>> Edit article
이름
제목
패스워드
Directory Options 에 ExecCGI 를 추가하시면 됩니다. 그리고, 아파치 재구동하시면 됩니다. 예를 들어 아래처럼.. <Directory /> Options FollowSymLinks ExecCGI<-- 추가부분 AllowOverride None </Directory> <Directory "/home/httpd/html"> Options Indexes Includes FollowSymLinks ExecCGI <--- 추가부분 AllowOverride None Order allow,deny Allow from all </Directory> 그럼, 수고하세요 : cgi 가 안됩니다. : perl로 짠 cgi의 실행이 되지 않습니다. : 실행시키면 Internal Server Error 에러가 나옵니다. : 와우리눅스 6.2 를 설치했고 아파치의 httpd.conf 는 아래와 같습니다. : 꼭 답변 부탁드립니다. : 가능하시면 메일로 알려 주세요.... : kyunghs@popsmail.com : : ## : ## httpd.conf -- Apache HTTP server configuration file : ## : : # : # Based upon the NCSA server configuration files originally by Rob McCool. : # : # This is the main Apache server configuration file. It contains the : # configuration directives that give the server its instructions. : # See <URL:http://www.apache.org/docs/> for detailed information about : # the directives. : # : # Do NOT simply read the instructions in here without understanding : # what they do. They're here only as hints or reminders. If you are unsure : # consult the online docs. You have been warned. : # : # After this file is processed, the server will look for and process : # /usr/conf/srm.conf and then /usr/conf/access.conf : # unless you have overridden these with ResourceConfig and/or : # AccessConfig directives here. : # : # The configuration directives are grouped into three basic sections: : # 1. Directives that control the operation of the Apache server process as a : # whole (the 'global environment'). : # 2. Directives that define the parameters of the 'main' or 'default' server, : # which responds to requests that aren't handled by a virtual host. : # These directives also provide default values for the settings : # of all virtual hosts. : # 3. Settings for virtual hosts, which allow Web requests to be sent to : # different IP addresses or hostnames and have them handled by the : # same Apache server process. : # : # Configuration and logfile names: If the filenames you specify for many : # of the server's control files begin with "/" (or "drive:/" for Win32), the : # server will use that explicit path. If the filenames do *not* begin : # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" : # with ServerRoot set to "/usr/local/apache" will be interpreted by the : # server as "/usr/local/apache/logs/foo.log". : # : : ### Section 1: Global Environment : # : # The directives in this section affect the overall operation of Apache, : # such as the number of concurrent requests it can handle or where it : # can find its configuration files. : # : : # : # ServerType is either inetd, or standalone. Inetd mode is only supported on : # Unix platforms. : # : ServerType standalone : : # : # ServerRoot: The top of the directory tree under which the server's : # configuration, error, and log files are kept. : # : # NOTE! If you intend to place this on an NFS (or otherwise network) : # mounted filesystem then please read the LockFile documentation : # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); : # you will save yourself a lot of trouble. : # : # Do NOT add a slash at the end of the directory path. : # : ServerRoot "/etc/httpd" : : # : # The LockFile directive sets the path to the lockfile used when Apache : # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or : # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at : # its default value. The main reason for changing it is if the logs : # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL : # DISK. The PID of the main server process is automatically appended to : # the filename. : # : LockFile /var/lock/httpd.lock : : # : # PidFile: The file in which the server should record its process : # identification number when it starts. : # : PidFile /var/run/httpd.pid : : # : # ScoreBoardFile: File used to store internal server process information. : # Not all architectures require this. But if yours does (you'll know because : # this file will be created when you run Apache) then you *must* ensure that : # no two invocations of Apache share the same scoreboard file. : # : ScoreBoardFile /var/run/httpd.scoreboard : : # : # In the standard configuration, the server will process this file, : # srm.conf, and access.conf in that order. The latter two files are : # now distributed empty, as it is recommended that all directives : # be kept in a single file for simplicity. The commented-out values : # below are the built-in defaults. You can have the server ignore : # these files altogether by using "/dev/null" (for Unix) or : # "nul" (for Win32) for the arguments to the directives. : # : #ResourceConfig conf/srm.conf : #AccessConfig conf/access.conf : : # : # Timeout: The number of seconds before receives and sends time out. : # : Timeout 300 : : # : # KeepAlive: Whether or not to allow persistent connections (more than : # one request per connection). Set to "Off" to deactivate. : # : KeepAlive On : : # : # MaxKeepAliveRequests: The maximum number of requests to allow : # during a persistent connection. Set to 0 to allow an unlimited amount. : # We recommend you leave this number high, for maximum performance. : # : MaxKeepAliveRequests 100 : : # : # KeepAliveTimeout: Number of seconds to wait for the next request from the : # same client on the same connection. : # : KeepAliveTimeout 15 : : # : # Server-pool size regulation. Rather than making you guess how many : # server processes you need, Apache dynamically adapts to the load it : # sees --- that is, it tries to maintain enough server processes to : # handle the current load, plus a few spare servers to handle transient : # load spikes (e.g., multiple simultaneous requests from a single : # Netscape browser). : # : # It does this by periodically checking how many servers are waiting : # for a request. If there are fewer than MinSpareServers, it creates : # a new spare. If there are more than MaxSpareServers, some of the : # spares die off. The default values are probably OK for most sites. : # : MinSpareServers 5 : MaxSpareServers 20 : : # : # Number of servers to start initially --- should be a reasonable ballpark : # figure. : # : StartServers 8 : : # : # Limit on total number of servers running, i.e., limit on the number : # of clients who can simultaneously connect --- if this limit is ever : # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. : # It is intended mainly as a brake to keep a runaway server from taking : # the system with it as it spirals down... : # : MaxClients 150 : : # : # MaxRequestsPerChild: the number of requests each child process is : # allowed to process before the child dies. The child will exit so : # as to avoid problems after prolonged use when Apache (and maybe the : # libraries it uses) leak memory or other resources. On most systems, this : # isn't really needed, but a few (such as Solaris) do have notable leaks : # in the libraries. For these platforms, set to something like 10000 : # or so; a setting of 0 means unlimited. : # : # NOTE: This value does not include keepalive requests after the initial : # request per connection. For example, if a child process handles : # an initial request and 10 subsequent "keptalive" requests, it : # would only count as 1 request towards this limit. : # : MaxRequestsPerChild 100 : : # : # Listen: Allows you to bind Apache to specific IP addresses and/or : # ports, in addition to the default. See also the <VirtualHost> : # directive. : # : #Listen 3000 : #Listen 12.34.56.78:80 : : # : # BindAddress: You can support virtual hosts with this option. This directive : # is used to tell the server which IP address to listen to. It can either : # contain "*", an IP address, or a fully qualified Internet domain name. : # See also the <VirtualHost> and Listen directives. : # : #BindAddress * : : # : # Dynamic Shared Object (DSO) Support : # : # To be able to use the functionality of a module which was built as a DSO you : # have to place corresponding `LoadModule' lines at this location so the : # directives contained in it are actually available _before_ they are used. : # Please read the file README.DSO in the Apache 1.3 distribution for more : # details about the DSO mechanism and run `httpd -l' for the list of already : # built-in (statically linked and thus always available) modules in your httpd : # binary. : # : # Note: The order is which modules are loaded is important. Don't change : # the order below without expert advice. : # : # Example: : # LoadModule foo_module modules/mod_foo.so : #LoadModule mmap_static_module modules/mod_mmap_static.so : LoadModule vhost_alias_module modules/mod_vhost_alias.so : LoadModule env_module modules/mod_env.so : LoadModule config_log_module modules/mod_log_config.so : LoadModule agent_log_module modules/mod_log_agent.so : LoadModule referer_log_module modules/mod_log_referer.so : #LoadModule mime_magic_module modules/mod_mime_magic.so : LoadModule mime_module modules/mod_mime.so : LoadModule negotiation_module modules/mod_negotiation.so : LoadModule status_module modules/mod_status.so : LoadModule info_module modules/mod_info.so : LoadModule includes_module modules/mod_include.so : LoadModule autoindex_module modules/mod_autoindex.so : LoadModule dir_module modules/mod_dir.so : LoadModule cgi_module modules/mod_cgi.so : LoadModule asis_module modules/mod_asis.so : LoadModule imap_module modules/mod_imap.so : LoadModule action_module modules/mod_actions.so : #LoadModule speling_module modules/mod_speling.so : LoadModule userdir_module modules/mod_userdir.so : LoadModule alias_module modules/mod_alias.so : LoadModule rewrite_module modules/mod_rewrite.so : LoadModule access_module modules/mod_access.so : LoadModule auth_module modules/mod_auth.so : LoadModule anon_auth_module modules/mod_auth_anon.so : LoadModule db_auth_module modules/mod_auth_db.so : LoadModule digest_module modules/mod_digest.so : LoadModule proxy_module modules/libproxy.so : #LoadModule cern_meta_module modules/mod_cern_meta.so : LoadModule expires_module modules/mod_expires.so : LoadModule headers_module modules/mod_headers.so : LoadModule usertrack_module modules/mod_usertrack.so : #LoadModule example_module modules/mod_example.so : #LoadModule unique_id_module modules/mod_unique_id.so : LoadModule setenvif_module modules/mod_setenvif.so : #LoadModule bandwidth_module modules/mod_bandwidth.so : #LoadModule put_module modules/mod_put.so : : # Extra Modules : LoadModule perl_module modules/libperl.so : #LoadModule php_module modules/mod_php.so : LoadModule php3_module modules/libphp3.so : : # Reconstruction of the complete module list from all available modules : # (static and shared ones) to achieve correct module execution order. : # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] : ClearModuleList : #AddModule mod_mmap_static.c : AddModule mod_vhost_alias.c : AddModule mod_env.c : AddModule mod_log_config.c : AddModule mod_log_agent.c : AddModule mod_log_referer.c : #AddModule mod_mime_magic.c : AddModule mod_mime.c : AddModule mod_negotiation.c : AddModule mod_status.c : AddModule mod_info.c : AddModule mod_include.c : AddModule mod_autoindex.c : AddModule mod_dir.c : AddModule mod_cgi.c : AddModule mod_asis.c : AddModule mod_imap.c : AddModule mod_actions.c : #AddModule mod_speling.c : AddModule mod_userdir.c : AddModule mod_alias.c : AddModule mod_rewrite.c : AddModule mod_access.c : AddModule mod_auth.c : AddModule mod_auth_anon.c : AddModule mod_auth_db.c : AddModule mod_digest.c : AddModule mod_proxy.c : #AddModule mod_cern_meta.c : AddModule mod_expires.c : AddModule mod_headers.c : AddModule mod_usertrack.c : #AddModule mod_example.c : #AddModule mod_unique_id.c : AddModule mod_so.c : AddModule mod_setenvif.c : #AddModule mod_bandwidth.c : #AddModule mod_put.c : : # Extra Modules : AddModule mod_perl.c : #AddModule mod_php.c : AddModule mod_php3.c : : # : # ExtendedStatus: controls whether Apache will generate "full" status : # information (ExtendedStatus On) or just basic information (ExtendedStatus : # Off) when the "server-status" handler is called. The default is Off. : # : #ExtendedStatus On : : ### Section 2: 'Main' server configuration : # : # The directives in this section set up the values used by the 'main' : # server, which responds to any requests that aren't handled by a : # <VirtualHost> definition. These values also provide defaults for : # any <VirtualHost> containers you may define later in the file. : # : # All of these directives may appear inside <VirtualHost> containers, : # in which case these default settings will be overridden for the : # virtual host being defined. : # : : # : # If your ServerType directive (set earlier in the 'Global Environment' : # section) is set to "inetd", the next few directives don't have any : # effect since their settings are defined by the inetd configuration. : # Skip ahead to the ServerAdmin directive. : # : : # : # Port: The port to which the standalone server listens. For : # ports < 1023, you will need httpd to be run as root initially. : # : Port 80 : : # : # If you wish httpd to run as a different user or group, you must run : # httpd as root initially and it will switch. : # : # User/Group: The name (or #number) of the user/group to run httpd as. : # . On SCO (ODT 3) use "User nouser" and "Group nogroup". : # . On HPUX you may not be able to use shared memory as nobody, and the : # suggested workaround is to create a user www and use that user. : # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) : # when the value of (unsigned)Group is above 60000; : # don't use Group nobody on these systems! : # : User nobody : Group nobody : : # : # ServerAdmin: Your address, where problems with the server should be : # e-mailed. This address appears on some server-generated pages, such : # as error documents. : # : ServerAdmin root@localhost : : # : # ServerName: allows you to set a host name which is sent back to clients for : # your server if it's different than the one the program would get (i.e., use : # "www" instead of the host's real name). : # : # Note: You cannot just invent host names and hope they work. The name you : # define here must be a valid DNS name for your host. If you don't understand : # this, ask your network administrator. : # If your host doesn't have a registered DNS name, enter its IP address here. : # You will have to access it by its address (e.g., http://123.45.67.89/) : # anyway, and this will make redirections work in a sensible way. : # : ServerName xxx.xxx.xxx.xxx : # : # DocumentRoot: The directory out of which you will serve your : # documents. By default, all requests are taken from this directory, but : # symbolic links and aliases may be used to point to other locations. : # : DocumentRoot "/home/httpd/html" : : # : # Each directory to which Apache has access, can be configured with respect : # to which services and features are allowed and/or disabled in that : # directory (and its subdirectories). : # : # First, we configure the "default" to be a very restrictive set of : # permissions. : # : <Directory /> : Options FollowSymLinks : AllowOverride None : </Directory> : : # : # Note that from this point forward you must specifically allow : # particular features to be enabled - so if something's not working as : # you might expect, make sure that you have specifically enabled it : # below. : # : : # : # This should be changed to whatever you set DocumentRoot to. : # : <Directory "/home/httpd/html"> : : # : # This may also be "None", "All", or any combination of "Indexes", : # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". : # : # Note that "MultiViews" must be named *explicitly* --- "Options All" : # doesn't give it to you. : # : Options Indexes Includes FollowSymLinks : : # : # This controls which options the .htaccess files in directories can : # override. Can also be "All", or any combination of "Options", "FileInfo", : # "AuthConfig", and "Limit" : # : AllowOverride None : : # : # Controls who can get stuff from this server. : # : Order allow,deny : Allow from all : # 학수의 변경 부분 : Options ExecCGI : </Directory> : : # : # UserDir: The name of the directory which is appended onto a user's home : # directory if a ~user request is received. : # : UserDir public_html : : # : # Control access to UserDir directories. The following is an example : # for a site where these directories are restricted to read-only. : # : #<Directory /home/*/public_html> : # AllowOverride FileInfo AuthConfig Limit : # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec : # <Limit GET POST OPTIONS PROPFIND> : # Order allow,deny : # Allow from all : # </Limit> : # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK> : # Order deny,allow : # Deny from all : # </Limit> : #</Directory> : : # : # DirectoryIndex: Name of the file or files to use as a pre-written HTML : # directory index. Separate multiple entries with spaces. : # : DirectoryIndex index.html index.htm index.shtml index.cgi : : # : # AccessFileName: The name of the file to look for in each directory : # for access control information. : # : AccessFileName .htaccess : : # : # The following lines prevent .htaccess files from being viewed by : # Web clients. Since .htaccess files often contain authorization : # information, access is disallowed for security reasons. Comment : # these lines out if you want Web visitors to see the contents of : # .htaccess files. If you change the AccessFileName directive above, : # be sure to make the corresponding changes here. : # : # Also, folks tend to use names such as .htpasswd for password : # files, so this will protect those as well. : # : <Files ~ "^.ht"> : Order allow,deny : Deny from all : </Files> : : # : # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each : # document that was negotiated on the basis of content. This asks proxy : # servers not to cache the document. Uncommenting the following line disables : # this behavior, and proxies will be allowed to cache the documents. : # : #CacheNegotiatedDocs : : # : # UseCanonicalName: (new for 1.3) With this setting turned on, whenever : # Apache needs to construct a self-referencing URL (a URL that refers back : # to the server the response is coming from) it will use ServerName and : # Port to form a "canonical" name. With this setting off, Apache will : # use the hostname:port that the client supplied, when possible. This : # also affects SERVER_NAME and SERVER_PORT in CGI scripts. : # : UseCanonicalName On : : # : # TypesConfig describes where the mime.types file (or equivalent) is : # to be found. : # : TypesConfig /etc/mime.types : : # : # DefaultType is the default MIME type the server will use for a document : # if it cannot otherwise determine one, such as from filename extensions. : # If your server contains mostly text or HTML documents, "text/plain" is : # a good value. If most of your content is binary, such as applications : # or images, you may want to use "application/octet-stream" instead to : # keep browsers from trying to display binary files as though they are : # text. : # : DefaultType text/plain : : # : # The mod_mime_magic module allows the server to use various hints from the : # contents of the file itself to determine its type. The MIMEMagicFile : # directive tells the module where the hint definitions are located. : # mod_mime_magic is not part of the default server (you have to add : # it yourself with a LoadModule [see the DSO paragraph in the 'Global : # Environment' section], or recompile the server and include mod_mime_magic : # as part of the configuration), so it's enclosed in an <IfModule> container. : # This means that the MIMEMagicFile directive will only be processed if the : # module is part of the server. : # : <IfModule mod_mime_magic.c> : MIMEMagicFile share/magic : </IfModule> : : # : # HostnameLookups: Log the names of clients or just their IP addresses : # e.g., www.apache.org (on) or 204.62.129.132 (off). : # The default is off because it'd be overall better for the net if people : # had to knowingly turn this feature on, since enabling it means that : # each client request will result in AT LEAST one lookup request to the : # nameserver. : # : HostnameLookups Off : : # : # ErrorLog: The location of the error log file. : # If you do not specify an ErrorLog directive within a <VirtualHost> : # container, error messages relating to that virtual host will be : # logged here. If you *do* define an error logfile for a <VirtualHost> : # container, that host's errors will be logged there and not here. : # : ErrorLog /var/log/httpd/error_log : : # : # LogLevel: Control the number of messages logged to the error_log. : # Possible values include: debug, info, notice, warn, error, crit, : # alert, emerg. : # : LogLevel warn : : # : # The following directives define some format nicknames for use with : # a CustomLog directive (see below). : # : LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined : LogFormat "%h %l %u %t "%r" %>s %b" common : LogFormat "%{Referer}i -> %U" referer : LogFormat "%{User-agent}i" agent : : # : # The location and format of the access logfile (Common Logfile Format). : # If you do not define any access logfiles within a <VirtualHost> : # container, they will be logged here. Contrariwise, if you *do* : # define per-<VirtualHost> access logfiles, transactions will be : # logged therein and *not* in this file. : # : CustomLog /var/log/httpd/access_log common : : # : # If you would like to have agent and referer logfiles, uncomment the : # following directives. : # : #CustomLog /var/log/httpd/referer_log referer : #CustomLog /var/log/httpd/agent_log agent : : # : # If you prefer a single logfile with access, agent, and referer information : # (Combined Logfile Format) you can use the following directive. : # : #CustomLog /var/log/httpd/access_log combined : : # : # Optionally add a line containing the server version and virtual host : # name to server-generated pages (error documents, FTP directory listings, : # mod_status and mod_info output etc., but not CGI generated documents). : # Set to "EMail" to also include a mailto: link to the ServerAdmin. : # Set to one of: On | Off | EMail : # : ServerSignature On : : # : # Aliases: Add here as many aliases as you need (with no limit). The format is : # Alias fakename realname : # : # Note that if you include a trailing / on fakename then the server will : # require it to be present in the URL. So "/icons" isn't aliased in this : # example, only "/icons/".. : # : Alias /icons/ "/home/httpd/icons/" : : <Directory "/home/httpd/icons"> : Options Indexes MultiViews : AllowOverride None : Order allow,deny : Allow from all : </Directory> : : # : # ScriptAlias: This controls which directories contain server scripts. : # ScriptAliases are essentially the same as Aliases, except that : # documents in the realname directory are treated as applications and : # run by the server when requested rather than as documents sent to the client. : # The same rules about trailing "/" apply to ScriptAlias directives as to : # Alias. : # : ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/" : : : # : # "/home/httpd/cgi-bin" should be changed to whatever your ScriptAliased : # CGI directory exists, if you have that configured. : # : <Directory "/home/httpd/cgi-bin"> : # 학수가 수정한 부분 1줄 : Options FollowSymLinks Includes ExecCGI : AllowOverride None : Options ExecCGI : Order allow,deny : Allow from all : </Directory> : : # : # Redirect allows you to tell clients about documents which used to exist in : # your server's namespace, but do not anymore. This allows you to tell the : # clients where to look for the relocated document. : # Format: Redirect old-URI new-URL : # : : # : # Directives controlling the display of server-generated directory listings. : # : : # : # FancyIndexing: whether you want fancy directory indexing or standard : # : IndexOptions FancyIndexing : : # : # AddIcon* directives tell the server which icon to show for different : # files or filename extensions. These are only displayed for : # FancyIndexed directories. : # : AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip : : AddIconByType (TXT,/icons/text.gif) text/* : AddIconByType (IMG,/icons/image2.gif) image/* : AddIconByType (SND,/icons/sound2.gif) audio/* : AddIconByType (VID,/icons/movie.gif) video/* : : AddIcon /icons/binary.gif .bin .exe : AddIcon /icons/binhex.gif .hqx : AddIcon /icons/tar.gif .tar : AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv : AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip : AddIcon /icons/a.gif .ps .ai .eps : AddIcon /icons/layout.gif .html .shtml .htm .pdf : AddIcon /icons/text.gif .txt : AddIcon /icons/c.gif .c : AddIcon /icons/p.gif .pl .py : AddIcon /icons/f.gif .for : AddIcon /icons/dvi.gif .dvi : AddIcon /icons/uuencoded.gif .uu : AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl : AddIcon /icons/tex.gif .tex : AddIcon /icons/bomb.gif core : : AddIcon /icons/back.gif .. : AddIcon /icons/hand.right.gif README : AddIcon /icons/folder.gif ^^DIRECTORY^^ : AddIcon /icons/blank.gif ^^BLANKICON^^ : : # : # DefaultIcon: which icon to show for files which do not have an icon : # explicitly set. : # : DefaultIcon /icons/unknown.gif : : # : # AddDescription: allows you to place a short description after a file in : # server-generated indexes. These are only displayed for FancyIndexed : # directories. : # Format: AddDescription "description" filename : # : #AddDescription "GZIP compressed document" .gz : #AddDescription "tar archive" .tar : #AddDescription "GZIP compressed tar archive" .tgz : : # : # ReadmeName: the name of the README file the server will look for by : # default, and append to directory listings. : # : # HeaderName: the name of a file which should be prepended to : # directory indexes. : # : # The server will first look for name.html and include it if found. : # If name.html doesn't exist, the server will then look for name.txt : # and include it as plaintext if found. : # : ReadmeName README : HeaderName HEADER : : # : # IndexIgnore: a set of filenames which directory indexing should ignore : # and not include in the listing. Shell-style wildcarding is permitted. : # : IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t : : # : # AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress : # information on the fly. Note: Not all browsers support this. : # Despite the name similarity, the following Add* directives have nothing : # to do with the FancyIndexing customization directives above. : # : AddEncoding x-compress Z : AddEncoding x-gzip gz tgz : : # : # AddLanguage: allows you to specify the language of a document. You can : # then use content negotiation to give a browser a file in a language : # it can understand. Note that the suffix does not have to be the same : # as the language keyword --- those with documents in Polish (whose : # net-standard language code is pl) may wish to use "AddLanguage pl .po" : # to avoid the ambiguity with the common suffix for perl scripts. : # : AddLanguage en .en : AddLanguage fr .fr : AddLanguage de .de : AddLanguage da .da : AddLanguage el .el : AddLanguage it .it : : # : # LanguagePriority: allows you to give precedence to some languages : # in case of a tie during content negotiation. : # Just list the languages in decreasing order of preference. : # : LanguagePriority en fr de : : # : # AddType: allows you to tweak mime.types without actually editing it, or to : # make certain files to be certain types. : # : # For example, the PHP3 module (not part of the Apache distribution - see : # http://www.php.net) will typically use: : # : <IfModule mod_php3.c> : AddType application/x-httpd-php3 .php3 : AddType application/x-httpd-php3-source .phps : </IfModule> : : # The following is for PHP/FI (PHP2): : <IfModule mod_php.c> : AddType application/x-httpd-php .phtml : </IfModule> : : AddType application/x-tar .tgz : # 학수가 수정한 부분 : AddType application/x-httpd-cgi .cgi : AddType application/x-httpd-cgi .pl : # : # AddHandler: allows you to map certain file extensions to "handlers", : # actions unrelated to filetype. These can be either built into the server : # or added with the Action command (see below) : # : # If you want to use server side includes, or CGI outside : # ScriptAliased directories, uncomment the following lines. : # : # To use CGI scripts: : # : # 학수가 수정한 부분 : AddHandler cgi-script .cgi : : # : # To use server-parsed HTML files : # : AddType text/html .shtml : AddHandler server-parsed .shtml : : # : # Uncomment the following line to enable Apache's send-asis HTTP file : # feature : # : #AddHandler send-as-is asis : : # : # If you wish to use server-parsed imagemap files, use : # : AddHandler imap-file map : : # : # To enable type maps, you might want to use : # : #AddHandler type-map var : : # : # Action: lets you define media types that will execute a script whenever : # a matching file is called. This eliminates the need for repeated URL : # pathnames for oft-used CGI file processors. : # Format: Action media/type /cgi-script/location : # Format: Action handler-name /cgi-script/location : # : : # : # MetaDir: specifies the name of the directory in which Apache can find : # meta information files. These files contain additional HTTP headers : # to include when sending the document : # : #MetaDir .web : : # : # MetaSuffix: specifies the file name suffix for the file containing the : # meta information. : # : #MetaSuffix .meta : : # : # Customizable error response (Apache style) : # these come in three flavors : # : # 1) plain text : #ErrorDocument 500 "The server made a boo boo. : # n.b. the (") marks it as text, it does not get output : # : # 2) local redirects : #ErrorDocument 404 /missing.html : # to redirect to local URL /missing.html : #ErrorDocument 404 /cgi-bin/missing_handler.pl : # N.B.: You can redirect to a script or a document using server-side-includes. : # : # 3) external redirects : #ErrorDocument 402 http://some.other_server.com/subscription_info.html : # N.B.: Many of the environment variables associated with the original : # request will *not* be available to such a script. : : # : # The following directives modify normal HTTP response behavior. : # The first directive disables keepalive for Netscape 2.x and browsers that : # spoof it. There are known problems with these browser implementations. : # The second directive is for Microsoft Internet Explorer 4.0b2 : # which has a broken HTTP/1.1 implementation and does not properly : # support keepalive when it is used on 301 or 302 (redirect) responses. : # : BrowserMatch "Mozilla/2" nokeepalive : BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 : : # : # The following directive disables HTTP/1.1 responses to browsers which : # are in violation of the HTTP/1.0 spec by not being able to grok a : # basic 1.1 response. : # : BrowserMatch "RealPlayer 4.0" force-response-1.0 : BrowserMatch "Java/1.0" force-response-1.0 : BrowserMatch "JDK/1.0" force-response-1.0 : : : # If the perl module is installed, this will be enabled. : <IfModule mod_perl.c> : Alias /perl/ /home/httpd/perl/ : <Location /perl> : SetHandler perl-script : PerlHandler Apache::Registry : Options +ExecCGI : </Location> : </IfModule> : : # : # Allow http put (such as Netscape Gold's publish feature) : # Use htpasswd to generate /etc/httpd/conf/passwd. : # You must unremark these two lines at the top of this file as well: : #LoadModule put_module modules/mod_put.so : #AddModule mod_put.c : # : #Alias /upload /tmp : #<Location /upload> : # EnablePut On : # AuthType Basic : # AuthName Temporary : # AuthUserFile /etc/httpd/conf/passwd : # EnableDelete Off : # umask 007 : # <Limit PUT> : # require valid-user : # </Limit> : #</Location> : : # : # Allow server status reports, with the URL of http://servername/server-status : # Change the ".your_domain.com" to match your domain to enable. : # : #<Location /server-status> : # SetHandler server-status : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : #</Location> : : # : # Allow remote server configuration reports, with the URL of : # http://servername/server-info (requires that mod_info.c be loaded). : # Change the ".your_domain.com" to match your domain to enable. : # : #<Location /server-info> : # SetHandler server-info : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : #</Location> : : # Allow access to local system documentation from localhost : Alias /doc/ /usr/doc/ : <Location /doc> : order deny,allow : deny from all : allow from localhost : Options Indexes FollowSymLinks : </Location> : : # : # There have been reports of people trying to abuse an old bug from pre-1.1 : # days. This bug involved a CGI script distributed as a part of Apache. : # By uncommenting these lines you can redirect these attacks to a logging : # script on phf.apache.org. Or, you can record them yourself, using the script : # support/phf_abuse_log.cgi. : # : #<Location /cgi-bin/phf*> : # Deny from all : # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi : #</Location> : : # : # Proxy Server directives. Uncomment the following lines to : # enable the proxy server: : # : #<IfModule mod_proxy.c> : #ProxyRequests On : # : #<Directory proxy:*> : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : #</Directory> : : # : # Enable/disable the handling of HTTP/1.1 "Via:" headers. : # ("Full" adds the server version; "Block" removes all outgoing Via: headers) : # Set to one of: Off | On | Full | Block : # : #ProxyVia On : : # : # To enable the cache as well, edit and uncomment the following lines: : # (no cacheing without CacheRoot) : # : #CacheRoot "/var/cache/httpd" : #CacheSize 5 : #CacheGcInterval 4 : #CacheMaxExpire 24 : #CacheLastModifiedFactor 0.1 : #CacheDefaultExpire 1 : #NoCache a_domain.com another_domain.edu joes.garage_sale.com : : #</IfModule> : # End of proxy directives. : : ### Section 3: Virtual Hosts : # : # VirtualHost: If you want to maintain multiple domains/hostnames on your : # machine you can setup VirtualHost containers for them. : # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> : # for further details before you try to setup virtual hosts. : # You may use the command line option '-S' to verify your virtual host : # configuration. : : # : # If you want to use name-based virtual hosts you need to define at : # least one IP address (and port number) for them. : # : #NameVirtualHost 12.34.56.78:80 : #NameVirtualHost 12.34.56.78 : : # : # VirtualHost example: : # Almost any Apache directive may go into a VirtualHost container. : # : #<VirtualHost ip.address.of.host.some_domain.com> : # ServerAdmin webmaster@host.some_domain.com : # DocumentRoot /www/docs/host.some_domain.com : # ServerName host.some_domain.com : # ErrorLog logs/host.some_domain.com-error_log : # CustomLog logs/host.some_domain.com-access_log common : #</VirtualHost> : : #<VirtualHost _default_:*> : #</VirtualHost>
Copyleft
1999-2026 by
JSBoard Open Project
Theme Designed by
IDOO
All right reserved