>> Edit article

			이름
			제목
			패스워드

안녕하세요? 음.. 글쌔요.. 저는 각각의 계정 이용자에게 홈페이지를 할당해 주려고 할때 문제가 되었던 부분이었었습니다만... 아마도 비슷한 경우가 아닐까 합니다. 정확히 httpd 에서 ls -l 을 하셨을 경우에 html 디렉토리의 펴미션을 확인해 보세요.. html 디렉토리가 755의 퍼미션을 가지고 있어야 nobody 접속이 이루어 집니다.. 또한 각 계정에 주실 때도 각 계정의 홈 디렉토리 역시 마찬가지로 수정 되어야만 엑세스가 가능합니다. 한번 확인해 보실길.... : 리눅서님들 안녕하시져.. : allix linux 6.2를 설치하고 : 아파치 데몬은 그냥 깔리는데로 : 살펴보니까 1.3.11이던데여 : httpd.conf에서 : : doccumentroot "/hoem/httpd/html" : : 이라구 셋팅!!! : : 퍼미션두 다 살펴 보았지만 이상 없는데 : 브라우져로 접속하면 : : Forbidden : You don&#039;t have permission to access / on this server. : ----------------------------------------- : Apache/1.3.11 Server at taxnews Port 80 : : 음음 게시판엔 퍼미션예기들만 하는데.. 그거 이상은 없거든요 : 하두 답답해서 home전체를 777로 걸어보기두 하구 : 이젠 거의 포기상태 입니다. : : 지금은 1.3.14버전을 다운 받고 새로 설치하려 생각 중입니다. : 문제가 있다면 httpd.conf화일 일꺼 같은데.. : httpd -t로 체크해도 이상은 없고. : : 다른 (잘돌아가고 있는)서버의 httpd.conf과도 비교 해 봤지만 : 어디가문제인지 모르겠네여... : : 아시는 분들... 누군가에게 도움이 될수 있도로 .... : : =================================================================== : : # # : # # httpd.conf -- Apache HTTP server configuration file : # # : : : # Based upon the NCSA server configuration files originally by Rob : McCool. : : # This is the main Apache server configuration file.  It contains the : # configuration directives that give the server its instructions. : # See <URL:http://www.apache.org/docs/> for detailed information about : # the directives. : : # Do NOT simply read the instructions in here without understanding : # what they do.  They&#039;re here only as hints or reminders.  If you are : unsure : # consult the online docs. You have been warned. : : # After this file is processed, the server will look for and process : # /usr/conf/srm.conf and then /usr/conf/access.conf : # unless you have overridden these with ResourceConfig and/or : # AccessConfig directives here. : : # The configuration directives are grouped into three basic sections: : # 1. Directives that control the operation of the Apache server : process as a : # whole (the &#039;global environment&#039;). : # 2. Directives that define the parameters of the &#039;main&#039; or &#039;default&#039; : server, : # which responds to requests that aren&#039;t handled by a virtual host. : # These directives also provide default values for the settings : # of all virtual hosts. : # 3. Settings for virtual hosts, which allow Web requests to be sent to : # different IP addresses or hostnames and have them handled by the : # same Apache server process. : : # Configuration and logfile names: If the filenames you specify for : many : # of the server&#039;s control files begin with "/" (or "drive:/" for : Win32), the : # server will use that explicit path.  If the filenames do *not* begin : # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" : # with ServerRoot set to "/usr/local/apache" will be interpreted by the : # server as "/usr/local/apache/logs/foo.log". : : : # ## Section 1: Global Environment : : # The directives in this section affect the overall operation of : Apache, : # such as the number of concurrent requests it can handle or where it : # can find its configuration files. : : : : # ServerType is either inetd, or standalone.  Inetd mode is only : supported on : # Unix platforms. : : ServerType standalone : # AddModule mod_perl.c : : : # ExtendedStatus: controls whether Apache will generate "full" status : # information (ExtendedStatus On) or just basic information : (ExtendedStatus : # Off) when the "server-status" handler is called. The default is Off. : : # ExtendedStatus On : : # ## Section 2: &#039;Main&#039; server configuration : : # The directives in this section set up the values used by the &#039;main&#039; : # server, which responds to any requests that aren&#039;t handled by a : # <VirtualHost> definition.  These values also provide defaults for : # any <VirtualHost> containers you may define later in the file. : : # All of these directives may appear inside <VirtualHost> containers, : # in which case these default settings will be overridden for the : # virtual host being defined. : : : : # If your ServerType directive (set earlier in the &#039;Global Environment&#039; : # section) is set to "inetd", the next few directives don&#039;t have any : # effect since their settings are defined by the inetd configuration. : # Skip ahead to the ServerAdmin directive. : : : : # Port: The port to which the standalone server listens. For : # ports < 1023, you will need httpd to be run as root initially. : : Port 80 : : : # Number of servers to start initially --- should be a reasonable : ballpark : # figure. : : StartServers 8 : : : # Server-pool size regulation.  Rather than making you guess how many : # server processes you need, Apache dynamically adapts to the load it : # sees --- that is, it tries to maintain enough server processes to : # handle the current load, plus a few spare servers to handle transient : # load spikes (e.g., multiple simultaneous requests from a single : # Netscape browser). : : # It does this by periodically checking how many servers are waiting : # for a request.  If there are fewer than MinSpareServers, it creates : # a new spare.  If there are more than MaxSpareServers, some of the : # spares die off.  The default values are probably OK for most sites. : : MinSpareServers 5 : MaxSpareServers 20 : : : # KeepAliveTimeout: Number of seconds to wait for the next request : from the : # same client on the same connection. : : MaxKeepAliveRequests 100 : : : # MaxKeepAliveRequests: The maximum number of requests to allow : # during a persistent connection. Set to 0 to allow an unlimited : amount. : # We recommend you leave this number high, for maximum performance. : : KeepAliveTimeout 15 : : : # Limit on total number of servers running, i.e., limit on the number : # of clients who can simultaneously connect --- if this limit is ever : # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. : # It is intended mainly as a brake to keep a runaway server from taking : # the system with it as it spirals down... : : MaxClients 150 : : : # MaxRequestsPerChild: the number of requests each child process is : # allowed to process before the child dies.  The child will exit so : # as to avoid problems after prolonged use when Apache (and maybe the : # libraries it uses) leak memory or other resources.  On most systems, : this : # isn&#039;t really needed, but a few (such as Solaris) do have notable : leaks : # in the libraries. For these platforms, set to something like 10000 : # or so; a setting of 0 means unlimited. : : # NOTE: This value does not include keepalive requests after the : initial : # request per connection. For example, if a child process handles : # an initial request and 10 subsequent "keptalive" requests, it : # would only count as 1 request towards this limit. : : MaxRequestsPerChild 100 : : : # PidFile: The file in which the server should record its process : # identification number when it starts. : : PidFile /var/run/httpd.pid : : : # In the standard configuration, the server will process this file, : # srm.conf, and access.conf in that order.  The latter two files are : # now distributed empty, as it is recommended that all directives : # be kept in a single file for simplicity.  The commented-out values : # below are the built-in defaults.  You can have the server ignore : # these files altogether by using "/dev/null" (for Unix) or : # "nul" (for Win32) for the arguments to the directives. : : # ResourceConfig conf/srm.conf : # AccessConfig conf/access.conf : : : # Timeout: The number of seconds before receives and sends time out. : : Timeout 300 : : : # ScoreBoardFile: File used to store internal server process : information. : # Not all architectures require this.  But if yours does (you&#039;ll know : because : # this file will be  created when you run Apache) then you *must* : ensure that : # no two invocations of Apache share the same scoreboard file. : : ScoreBoardFile /var/run/httpd.scoreboard : : : # ServerRoot: The top of the directory tree under which the server&#039;s : # configuration, error, and log files are kept. : : # NOTE!  If you intend to place this on an NFS (or otherwise network) : # mounted filesystem then please read the LockFile documentation : # (available at : <URL:http://www.apache.org/docs/mod/core.html#lockfile>); : # you will save yourself a lot of trouble. : : # Do NOT add a slash at the end of the directory path. : : ServerRoot "/etc/httpd" : : : # HostnameLookups: Log the names of clients or just their IP addresses : # e.g., www.apache.org (on) or 204.62.129.132 (off). : # The default is off because it&#039;d be overall better for the net if : people : # had to knowingly turn this feature on, since enabling it means that : # each client request will result in AT LEAST one lookup request to the : # nameserver. : : HostnameLookups off : : : # Listen: Allows you to bind Apache to specific IP addresses and/or : # ports, in addition to the default. See also the <VirtualHost> : # directive. : : # Listen 3000 : # Listen 12.34.56.78:80 : : : # BindAddress: You can support virtual hosts with this option. This : directive : # is used to tell the server which IP address to listen to. It can : either : # contain "*", an IP address, or a fully qualified Internet domain : name. : # See also the <VirtualHost> and Listen directives. : : # BindAddress * : : : # Dynamic Shared Object (DSO) Support : : # To be able to use the functionality of a module which was built as a : DSO you : # have to place corresponding `LoadModule&#039; lines at this location so : the : # directives contained in it are actually available _before_ they are : used. : # Please read the file README.DSO in the Apache 1.3 distribution for : more : # details about the DSO mechanism and run `httpd -l&#039; for the list of : already : # built-in (statically linked and thus always available) modules in : your httpd : # binary. : : # Note: The order is which modules are loaded is important.  Don&#039;t : change : # the order below without expert advice. : : # Example: : # LoadModule foo_module modules/mod_foo.so : # LoadModule mmap_static_module modules/mod_mmap_static.so : LoadModule vhost_alias_module modules/mod_vhost_alias.so : LoadModule env_module        modules/mod_env.so : LoadModule config_log_module  modules/mod_log_config.so : LoadModule agent_log_module  modules/mod_log_agent.so : LoadModule referer_log_module modules/mod_log_referer.so : # LoadModule mime_magic_module  modules/mod_mime_magic.so : LoadModule mime_module        modules/mod_mime.so : LoadModule negotiation_module modules/mod_negotiation.so : LoadModule status_module      modules/mod_status.so : LoadModule info_module        modules/mod_info.so : LoadModule includes_module    modules/mod_include.so : LoadModule autoindex_module  modules/mod_autoindex.so : LoadModule dir_module        modules/mod_dir.so : LoadModule cgi_module        modules/mod_cgi.so : LoadModule asis_module        modules/mod_asis.so : LoadModule imap_module        modules/mod_imap.so : LoadModule action_module      modules/mod_actions.so : # LoadModule speling_module    modules/mod_speling.so : LoadModule userdir_module    modules/mod_userdir.so : LoadModule alias_module      modules/mod_alias.so : LoadModule rewrite_module    modules/mod_rewrite.so : LoadModule access_module      modules/mod_access.so : LoadModule auth_module        modules/mod_auth.so : LoadModule anon_auth_module  modules/mod_auth_anon.so : LoadModule db_auth_module    modules/mod_auth_db.so : LoadModule digest_module      modules/mod_digest.so : LoadModule proxy_module      modules/libproxy.so : # LoadModule cern_meta_module  modules/mod_cern_meta.so : LoadModule expires_module    modules/mod_expires.so : LoadModule headers_module    modules/mod_headers.so : LoadModule usertrack_module  modules/mod_usertrack.so : # LoadModule example_module    modules/mod_example.so : # LoadModule unique_id_module  modules/mod_unique_id.so : LoadModule setenvif_module    modules/mod_setenvif.so : # LoadModule bandwidth_module  modules/mod_bandwidth.so : # LoadModule put_module modules/mod_put.so : : # Extra Modules : # LoadModule php_module        modules/mod_php.so : LoadModule php3_module        modules/libphp3.so : ClearModuleList : # LoadModule perl_module        modules/libperl.so : : # Reconstruction of the complete module list from all available modules : # (static and shared ones) to achieve correct module execution order. : # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] : # AddModule mod_mmap_static.c : AddModule mod_vhost_alias.c : AddModule mod_env.c : AddModule mod_log_config.c : AddModule mod_log_agent.c : AddModule mod_log_referer.c : # AddModule mod_mime_magic.c : AddModule mod_mime.c : AddModule mod_negotiation.c : AddModule mod_status.c : AddModule mod_info.c : AddModule mod_include.c : AddModule mod_autoindex.c : AddModule mod_dir.c : AddModule mod_cgi.c : AddModule mod_asis.c : AddModule mod_imap.c : AddModule mod_actions.c : # AddModule mod_speling.c : AddModule mod_userdir.c : AddModule mod_alias.c : AddModule mod_rewrite.c : AddModule mod_access.c : AddModule mod_auth.c : AddModule mod_auth_anon.c : AddModule mod_auth_db.c : AddModule mod_digest.c : AddModule mod_proxy.c : # AddModule mod_cern_meta.c : AddModule mod_expires.c : AddModule mod_headers.c : AddModule mod_usertrack.c : # AddModule mod_example.c : # AddModule mod_unique_id.c : AddModule mod_so.c : AddModule mod_setenvif.c : # AddModule mod_bandwidth.c : # AddModule mod_put.c : : # Extra Modules : # AddModule mod_php.c : AddModule mod_php3.c : : : # ServerAdmin: Your address, where problems with the server should be : # e-mailed.  This address appears on some server-generated pages, such : # as error documents. : : ServerAdmin root@localhost : NameVirtualHost 211.116.237.199 : ServerName taxnews : : : # ServerName: allows you to set a host name which is sent back to : clients for : # your server if it&#039;s different than the one the program would get : (i.e., use : # "www" instead of the host&#039;s real name). : : # Note: You cannot just invent host names and hope they work. The name : you : # define here must be a valid DNS name for your host. If you don&#039;t : understand : # this, ask your network administrator. : # If your host doesn&#039;t have a registered DNS name, enter its IP : address here. : # You will have to access it by its address (e.g., : http://123.45.67.89/) : # anyway, and this will make redirections work in a sensible way. : : # ServerName localhost : : : # DocumentRoot: The directory out of which you will serve your : # documents. By default, all requests are taken from this directory, : but : # symbolic links and aliases may be used to point to other locations. : : DocumentRoot "/home/httpd/html" : : : # ErrorLog: The location of the error log file. : # If you do not specify an ErrorLog directive within a <VirtualHost> : # container, error messages relating to that virtual host will be : # logged here.  If you *do* define an error logfile for a <VirtualHost> : # container, that host&#039;s errors will be logged there and not here. : : ErrorLog /var/log/httpd/error_log : : : # ScriptAlias: This controls which directories contain server scripts. : # ScriptAliases are essentially the same as Aliases, except that : # documents in the realname directory are treated as applications and : # run by the server when requested rather than as documents sent to : the client. : # The same rules about trailing "/" apply to ScriptAlias directives as : to : # Alias. : : ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/" : : : # If you wish httpd to run as a different user or group, you must run : # httpd as root initially and it will switch. : : # User/Group: The name (or #number) of the user/group to run httpd as. : # . On SCO (ODT 3) use "User nouser" and "Group nogroup". : # . On HPUX you may not be able to use shared memory as nobody, and the : # suggested workaround is to create a user www and use that user. : # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) : # when the value of (unsigned)Group is above 60000; : # don&#039;t use Group nobody on these systems! : : User nobody : Group nobody : <IfModule mod_mime_magic.c> :    MIMEMagicFile share/magic : </IfModule> : : <IfModule mod_perl.c> :  Alias /perl/ /home/httpd/perl/ :  <Location /perl> :    SetHandler perl-script :    PerlHandler Apache::Registry :    Options +ExecCGI :  </Location> : </IfModule> : : <Location /doc> :  order deny,allow :  deny from all :  allow from localhost :  Options Indexes FollowSymLinks : </Location> : : : : # The LockFile directive sets the path to the lockfile used when Apache : # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or : # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left : at : # its default value. The main reason for changing it is if the logs : # directory is NFS mounted, since the lockfile MUST BE STORED ON A : LOCAL : # DISK. The PID of the main server process is automatically appended to : # the filename. : : LockFile /var/lock/httpd.lock : : : # UserDir: The name of the directory which is appended onto a user&#039;s : home : # directory if a ~user request is received. : : UserDir public_html : : : # Control access to UserDir directories.  The following is an example : # for a site where these directories are restricted to read-only. : : # <Directory /home/*/public_html> : # AllowOverride FileInfo AuthConfig Limit : # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec : # <Limit GET POST OPTIONS PROPFIND> : # Order allow,deny : # Allow from all : # </Limit> : # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK> : # Order deny,allow : # Deny from all : # </Limit> : # </Directory> : : : # DirectoryIndex: Name of the file or files to use as a pre-written : HTML : # directory index.  Separate multiple entries with spaces. : : DirectoryIndex index.html index.htm index.shtml index.cgi : : : # AccessFileName: The name of the file to look for in each directory : # for access control information. : : AccessFileName .htaccess : : : # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" : with each : # document that was negotiated on the basis of content. This asks proxy : # servers not to cache the document. Uncommenting the following line : disables : # this behavior, and proxies will be allowed to cache the documents. : : # CacheNegotiatedDocs : : : # UseCanonicalName:  (new for 1.3)  With this setting turned on, : whenever : # Apache needs to construct a self-referencing URL (a URL that refers : back : # to the server the response is coming from) it will use ServerName and : # Port to form a "canonical" name.  With this setting off, Apache will : # use the hostname:port that the client supplied, when possible.  This : # also affects SERVER_NAME and SERVER_PORT in CGI scripts. : : UseCanonicalName On : : : # TypesConfig describes where the mime.types file (or equivalent) is : # to be found. : : TypesConfig /etc/mime.types : : : # DefaultType is the default MIME type the server will use for a : document : # if it cannot otherwise determine one, such as from filename : extensions. : # If your server contains mostly text or HTML documents, "text/plain" : is : # a good value.  If most of your content is binary, such as : applications : # or images, you may want to use "application/octet-stream" instead to : # keep browsers from trying to display binary files as though they are : # text. : : DefaultType text/plain : : : # LogLevel: Control the number of messages logged to the error_log. : # Possible values include: debug, info, notice, warn, error, crit, : # alert, emerg. : : LogLevel warn : : : # The following directives define some format nicknames for use with : # a CustomLog directive (see below). : : LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent} : i"" combined : LogFormat "%h %l %u %t "%r" %>s %b" common : LogFormat "%{Referer}i -> %U" referer : LogFormat "%{User-agent}i" agent : : : # The location and format of the access logfile (Common Logfile : Format). : # If you do not define any access logfiles within a <VirtualHost> : # container, they will be logged here.  Contrariwise, if you *do* : # define per-<VirtualHost> access logfiles, transactions will be : # logged therein and *not* in this file. : : CustomLog /var/log/httpd/access_log common : : : # If you would like to have agent and referer logfiles, uncomment the : # following directives. : : # CustomLog /var/log/httpd/referer_log referer : # CustomLog /var/log/httpd/agent_log agent : : : # If you prefer a single logfile with access, agent, and referer : information : # (Combined Logfile Format) you can use the following directive. : : # CustomLog /var/log/httpd/access_log combined : : : # Optionally add a line containing the server version and virtual host : # name to server-generated pages (error documents, FTP directory : listings, : # mod_status and mod_info output etc., but not CGI generated : documents). : # Set to "EMail" to also include a mailto: link to the ServerAdmin. : # Set to one of:  On | Off | EMail : : ServerSignature On : : : # Aliases: Add here as many aliases as you need (with no limit). The : format is : # Alias fakename realname : : # Note that if you include a trailing / on fakename then the server : will : # require it to be present in the URL.  So "/icons" isn&#039;t aliased in : this : # example, only "/icons/".. : : Alias /icons/ "/home/httpd/icons/" : : : # Redirect allows you to tell clients about documents which used to : exist in : # your server&#039;s namespace, but do not anymore. This allows you to tell : the : # clients where to look for the relocated document. : # Format: Redirect old-URI new-URL : : : : # Directives controlling the display of server-generated directory : listings. : : : : # FancyIndexing: whether you want fancy directory indexing or standard : : IndexOptions FancyIndexing : : : # AddIcon* directives tell the server which icon to show for different : # files or filename extensions.  These are only displayed for : # FancyIndexed directories. : : AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip : : AddIconByType (TXT,/icons/text.gif) text/* : AddIconByType (IMG,/icons/image2.gif) image/* : AddIconByType (SND,/icons/sound2.gif) audio/* : AddIconByType (VID,/icons/movie.gif) video/* : : AddIcon /icons/binary.gif .bin .exe : AddIcon /icons/binhex.gif .hqx : AddIcon /icons/tar.gif .tar : AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv : AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip : AddIcon /icons/a.gif .ps .ai .eps : AddIcon /icons/layout.gif .html .shtml .htm .pdf : AddIcon /icons/text.gif .txt : AddIcon /icons/c.gif .c : AddIcon /icons/p.gif .pl .py : AddIcon /icons/f.gif .for : AddIcon /icons/dvi.gif .dvi : AddIcon /icons/uuencoded.gif .uu : AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl : AddIcon /icons/tex.gif .tex : AddIcon /icons/bomb.gif core : : AddIcon /icons/back.gif .. : AddIcon /icons/hand.right.gif README : AddIcon /icons/folder.gif ^^DIRECTORY^^ : AddIcon /icons/blank.gif ^^BLANKICON^^ : : : # DefaultIcon: which icon to show for files which do not have an icon : # explicitly set. : : DefaultIcon /icons/unknown.gif : : : # AddDescription: allows you to place a short description after a file : in : # server-generated indexes.  These are only displayed for FancyIndexed : # directories. : # Format: AddDescription "description" filename : : # AddDescription "GZIP compressed document" .gz : # AddDescription "tar archive" .tar : # AddDescription "GZIP compressed tar archive" .tgz : : : # ReadmeName: the name of the README file the server will look for by : # default, and append to directory listings. : : # HeaderName: the name of a file which should be prepended to : # directory indexes. : : # The server will first look for name.html and include it if found. : # If name.html doesn&#039;t exist, the server will then look for name.txt : # and include it as plaintext if found. : : ReadmeName README : HeaderName HEADER : : : # IndexIgnore: a set of filenames which directory indexing should : ignore : # and not include in the listing.  Shell-style wildcarding is : permitted. : : IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t : : : # AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) : uncompress : # information on the fly. Note: Not all browsers support this. : # Despite the name similarity, the following Add* directives have : nothing : # to do with the FancyIndexing customization directives above. : : AddEncoding x-compress Z : AddEncoding x-gzip gz tgz : : : # AddLanguage: allows you to specify the language of a document. You : can : # then use content negotiation to give a browser a file in a language : # it can understand.  Note that the suffix does not have to be the same : # as the language keyword --- those with documents in Polish (whose : # net-standard language code is pl) may wish to use "AddLanguage : pl .po" : # to avoid the ambiguity with the common suffix for perl scripts. : : AddLanguage en .en : AddLanguage fr .fr : AddLanguage de .de : AddLanguage da .da : AddLanguage el .el : AddLanguage it .it : : : # LanguagePriority: allows you to give precedence to some languages : # in case of a tie during content negotiation. : # Just list the languages in decreasing order of preference. : : LanguagePriority en fr de : : : # AddType: allows you to tweak mime.types without actually editing it, : or to : # make certain files to be certain types. : : # For example, the PHP3 module (not part of the Apache distribution -   : see : # http://www.php.net) will typically use: : : # AddType application/x-httpd-php3 .php3 : # AddType application/x-httpd-php3-source .phps : # The following is for PHP/FI (PHP2): : # AddType application/x-httpd-php .phtml : : AddType application/x-tar .tgz : : : # AddHandler: allows you to map certain file extensions to "handlers", : # actions unrelated to filetype. These can be either built into the : server : # or added with the Action command (see below) : : # If you want to use server side includes, or CGI outside : # ScriptAliased directories, uncomment the following lines. : : # To use CGI scripts: : : # AddHandler cgi-script .cgi : : : # To use server-parsed HTML files : : AddType text/html .shtml : AddHandler server-parsed .shtml : : : # Uncomment the following line to enable Apache&#039;s send-asis HTTP file : # feature : : # AddHandler send-as-is asis : : : # If you wish to use server-parsed imagemap files, use : : AddHandler imap-file map : : : # To enable type maps, you might want to use : : # AddHandler type-map var : : : # Action: lets you define media types that will execute a script : whenever : # a matching file is called. This eliminates the need for repeated URL : # pathnames for oft-used CGI file processors. : # Format: Action media/type /cgi-script/location : # Format: Action handler-name /cgi-script/location : : : : # MetaDir: specifies the name of the directory in which Apache can find : # meta information files. These files contain additional HTTP headers : # to include when sending the document : : # MetaDir .web : : : # MetaSuffix: specifies the file name suffix for the file containing : the : # meta information. : : # MetaSuffix .meta : : : # Customizable error response (Apache style) : # these come in three flavors : : # 1) plain text : # ErrorDocument 500 "The server made a boo boo. : # n.b.  the (") marks it as text, it does not get output : : # 2) local redirects : # ErrorDocument 404 /missing.html : # to redirect to local URL /missing.html : # ErrorDocument 404 /cgi-bin/missing_handler.pl : # N.B.: You can redirect to a script or a document using server-side- : includes. : : # 3) external redirects : # ErrorDocument 402 http://some.other_server.com/subscription_info.html : # N.B.: Many of the environment variables associated with the original : # request will *not* be available to such a script. : : : # The following directives modify normal HTTP response behavior. : # The first directive disables keepalive for Netscape 2.x and browsers : that : # spoof it. There are known problems with these browser : implementations. : # The second directive is for Microsoft Internet Explorer 4.0b2 : # which has a broken HTTP/1.1 implementation and does not properly : # support keepalive when it is used on 301 or 302 (redirect) responses. : : BrowserMatch "Mozilla/2" nokeepalive : BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response- : 1.0 : : : # The following directive disables HTTP/1.1 responses to browsers which : # are in violation of the HTTP/1.0 spec by not being able to grok a : # basic 1.1 response. : : BrowserMatch "RealPlayer 4.0" force-response-1.0 : BrowserMatch "Java/1.0" force-response-1.0 : BrowserMatch "JDK/1.0" force-response-1.0 : : : # Allow http put (such as Netscape Gold&#039;s publish feature) : # Use htpasswd to generate /etc/httpd/conf/passwd. : # You must unremark these two lines at the top of this file as well: : # LoadModule put_module modules/mod_put.so : # AddModule mod_put.c : : # Alias /upload /tmp : # <Location /upload> : # EnablePut On : # AuthType Basic : # AuthName Temporary : # AuthUserFile /etc/httpd/conf/passwd : # EnableDelete Off : # umask 007 : # <Limit PUT> : # require valid-user : # </Limit> : # </Location> : : : # Allow server status reports, with the URL of : http://servername/server-status : # Change the ".your_domain.com" to match your domain to enable. : : # <Location /server-status> : # SetHandler server-status : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : # </Location> : : : # Allow remote server configuration reports, with the URL of : # http://servername/server-info (requires that mod_info.c be loaded). : # Change the ".your_domain.com" to match your domain to enable. : : # <Location /server-info> : # SetHandler server-info : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : # </Location> : : # Allow access to local system documentation from localhost : Alias /doc/ /usr/doc/ : : <Directory /> : Options FollowSymlinks : </Directory> : : <Directory "/home/httpd/html"> : : : # This may also be "None", "All", or any combination of "Indexes", : # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". : : # Note that "MultiViews" must be named *explicitly* --- "Options All" : # doesn&#039;t give it to you. : : #Options Includes Indexes FollowSymlinks : Options Indexes Includes FollowSymlinks : : # This controls which options the .htaccess files in directories can : # override. Can also be "All", or any combination : of "Options", "FileInfo", : # "AuthConfig", and "Limit" : : : AllowOverride None : : # Controls who can get stuff from this server. : :    Order allow,deny :    Allow from all : </Directory> : : <Files ~> : AllowOverride AuthConfig FileInfo Indexes Limit Options :    Order allow,deny :    Deny from all : </Files> : : <Directory "/home/httpd/icons"> : Options MultiViews Indexes :    Order allow,deny :    Allow from all : </Directory> : : <Directory "/home/httpd/cgi-bin"> : Options ExecCgi :    Order allow,deny :    Allow from all : </Directory> : : ================================================================= : : -- : 소반입니다.

Copyleft 1999-2026 by JSBoard Open Project Theme Designed by IDOO All right reserved