일단은 전체선택하셔서 메모장으로 옮겨보세요..글구.. 밑에로 내려가면 간단 설명서 있
으니까 참고 하시고요... +++++++++>>>>>2141 에 간단 메뉴얼있어요++++++++++++++>그럼 .. 안뇽..    
  XBF_i740, Version 1.0.0, 21 December 1998This FREE (see the license below) full featured X Server contains: * Full s
upport for 8, 15, 16, 24 and 32 bit per pixel depths. * Hardware cursor support to reduce sprite flicker. * Hardware a
ccelerated 2D drawing engine support for 8, 15, 16 and 24   bit per pixel depths. * Support for high resolution video 
modes up to 1600x1200. * Support for doublescan video modes (e.g., 320x200 and 320x240). * Support for gamma correctio
n at all pixel depths. * Fully programmable clock supported. * Robust text mode restore for VT switching.Tested Video 
Cards * Real3D Starfighter AGP * Diamond Stealth II/G460 AGPReported Working Video Cards: * 3DVision-i740 AGP * ABIT
 G740 8MB SDRAM * AGP 2D/3D V. 1N, AGP-740D * ARISTO i740 AGP (ART-i740-G) * ASUS AGP-V2740 * Chaintech AGP-740D * 
EliteGroup(ECS) 3DVision-i740 AGP * EONtronics Picasso 740 * EONtronics Van Gogh * Everex MVGA i740/AG * Flagpoint S
hocker i740 8MB * Gainward CardExpert 740 8MB * Gigabyte Predator i740 8MB AGP * Hercules Terminator 128 2X/i AGP * 
Intel Express 3D AGP * Jaton Video-740 AGP 3D * Joymedia Apollo 7400 * Leadtek Winfast S900 * Machspeed Raptor i740 
AGP 4600 * Magic-Pro MP-740DVD * MAXI Gamer AGP 8 MB * Palit Daytona AGP740 * QDI Amazing I * Soyo AGP (SY-740 AGP)
 * VideoExcel AGP 740 * ViewTop ZeusL 8MB  * Winfast S900 i740 AGP 8MB     CAUTION: Running this server on untested
 video cards poses a potentialrisk of damaging your video card and display.  You assume all risks inusing this X server
 on untested video cards; however, if yousuccessfully run this server on a video card not listed here, we wouldlike to h
ear from you.  Please e-mail your video card make and modelto us at "xbf_support at redhat.com".Red Hat and Precision Insi
ght, Inc. disclaim all warranties withregard to this X server.  In no event shall Red Hat or PrecisionInsight, Inc. be 
liable for any damages whatsoever resulting from theuse of this X server.This commercial quality X Server has been teste
d with only the Real3DStarfighter AGP and the Diamond Stealth II/G460 AGP card at this time.This Free server is distribu
ted in binary form only to conform withthe Non Disclosure Agreement required by Intel.  If and when this nondisclosure 
requirement is removed by Intel, all of the source code forthis driver will be contributed to the XFree86 project.Downlo
ad and Installation InstructionsAlthough you can place the downloaded .rpm file in any directory ofyour choosing, we sug
gest you ftp the file into the /tmp directory andthen execute the appropriate RPM command from that directory toinstall 
the .rpm file.  When the RPM command runs, it willautomatically place the component files of the X Server into thecorre
ct locations in your system.Red Hat 5.x (glibc) systems:-        1) get the file to your system           cd /t
mp           ftp://ftp.redhat.com/pub/XBF/XBF-i740-glibc-1.0.0-1.i386.rpm        2) install the files using RPM
           rpm -ivh XBF-i740-glibc-1.0.0-1.i386.rpm        3) after installing, run (as root):           l
n -sf /usr/X11R6/bin/XBF_i740 /etc/X11/XRed Hat 4.x (libc5 systems):-        1) get the file to your system      
     cd /tmp           ftp://ftp.redhat.com/pub/XBF/XBF-i740-libc5-1.0.0-1.i386.rpm        2) install the fil
es using RPM           rpm -ivh XBF-i740-libc5-1.0.0-1.i386.rpm        3) after installing, run (as root):   
        ln -sf /usr/X11R6/bin/XBF_i740 /etc/X11/X           chmod 4711 /usr/X11R6/bin/XBF_i740IMPORTANT NOTE:Aft
er installing the X server, an XF86Config file needs to be set upfor your computer.  For Red Hat 4.x and 5.x systems, t
his file is in"/etc/X11/XF86Config".  See the manual page for XF86Config for moreinformation on how to properly setup t
his file for your computer.  Fora description of the supported device configuration options, see theREADME file include
d in this release.To ease the setting up of the XF86Config file, a new "xf86config"program that has support for the XBF_
i740 X server can be found in thesame directory as the X server.  To use this program:Red Hat 5.x (glibc) systems:-  
      1) get the file to your system           cd /tmp           ftp://ftp.redhat.com/pub/XBF/xf86config-gl
ibc-1.0.0.i386.tgz        2) install the files (as root):           cd /           tar -xvzf /tmp/xf86conf
ig-glibc-1.0.0.i386.tgz        3) run "xf86config" as rootRed Hat 4.x (libc5 systems):-        1) get the file t
o your system           cd /tmp           ftp://ftp.redhat.com/pub/XBF/xf86config-libc5-1.0.0.i386.tgz     
   2) install the files (as root):           cd /           tar -xvzf /tmp/xf86config-libc5-1.0.0.i386.tgz  
      3) run "xf86config" as rootHere are some hints as to how to use xf86config:1) While running xf86config, you wil
l need to answer several questions   about your mouse, monitor and video card.  This information should   be found in
 the manuals that came with your system.2) When you reach the section to choose a particular video card,   xf86config w
ill ask you:   Do you want to look at the card database?    Answer, "yes" and choose the number of the video card that
 most   closely matches your system.  The cards that have been tested or   have been reported to work (see above) are
 included in this list.3) Next, xf86config will ask you:   Which one of these screen types do you intend to run by defa
ult (1-5)?   Answer, "5" since that is the one that corresponds to the card   definition you just choose (from hint #2
, above).4) Since you have already set the symbolic link (above), you do not   want xf86config to set it again, so answ
er "no" to this question.5) No special RAMDAC is needed with the XBF_i740 X server, so when   xf86config asks you to ch
oose a RAMDAC, you can enter "q" to safely   quit without selecting a RAMDAC.6) No special Clockchip setting is require
d with the XBF_i740 X   server, so you can simply press Enter, when xf86config asks you   what Clockchip setting you w
ant.7) It is not necessary to probe the clocks with the XBF_i740 X server,   so you do not need to have xf86config run 
'X -probeonly'.8) For RedHat 4.x and RedHat 5.x systems, the XF86Config file should   be written to /etc/X11/XF86Config
.  For other systems, it should be   written to /etc/XF86Config.If you have any questions or problems with this X serv
er:PLEASE CHECK THE FAQ AT http://www.precisioninsight.com/faq.html BEFORESENDING EMAIL TO THE SUPPORT EMAIL ADDRESSIf t
he FAQ does not help you solve the problem, you may send email to"xbf_support at redhat.com".  Please do NOT send any emai
l to XFree86regarding this X server.Please note that this software is released under the XBF License below.End User Lice
nse Agreement for the XBF X server ("Software")I. PREAMBLEThis License Agreement ("License") sets forth the terms and co
nditionsunder which Red Hat Software, Inc. grants you certain rights andlicenses with respect to the Software.  Please 
review this agreementcarefully before you use the Software or install it on a computer.This License generally allows you
 to copy, sublicense and distributethe Software, subject to the following terms and conditions.  However,nothing in thi
s License grants you any right, license or interest withrespect to the source code for the Software.II. GRANT OF RIGHTS:
A. The rights stated in this License are non-exclusive and are grantedto you without fee.B. You may install and/or use t
he Software on as many computers as youwish at any time.C. You may copy, sublicense and distribute the Software in its e
ntiretyprovided that you:1. Conspicuously publish on each copy of the Software the appropriatecopyright notice and the c
omplete terms and conditions of this License;2. Keep intact all notices that refer to this License and to theabsence of 
any warranty; and3. Give any other recipients and sublicensees of the Software a copy ofthis License along with the Soft
ware, and make it clear to any and allrecipients and sublicensees that the terms and conditions of thisLicense shall gov
ern their use of the Software.D. You may, but are not required to, charge a fee to persons to whomyou copy and redistrib
ute the Software, and you may at your optionoffer warranty protection for a fee to any person to whom youdistribute the 
Software.  Each person or entity to whom you sublicensethe Software must receive it under no more restrictive terms and
conditions than set forth in this License.III. YOU MAY NOT:A. Modify, decompile, reverse assemble or otherwise reverse e
ngineerthe Software, or create derivative works based on the Software, orauthorize any third party to do any of the abov
e; andB. Copy, sublicense, or distribute the Software except as expresslypermitted in this License.  Any attempt to cop
y, sublicense ordistribute the Program in a manner inconsistent with this License isvoid, and will automatically termina
te your rights under this License.IV. TITLEThe Software is protected by copyright and other laws.  Title,ownership righ
ts, and intellectual property rights in the Softwareshall remain with Red Hat Software, Inc. and/or its suppliers.  You
acknowledge these ownership and intellectual property rights, and agreenot to take any action to jeopardize or infringe 
upon any of theserights with respect to the Software.  The rights granted to you in thisLicense do not include any inte
rest in any intellectual property rightsin the Software.V. NO WARRANTYTHERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTE
NT PERMITTED BYAPPLICABLE LAW.  EXCEPT AS OTHERWISE STATED IN WRITING, THE SOFTWARE ISPROVIDED AND LICENSED "AS IS" WIT
HOUT WARRANTY OF ANY KIND, EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OFMERCHANTABILITY AN
D FITNESS FOR A PARTICULAR PURPOSE.VI. LIMITATION OF LIABILITYTO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO E
VENT WILL REDHAT SOFTWARE, INC. OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES,INCLUDING LOST PROFITS, LOST SAVINGS, 
OR OTHER INCIDENTAL ORCONSEQUENTIAL DAMAGES, ARISING OUT OF THE USE OR INABILITY TO USE THESOFTWARE, EVEN IF RED HAT SOF
TWARE, INC. OR A DEALER AUTHORIZED BY REDHAT SOFTWARE, INC. HAD BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.VII. GEN
ERALThis License represents the complete agreement concerning the rightsgranted in this License, and may be amended only
 in a writing signed byboth parties.  If any provision of this Agreement is held to beunenforceable, the enforceability
 of the remaining provisions shall inno way be affected or impaired.  This Agreement shall be governed bythe laws of th
e United States.Copyright ?1998 Red Hat Software, Inc.  All rights reserved.