dmfe.c: Version 1.27 10/08/1999
A CNet PRO200 DM9102(A)/DM9132/DM9801 fast ethernet driver
for Linux.
Copyright (C) 1997 Sten Wang
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
A. Compiler command:
"gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
-Wstrict-prototypes -O6 -c dmfe.c"
OR
"gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net -Wall
-Wstrict-prototypes -O6 -c dmfe.c"
B. The following steps teach you how to active CNet PRO200 board:
1. Used the upper compiler command to compile dmfe.c
2. Insert dmfe module into kernel
"insmod dmfe" ;;Auto Detection Mode (Suggest)
"insmod dmfe mode=0" ;;Force 10M Half Duplex
"insmod dmfe mode=1" ;;Force 100M Half Duplex
"insmod dmfe mode=4" ;;Force 10M Full Duplex
"insmod dmfe mode=5" ;;Force 100M Full Duplex
3. Config a CNet PRO200 network interface
"ifconfig eth0 172.22.3.18"
^^^^^^^^^^^ Your IP address
4. Active the IP routing table. For some distributions, it is not
necessary. You can type "route" to check.
"route add -net 172.22.3.0 eth0"
5. Well done. Your CNet PRO200 Adapter actived now.
C. The driver has been verified in the following kernals:
kernel version 2.2.5
RedHat6.0 kernel version 2.2.5-15
kernel version 2.2.12
kernel version 2.3.18
Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang at davicom.com.tw