제 해상도가 1024X768 에 85Hz 인데요... 보니까 1400X1050 밖에 없네요..
이거 어쩌죠... 밑에 내용은 XF86Config-4 의 내용입니다.
 # File generated by anaconda.
 Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
 Section "Files"
 # The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
 RgbPath "/usr/X11R6/lib/X11/rgb"
 # Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
 FontPath "unix/:7100"
 EndSection
 Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "pex5"
Load "dri"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
EndSection
 Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
 # Option "AutoRepeat" "500 5"
 # when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
 # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
 # To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
 # To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
 Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
 Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-70
VertRefresh 50-160
 # -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
 # 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
 # 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
 # 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
 EndSection
 Section "Device"
# no known options
Identifier "NVIDIA GeForce 2 (generic)"
Driver "nv"
VendorName "NVIDIA GeForce 2 (generic)"
BoardName "NVIDIA GeForce 2 (generic)"
 #BusID
EndSection
 Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 2 (generic)"
Monitor "Monitor0"
DefaultDepth 24
 Subsection "Display"
Depth 24
Modes "1024x768"
EndSubsection
 EndSection
 Section "DRI"
Mode 0666
EndSection
      : : <시스템 사양>
: :
: : 사용배포본 : 와우리눅스 7.1 파란 (한컴 KDE 2.2.1)
: : VGA        : NVIDIA Quadro2 Pro (NV15GL)
: : M/B        : Abit SA6 (i815EP, ICH2)
: : CPU        : Intel Pentium III 1GHz (FSB133)
: : HDD        : SAMSUNG SV2042, SV3063 (ATA100)
: : Sound Card : SoundBlaster Live! DE (CT4670)
: : LAN Card  : 3Com Etherlink 10/100 905B
: :
: : 안녕하세요.
: : 궁금해서 질문드립니다
: : 리눅스에서 화면이 한쪽으로 쏠려 모니터로 재대로 마추니 윈도우즈에서 쏠리고 그래
: : 서 리눅스에서 /usr/x11R6/xvidtdune를 실행하여 모니터를 재대로 마추고 /etc/x11/xf86config 의 10
: : 24X768 (제가 사용하는 해상도)의 modeline의 값을 수정하였거든요? 근데 xwindow를 재시작하
: : 거나 재부팅 하면 다시 한쪽으로 쏠리는 화면으로 돌아와 버립니다. 이거 xwindow를 재시
: : 작하거나 재부팅 하더라도 설정값 그대로 나오게 할려면 어떻게 해야 하나요? 답변 주
: : 시면 감사하겠습니다. 그럼 좋은 하루 되세요... -- BONOBONO.COM
:
: 저두 그것 때문에 고생한적이...
: 결론은 /etc/x11/xf86config-4 파일을 고치시면 됩니다.. 
:
: 그럼 초보에 허접한 답변 ^^--BONOBONO.COM