which directory indexing should ignore
: # and not include in the listing. Shell-style wildcarding is permitted.
: #
: IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
:
: </IfModule>
: # End of indexing directives.
:
: #
: # Document types.
: #
: <IfModule mod_mime.c>
:
: #
: # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
: # information on the fly. Note: Not all browsers support this.
: # Despite the name similarity, the following Add* directives have nothing
: # to do with the FancyIndexing customization directives above.
: #
: AddEncoding x-compress Z
: AddEncoding x-gzip gz tgz
:
: #
: # AddLanguage allows you to specify the language of a document. You can
: # then use content negotiation to give a browser a file in a language
: # it can understand.
: #
: # Note 1: The suffix does not have to be the same as the language
: # keyword --- those with documents in Polish (whose net-standard
: # language code is pl) may wish to use "AddLanguage pl .po" to
: # avoid the ambiguity with the common suffix for perl scripts.
: #
: # Note 2: The example entries below illustrate that in quite
: # some cases the two character 'Language' abbreviation is not
: # identical to the two character 'Country' code for its country,
: # E.g. 'Danmark/dk' versus 'Danish/da'.
: #
: # Note 3: In the case of 'ltz' we violate the RFC by using a three char
: # specifier. But there is 'work in progress' to fix this and get
: # the reference data for rfc1766 cleaned up.
: #
: # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
: # French (fr) - German (de) - Greek-Modern (el)
: # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
: # Portugese (pt) - Luxembourgeois* (ltz)
: # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
: # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
: # Russian (ru)
: #
: AddLanguage da .dk
: AddLanguage nl .nl
: AddLanguage en .en
: AddLanguage et .ee
: AddLanguage fr .fr
: AddLanguage de .de
: AddLanguage el .el
: AddLanguage he .he
: AddCharset ISO-8859-8 .iso8859-8
: AddLanguage it .it
: AddLanguage ja .ja
: AddCharset ISO-2022-JP .jis
: AddLanguage kr .kr
: AddCharset ISO-2022-KR .iso-kr
: AddLanguage nn .nn
: AddLanguage no .no
: AddLanguage pl .po
: AddCharset ISO-8859-2 .iso-pl
: AddLanguage pt .pt
: AddLanguage pt-br .pt-br
: AddLanguage ltz .lu
: AddLanguage ca .ca
: AddLanguage es .es
: AddLanguage sv .se
: AddLanguage cz .cz
: AddLanguage ru .ru
: AddLanguage zh-tw .tw
: AddLanguage tw .tw
: AddCharset Big5 .Big5 .big5
: AddCharset WINDOWS-1251 .cp-1251
: AddCharset CP866 .cp866
: AddCharset ISO-8859-5 .iso-ru
: AddCharset KOI8-R .koi8-r
: AddCharset UCS-2 .ucs2
: AddCharset UCS-4 .ucs4
: AddCharset UTF-8 .utf8
:
: # LanguagePriority allows you to give precedence to some languages
: # in case of a tie during content negotiation.
: #
: # Just list the languages in decreasing order of preference. We have
: # more or less alphabetized them here. You probably want to change this.
: #
: <IfModule mod_negotiation.c>
: LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
: </IfModule>
:
: #
: # AddType allows you to tweak mime.types without actually editing it, or to
: # make certain files to be certain types.
: #
: # For example, the PHP 3.x module (not part of the Apache distribution - see
: # http://www.php.net) will typically use:
: #
: <IfModule mod_php3.c>
: AddType application/x-httpd-php3 .php3
: AddType application/x-httpd-php3-source .phps
: </IfModule>
: #
: # And for PHP 4.x, use:
: #
: <IfModule mod_php4.c>
: AddType application/x-httpd-php .php .php4 .php3 .phtml .ph
: AddType application/x-httpd-php-source .phps
: </IfModule>
:
: #
: # For PHP/FI (PHP2), use:
: #
: <IfModule mod_php.c>
: AddType application/x-httpd-php .phtml
: </IfModule>
:
: AddType application/x-tar .tgz
:
: #
: # AddHandler allows you to map certain file extensions to "handlers",
: # actions unrelated to filetype. These can be either built into the server
: # or added with the Action command (see below)
: #
: # If you want to use server side includes, or CGI outside
: # ScriptAliased directories, uncomment the following lines.
: #
: # To use CGI scripts:
: #
: #AddHandler cgi-script .cgi
:
: #
: # To use server-parsed HTML files
: #
: AddType text/html .shtml
: AddHandler server-parsed .shtml
:
: #
: # Uncomment the following line to enable Apache's send-asis HTTP file
: # feature
: #
: #AddHandler send-as-is asis
:
: #
: # If you wish to use server-parsed imagemap files, use
: #
: AddHandler imap-file map
:
: #
: # To enable type maps, you might want to use
: #
: #AddHandler type-map var
:
: </IfModule>
: # End of document types.
:
: #
: # Action lets you define media types that will execute a script whenever
: # a matching file is called. This eliminates the need for repeated URL
: # pathnames for oft-used CGI file processors.
: # Format: Action media/type /cgi-script/location
: # Format: Action handler-name /cgi-script/location
: #
:
: #
: # MetaDir: specifies the name of the directory in which Apache can find
: # meta information files. These files contain additional HTTP headers
: # to include when sending the document
: #
: #MetaDir .web
:
: #
: # MetaSuffix: specifies the file name suffix for the file containing the
: # meta information.
: #
: #MetaSuffix .meta
:
: #
: # Customizable error response (Apache style)
: # these come in three flavors
: #
: # 1) plain text
: #ErrorDocument 500 "The server made a boo boo.
: # n.b. the single leading (") marks it as text, it does not get output
: #
: # 2) local redirects
: #ErrorDocument 404 /missing.html
: # to redirect to local URL /missing.html
: #ErrorDocument 404 /cgi-bin/missing_handler.pl
: # N.B.: You can redirect to a script or a document using server-side-includes.
: #
: # 3) external redirects
: #ErrorDocument 402 http://some.other_server.com/subscription_info.html : # N.B.: Many of the environment variables a
: ssociated with the original # request will *not* be available to such a script.
:
: #
: # Customize behaviour based on the browser
: #
: <IfModule mod_setenvif.c>
:
: #
: # The following directives modify normal HTTP response behavior.
: # The first directive disables keepalive for Netscape 2.x and browsers that
: # spoof it. There are known problems with these browser implementations.
: # The second directive is for Microsoft Internet Explorer 4.0b2
: # which has a broken HTTP/1.1 implementation and does not properly
: # support keepalive when it is used on 301 or 302 (redirect) responses.
: #
: BrowserMatch "Mozilla/2" nokeepalive
: BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
:
: #
: # The following directive disables HTTP/1.1 responses to browsers which
: # are in violation of the HTTP/1.0 spec by not being able to grok a
: # basic 1.1 response.
: #
: BrowserMatch "RealPlayer 4.0" force-response-1.0
: BrowserMatch "Java/1.0" force-response-1.0
: BrowserMatch "JDK/1.0" force-response-1.0
:
: </IfModule>
: # End of browser customization directives
:
: #
: # If the perl module is installed, this will allow execution of mod_perl
: # to compile your scripts to subroutines which it will execute directly,
: # avoiding the costly compile process for most requests.
: #
: #<IfModule mod_perl.c>
: # Alias /perl /var/www/perl
: # <Directory /var/www/perl>
: # SetHandler perl-script
: # PerlHandler Apache::Registry
: # Options +ExecCGI
: # </Directory>
: #</IfModule>
:
: #
: # Allow http put (such as Netscape Gold's publish feature)
: # Use htpasswd to generate /etc/httpd/conf/passwd.
: #
: #<IfModule mod_put.c>
: # Alias /upload /tmp
: # <Directory /tmp>
: # EnablePut On
: # AuthType Basic
: # AuthName Temporary
: # AuthUserFile /etc/httpd/conf/passwd
: # EnableDelete Off
: # umask 007
: # <Limit PUT>
: # require valid-user
: # </Limit>
: # </Directory>
: #</IfModule>
:
: #
: # Allow server status reports, with the URL of http://servername/server-status
: # Change the ".your_domain.com" to match your domain to enable.
: #
: #<Location /server-status>
: # SetHandler server-status
: # Order deny,allow
: # Deny from all
: # Allow from .your_domain.com
: #</Location>
:
: #
: # Allow remote server configuration reports, with the URL of
: # http://servername/server-info (requires that mod_info.c be loaded).
: # Change the ".your_domain.com" to match your domain to enable.
: #
: #<Location /server-info>
: # SetHandler server-info
: # Order deny,allow
: # Deny from all
: # Allow from .your_domain.com
: #</Location>
:
: #
: # Allow access to local system documentation from localhost
: #
: Alias /doc/ /usr/share/doc/
: <Directory /usr/share/doc>
: order deny,allow
: deny from all
: allow from localhost .localdomain
: Options Indexes FollowSymLinks
: </Directory>
:
: #
: # There have been reports of people trying to abuse an old bug from pre-1.1
: # days. This bug involved a CGI script distributed as a part of Apache.
: # By uncommenting these lines you can redirect these attacks to a logging
: # script on phf.apache.org. Or, you can record them yourself, using the script
: # support/phf_abuse_log.cgi.
: #
: #<Location /cgi-bin/phf*>
: # Deny from all
: # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi : #</Location>
:
: #
: # Proxy Server directives. Uncomment the following lines to
: # enable the proxy server:
: #
: #<IfModule mod_proxy.c>
: # ProxyRequests On
:
: # <Directory proxy:*>
: # Order deny,allow
: # Deny from all
: # Allow from .your_domain.com
: # </Directory>
:
: #
: # Enable/disable the handling of HTTP/1.1 "Via:" headers.
: # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
: # Set to one of: Off | On | Full | Block
: #
: # ProxyVia On
:
: #
: # To enable the cache as well, edit and uncomment the following lines:
: # (no caching without CacheRoot)
: #
: # CacheRoot "/var/cache/httpd"
: # CacheSize 5
: # CacheGcInterval 4
: # CacheMaxExpire 24
: # CacheLastModifiedFactor 0.1
: # CacheDefaultExpire 1
: # NoCache a_domain.com another_domain.edu joes.garage_sale.com
:
: #</IfModule>
: # End of proxy directives.
:
: ### Section 3: Virtual Hosts
: #
: # VirtualHost: If you want to maintain multiple domains/hostnames on your
: # machine you can setup VirtualHost containers for them. Most configurations
: # use only name-based virtual hosts so the server doesn't need to worry about
: # IP addresses. This is indicated by the asterisks in the directives below.
: #
: # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
: # for further details before you try to setup virtual hosts.
: #
: # You may use the command line option '-S' to verify your virtual host
: # configuration.
:
: #
: # Use name-based virtual hosting.
: #
: #NameVirtualHost *
:
: #
: # VirtualHost example:
: # Almost any Apache directive may go into a VirtualHost container.
: # The first VirtualHost section is used for requests without a known
: # server name.
: #
: #<VirtualHost *>
: # ServerAdmin webmaster at
: dummy-host.example.com
: # DocumentRoot /www/docs/dummy-host.example.com
: # ServerName dummy-host.example.com
: # ErrorLog logs/dummy-host.example.com-error_log
: # CustomLog logs/dummy-host.example.com-access_log common
: #</VirtualHost>
:
: #<VirtualHost _default_:*>
: #</VirtualHost>
:
: ##
: ## SSL Global Context
: ##
: ## All SSL configuration in this context applies both to
: ## the main server and all SSL-enabled virtual hosts.
: ##
:
: #
: # Some MIME-types for downloading Certificates and CRLs
: #
: <IfDefine HAVE_SSL>
: AddType application/x-x509-ca-cert .crt
: AddType application/x-pkcs7-crl .crl
: </IfDefine>
:
: <IfModule mod_ssl.c>
:
: # Pass Phrase Dialog:
: # Configure the pass phrase gathering process.
: # The filtering dialog program (`builtin' is a internal
: # terminal dialog) has to provide the pass phrase on stdout.
: SSLPassPhraseDialog builtin
:
: # Inter-Process Session Cache:
: # Configure the SSL Session Cache: First the mechanism
: # to use and second the expiring timeout (in seconds).
: #SSLSessionCache none
: #SSLSessionCache shmht:logs/ssl_scache(512000)
: #SSLSessionCache shmcb:logs/ssl_scache(512000)
: SSLSessionCache shm:logs/ssl_scache(512000)
: SSLSessionCacheTimeout 300
:
: # Semaphore:
: # Configure the path to the mutual exclusion semaphore the
: # SSL engine uses internally for inter-process synchronization.
: SSLMutex file:logs/ssl_mutex
:
: # Pseudo Random Number Generator (PRNG):
: # Configure one or more sources to seed the PRNG of the
: # SSL library. The seed data should be of good random quality.
: # WARNING! On some platforms /dev/random blocks if not enough entropy
: # is available. This means you then cannot use the /dev/random device
: # because it would lead to very long connection times (as long as
: # it requires to make more entropy available). But usually those
: # platforms additionally provide a /dev/urandom device which doesn't
: # block. So, if available, use this one instead. Read the mod_ssl User
: # Manual for more details.
: SSLRandomSeed startup builtin
: SSLRandomSeed connect builtin
: #SSLRandomSeed startup file:/dev/random 512
: #SSLRandomSeed startup file:/dev/urandom 512
: #SSLRandomSeed connect file:/dev/random 512
: #SSLRandomSeed connect file:/dev/urandom 512
:
: # Logging:
: # The home of the dedicated SSL protocol logfile. Errors are
: # additionally duplicated in the general error log file. Put
: # this somewhere where it cannot be used for symlink attacks on
: # a real server (i.e. somewhere where only root can write).
: # Log levels are (ascending order: higher ones include lower ones):
: # none, error, warn, info, trace, debug.
: SSLLog logs/ssl_engine_log
: SSLLogLevel error
:
: </IfModule>
:
: <IfDefine HAVE_SSL>
:
: ##
: ## SSL Virtual Host Context
: ##
:
: <VirtualHost _default_:443>
:
: # General setup for the virtual host
: #DocumentRoot "/etc/httpd/htdocs"
: #ServerName new.host.name
: #ServerAdmin you at your.address
: ErrorLog logs/error_log
: TransferLog logs/access_log
:
: # SSL Engine Switch:
: # Enable/Disable SSL for this virtual host.
: SSLEngine on
:
: # SSL Cipher Suite:
: # List the ciphers that the client is permitted to negotiate.
: # See the mod_ssl documentation for a complete list.
: #SSLCipherSuite
: ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
:
: # Server Certificate:
: # Point SSLCertificateFile at a PEM encoded certificate. If
: # the certificate is encrypted, then you will be prompted for a
: # pass phrase. Note that a kill -HUP will prompt again. A test
: # certificate can be generated with `make certificate' under
: # built time. Keep in mind that if you've both a RSA and a DSA
: # certificate you can configure both in parallel (to also allow
: # the use of DSA ciphers, etc.)
: SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
: #SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt
:
: # Server Private Key:
: # If the key is not combined with the certificate, use this
: # directive to point at the key file. Keep in mind that if
: # you've both a RSA and a DSA private key you can configure
: # both in parallel (to also allow the use of DSA ciphers, etc.)
: SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key
: #SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key
:
: # Server Certificate Chain:
: # Point SSLCertificateChainFile at a file containing the
: # concatenation of PEM encoded CA certificates which form the
: # certificate chain for the server certificate. Alternatively
: # the referenced file can be the same as SSLCertificateFile
: # when the CA certificates are directly appended to the server
: # certificate for convinience.
: #SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt
:
: # Certificate Authority (CA):
: # Set the CA certificate verification path where to find CA
: # certificates for client authentication or alternatively one
: # huge file containing all of them (file must be PEM encoded)
: # Note: Inside SSLCACertificatePath you need hash symlinks
: # to point to the certificate files. Use the provided
: # Makefile to update the hash symlinks after changes.
: #SSLCACertificatePath /etc/httpd/conf/ssl.crt
: #SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt
:
: # Certificate Revocation Lists (CRL):
: # Set the CA revocation path where to find CA CRLs for client
: # authentication or alternatively one huge file containing all
: # of them (file must be PEM encoded)
: # Note: Inside SSLCARevocationPath you need hash symlinks
: # to point to the certificate files. Use the provided
: # Makefile to update the hash symlinks after changes.
: #SSLCARevocationPath /etc/httpd/conf/ssl.crl
: #SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl
:
: # Client Authentication (Type):
: # Client certificate verification type and depth. Types are
: # none, optional, require and optional_no_ca. Depth is a
: # number which specifies how deeply to verify the certificate
: # issuer chain before deciding the certificate is not valid.
: #SSLVerifyClient require
: #SSLVerifyDepth 10
:
: # Access Control:
: # With SSLRequire you can do per-directory access control based
: # on arbitrary complex boolean expressions containing server
: # variable checks and other lookup directives. The syntax is a
: # mixture between C and Perl. See the mod_ssl documentation
: # for more details.
: #<Location />
: #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/
: # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd."
: # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"}
: # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5
: # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 )
: # or %{REMOTE_ADDR} =~ m/^192.76.162.[0-9]+$/
: #</Location>
:
: # SSL Engine Options:
: # Set various options for the SSL engine.
: # o FakeBasicAuth:
: # Translate the client X.509 into a Basic Authorisation. This means that
: # the standard Auth/DBMAuth methods can be used for access control. The
: # user name is the `one line' version of the client's X.509 certificate.
: # Note that no password is obtained from the user. Every entry in the user
: # file needs this password: `xxj31ZMTZzkVA'.
: # o ExportCertData:
: # This exports two additional environment variables: SSL_CLIENT_CERT and
: # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
: # server (always existing) and the client (only existing when client
: # authentication is used). This can be used to import the certificates
: # into CGI scripts.
: # o StdEnvVars:
: # This exports the standard SSL/TLS related `SSL_*' environment variables.
: # Per default this exportation is switched off for performance reasons,
: # because the extraction step is an expensive operation and is usually
: # useless for serving static content. So one usually enables the
: # exportation for CGI and SSI requests only.
: # o CompatEnvVars:
: # This exports obsolete environment variables for backward compatibility
: # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
: # to provide compatibility to existing CGI scripts.
: # o StrictRequire:
: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
: # under a "Satisfy any" situation, i.e. when it applies access is denied
: # and no other module can change it.
: # o OptRenegotiate:
: # This enables optimized SSL connection renegotiation handling when SSL
: # directives are used in per-directory context.
: #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
: <Files ~ ".(cgi|shtml|phtml|php3?)$">
: SSLOptions +StdEnvVars
: </Files>
: <Directory "/var/www/cgi-bin">
: SSLOptions +StdEnvVars
: </Directory>
:
: # SSL Protocol Adjustments:
: # The safe and default but still SSL/TLS standard compliant shutdown
: # approach is that mod_ssl sends the close notify alert but doesn't wait for
: # the close notify alert from client. When you need a different shutdown
: # approach you can use one of the following variables:
: # o ssl-unclean-shutdown:
: # This forces an unclean shutdown when the connection is closed, i.e. no
: # SSL close notify alert is send or allowed to received. This violates
: # the SSL/TLS standard but is needed for some brain-dead browsers. Use
: # this when you receive I/O errors because of the standard approach where
: # mod_ssl sends the close notify alert.
: # o ssl-accurate-shutdown:
: # This forces an accurate shutdown when the connection is closed, i.e. a
: # SSL close notify alert is send and mod_ssl waits for the close notify
: # alert of the client. This is 100% SSL/TLS standard compliant, but in
: # practice often causes hanging connections with brain-dead browsers. Use
: # this only for browsers where you know that their SSL implementation
: # works correctly.
: # Notice: Most problems of broken clients are also related to the HTTP
: # keep-alive facility, so you usually additionally want to disable
: # keep-alive for those clients, too. Use variable "nokeepalive" for this.
: # Similarly, one has to force some clients to use HTTP/1.0 to workaround
: # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
: # "force-response-1.0" for this.
: SetEnvIf User-Agent ".*MSIE.*"
: nokeepalive ssl-unclean-shutdown
: downgrade-1.0 force-response-1.0
:
: # Per-Server Logging:
: # The home of a custom SSL log file. Use this when you want a
: # compact non-error SSL logfile on a virtual host basis.
: CustomLog logs/ssl_request_log
: "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x "%r" %b"
:
: </VirtualHost>
:
: </IfDefine>
:
: --
: 으..뒷골이야.. 넘많이 DDR했어--열심히 삽질 하자 허접삽질 엽기 삽질
삶이 속일지라도 세상이 버릴지라도 난 포기 하지 않는다
http://xjoin.net:8880