>> Edit article

			이름
			제목
			패스워드

아래는 부팅시 나오는 내용이구여.... Board Name: <K7V>. Board Version: REV 1.xx. Asset Tag: Asset-1234567890. Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169704kB/56568kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:4.1     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MPE3084AE, ATA DISK drive ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hdc: CRD-8402B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(66) 위에서 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 부분에 대한 설명과 VP_IDE: not 100% native mode: will probe irqs later 에 대해 수정(?)하는 방법좀 알려주세요... 하드는 udma66으로 나오는데 실제는 33으로 되는것 같거든요. 참고로 현재 시스템에서 나오는 속도는 다음과 같습니다. /dev/hda:  Timing buffered disk reads:  64 MB in  2.96 seconds = 21.62 MB/sec

Copyleft 1999-2026 by JSBoard Open Project Theme Designed by IDOO All right reserved