적수네 동네 - 질문과 답변 [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

한국통신 adsl을 이용한 network설정에 애를 먹고 있는 사람입니다.
 먼저 저는 알짜 배포한 6.2를 사용중이구요.
 받은 시디 pppoe-1.300.000 디렉토리하에
option.pppoe, pppoed-2.0, pppoed-2.2, start-pppoe, stop-pppoe
다섯개의 화일이 있습니다.
 pppoed-2.2를 pppoed로 바꾸고, start-pppoe, stop-pppoe와 더불어,
/usr/local/bin에 복사했습니다.
 다음, start-pppoe를 수정합니다.
USERID에 myuserid를 대체합니다.
 ---
#!/bin/bash
 # Copyright (c) 1999,2000 by Network TeleSystems, Inc.
# All rights reserved.
# Internet http://www.nts.com #
# Please direct all support-related calls to your licensed Internet Service 
# Provider.  NTS does not provide direct support.  NTS works through Internet
# Service Providers that have licensed our software.
 unset USERID
unset ACNAME
unset SERVICENAME
unset ETHERNET
unset LINKNAME
unset SYNC
unset PERSIST
 #----- Beginning of User Changeable Area ----------------------------------
 # Note, when making changes be sure NOT to insert white space (blanks)
# around the "=" symbol.  
# For example:  USERID= "RoadRunner"           
# This will not work.  It should be written as:  USERID="RoadRunner"
 # Replace YourUserID with that of the userid supplied by your ISP.
# You will also need to add the user-id and password to the 
# /etc/ppp/chap-secrets and/or /etc/ppp/pap-secrets file.
USERID="myuserid"    <--- 여기
 # If you need to connect to a specific service name then uncomment the line 
# below.  Replace YourServiceName with the service name specified by your ISP.
# SERVICENAME="YourServiceName"
 # If you need to access a specific Access Concentrator then uncomment the
# line below.  Replace YourAccessConcentratorName with the name specified by 
# your ISP. 
# ACNAME="YourAccessConcentratorName"
 # Not all systems can support the sync option.  Uncomment the next line if 
# yours can.  See the README, section IMPROVE PERFORMANCE, for more 
# information on when you can and cannot use this option.
# SYNC=sync
 # If you want your PPPoE connection to automatically reconnect if the 
# connection should break, uncomment the next line.
# PERSIST=persist
 # If the Ethernet NIC that you will be using is not at eth0 you will need
# to supply that information below by replacing eth0 with that of your
# network card.  ifconfig command will show a list of network interfaces.
INTERFACE="eth0"
 # Programs w/path.  If your system has these programs in different locations
# update the paths as appropriate.
PPPD=/usr/sbin/pppd
PPPOED=/usr/local/bin/pppoed
IFCONFIG=/sbin/ifconfig
 #----- End User Changeable Area ------------------------------------------------
 if [ "$USERID" = "YourUserID" ]; then
    echo &#039;Are you sure your correct login user ID is "YourUserID".&#039;
fi
 $IFCONFIG $INTERFACE 0.0.0.0 -broadcast up -arp
 if [ -n "$1" ]; then
    SERVICENAME="$1"
fi
 if [ -n "$SERVICENAME" ]; then
	SERVICENAME="-S $SERVICENAME"
fi
if [ -n "$ACNAME" ]; then
	ACNAME="-A $ACNAME"
fi
if [ -n "$INTERFACE" ]; then
	INTERFACE="-I $INTERFACE"
fi
if [ -n "$USERID" ]; then
	USERID="name $USERID"
fi
if [ -n "$PERSIST" ]; then
	PERSIST="persist"
fi
if [ -n "$SYNC" ]; then
	SYNC="sync"
fi
  $PPPD 
    pty "$PPPOED $INTERFACE $SERVICENAME $ACNAME" 
    $USERID 
    file /etc/ppp/options.pppoe 
    defaultroute 
    $SYNC 
    $PERSIST
   ---
 그후에, 
/etc/ppp/chap-secrets 와 pap-secrets 를 아래와 같이 바꿉니다.
물론 myuserid, donttell은 각각 한통 adsl 아이디와 비번입니다.
         # Secrets for Authentication using PAP   
        # Client    server      secret      IP address  
        myuserid    *           donttell    *
 그후, options.pppoe를 /etc/ppp 디렉토리에 넣었습니다.
 그후, 시스템 아디를 10.1.1.1로 바꾸로 기본 게이트웨이도 10.1.1.1로 바꿨습니다.
서브넷 마스크는 255.0.0.0
DHCP, bootp가 아닌 none으로 하고,
 다음은, ifconfig eth0 0.0.0.0 up -broadcast -arp
를 start-pppoe에 삽입해야 했으나 
 $IFCONFIG $INTERFACE 0.0.0.0 -broadcast up -arp
와 같으므로 그대로 놔두었습니다.
  그리고, 메인 서버를  /etc/resolv.conf화일에, 
         nameserver 168.126.63.1
        nameserver 168.126.63.2
 로 설정했습니다.
 현재는 ifconfig로 eth0, lo만 설정되었고,,
 /usr/local/bin/start-pppoe를 실행하니 에러가 났습니다.
뭘 찾지 못한다나 뭐라나,,
아무리 찾아도 디렉토리나 화일의 철자가 틀린건 없는데,,?
 제발 도와주십시오..