>> Edit article
이름
제목
패스워드
uname -a 에서 커널번호가 바뀌었는지 확인하시고... ifconfig -a 에서 lo와 eth0가 다 올라왔는지 , 내용은 맞는지 확인해보시고... 메세지까지 같이올려주시면 이해하기가 고맙겠습니다. : 2.2.12 커널에서 2.2.18 로 컴파일 하고 : : 부팅하니까 아래와 같은 부팅화면이 나옵니다.. : : : Linux version 2.2.12-20kr (root@linuxone.alzzalinux.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Tue Oct 12 16:46:36 KST 1999 : Detected 651490779 Hz processor. : Console: colour VGA+ 80x25 : Calibrating delay loop... 650.44 BogoMIPS : Memory: 122560k/125952k available (1048k kernel code, 412k reserved, 1588k data, 64k init) : DENTRY hash table entries: 262144 (order: 9, 2097152 bytes) : Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) : Page-cache hash table entries: 32768 (order: 5, 131072 bytes) : VFS: Diskquotas version dquot_6.4.0 initialized : Pentium-III serial number disabled. : CPU: Intel Pentium III (Coppermine) stepping 03 : Checking 386/387 coupling... OK, FPU using exception 16 error reporting. : Checking 'hlt' instruction... OK. : POSIX conformance testing by UNIFIX : mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) : PCI: PCI BIOS revision 2.10 entry at 0xfd9b0 : PCI: Using configuration type 1 : PCI: Probing PCI hardware : PCI: Enabling I/O for device 01:50 : PCI: Enabling I/O for device 01:70 : Linux NET4.0 for Linux 2.2 : Based upon Swansea University Computer Society NET3.039 : NET4: Unix domain sockets 1.0 for Linux NET4.0. : NET4: Linux TCP/IP 1.0 for NET4.0 : IP Protocols: ICMP, UDP, TCP, IGMP : TCP: Hash tables configured (ehash 131072 bhash 65536) : Initializing RT netlink socket : Starting kswapd v 1.5 : Detected PS/2 Mouse Port. : Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled : ttyS00 at 0x03f8 (irq = 4) is a 16550A : pty: 256 Unix98 ptys configured : apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) : Real Time Clock Driver v1.09 : RAM disk driver initialized: 16 RAM disks of 4096K size : PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411 : PCI_IDE: not 100% native mode: will probe irqs later : ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio : ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio : hda: QUANTUM FIREBALLlct15 20, ATA DISK drive : hdc: SAMSUNG SC-148P, ATAPI CDROM drive : ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 : ide1 at 0x170-0x177,0x376 on irq 15 : hda: QUANTUM FIREBALLlct15 20, 19470MB w/418kB Cache, CHS=2482/255/63 : hdc: ATAPI 48X CD-ROM drive, 128kB Cache : Uniform CDROM driver Revision: 2.56 : Floppy drive(s): fd0 is 1.44M : FDC 0 is a National Semiconductor PC87306 : md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 : raid5: measuring checksumming speed : raid5: MMX detected, trying high-speed MMX checksum routines : pII_mmx : 1449.324 MB/sec : p5_mmx : 1522.095 MB/sec : 8regs : 1118.997 MB/sec : 32regs : 627.126 MB/sec : using fastest function: p5_mmx (1522.095 MB/sec) : scsi : 0 hosts. : scsi : detected total. : md.c: sizeof(mdp_super_t) = 4096 : Partition check: : hda: hda1 hda2 < hda5 hda6 > hda3 : RAMDISK: Compressed image found at block 0 : autodetecting RAID arrays : autorun ... : ... autorun DONE. : VFS: Mounted root (ext2 filesystem). : autodetecting RAID arrays : autorun ... : ... autorun DONE. : VFS: Mounted root (ext2 filesystem) readonly. : change_root: old root has d_count=1 : Trying to unmount old root ... okay : Freeing unused kernel memory: 64k freed : Adding Swap: 385520k swap-space (priority -1) : Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 : sb: dsp reset failed. : YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 : OPL3 not detected ff : ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html : WARNING: The PCI BIOS assigned this PCI NE2k card to IRQ 0, which is unlikely to work!. : You should use the PCI BIOS setup to assign a valid IRQ line. : ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x3000, IRQ 0. : eth0: RealTek RTL-8029 found at 0x3000, IRQ 0, 00:E0:29:4E:A8:6B. : : : : 컴파일이 정상적으로 이루어진건지 알고 싶구요.. : : 네트워크(이더넷)이 잘 설치됐는지 알고 싶습니다.. : : ping 명령어로 (ping test)를 해봤는데. : : 네트워크를 이용할수없다고 나오네여.. : : 전 유동 ip를 쓰는데.. : : 어케하면 네트워크 사용가능한지 확인할수 있을까여? : : -- : 찬성합니다..--네가 꿈을 갖더라도 그 꿈의 노예가 되지않을 수 있다면...
Copyleft
1999-2026 by
JSBoard Open Project
Theme Designed by
IDOO
All right reserved