>> Edit article
이름
제목
패스워드
Linux KT-ADSL Setup User Guide Ver.0.0.1. 2000.07.17.-2000.07.20. BY laneiges@orgio.net CPU : P3 - 450E // 마더보드 점퍼설정이 안되서. 원래 600EB인데... RAM : 32MB HDD : 20GB VGA : RIVA TNT M64 - 32MB LAN : INTEL EEPRO 10 OS : ALZZA 6.1 / 2.2.12-20kr ## 시스템 구성 ┏ WINDOWS박스1 전화국 - ADSL외장형모뎀 - 허브 -[eth0]리눅스박스[eth1] - 허브 ╋ WINDOWS박스2 ┗ WINDOWS박스3 ### 설치개요 이 글은 아래까지만의 내용입니다... 전화국 - ADSL외장형모뎀 - [eth0]리눅스박스 ### 설치전 참고사항... 전, 리박스있고 윈박스 있고, 이 모든 작업을 make xconfig만 빼고 윈박스에서 작업했습니다. 그러니 디렉토리랑 같이해서. ftp로 리박스에 파일 전송하고, 텔넷으로 아래 명령어들 복사해서 엔터만 치면 100% 성공할거라고 생각됩니다... ### 설치파일준비 [root@laneiges /temp]# ll -rw-r--r-- 1 root root 15079540 Jul 18 23:41 linux-2.2.13.tar.gz -rw-r--r-- 1 root root 51821 Jul 18 23:45 pppoed0.4.tgz [root@laneiges /temp]# ### 커널 소스 풀기 [root@laneiges /temp]# cp linux-2.2.13.tar.gz /usr/src/ [root@laneiges /temp]# cd /usr/src/ [root@laneiges /usr/src]# ll total 30332 drwxr-xr-x 4 root root 4096 Jul 18 23:56 ./ drwxr-xr-x 21 root root 4096 Jul 18 14:20 ../ lrwxrwxrwx 1 root root 12 Jul 18 21:04 linux -> linux-2.2.14/ -rw-r--r-- 1 root root 15079540 Jul 18 23:56 linux-2.2.13.tar.gz drwxr-xr-x 15 1046 xfs 4096 Jul 18 22:31 linux-2.2.14/ -rw-r--r-- 1 root root 15918652 Jul 18 21:04 linux-2.2.14.tar.gz drwxr-xr-x 7 root root 4096 Jul 18 14:24 redhat/ [root@laneiges /usr/src]# rm -f linux [root@laneiges /usr/src]# mkdir linux-2.2.13 [root@laneiges /usr/src]# ln -snf linux-2.2.13 linux [root@laneiges /usr/src]# tar xvzf linux-2.2.13.tar.gz [root@laneiges /usr/src]# cd /usr/include [root@laneiges /usr/include]# ll asm linux scsi [root@laneiges /usr/include]# rm -rf asm linux scsi [root@laneiges /usr/include]# ln -s /usr/src/linux/include/asm-i386 asm [root@laneiges /usr/include]# ln -s /usr/src/linux/include/linux linux [root@laneiges /usr/include]# ln -s /usr/src/linux/include/scsi scsi [root@laneiges /usr/include]# cd /temp ### PPPoE 커널에 패치 [root@laneiges /temp]# cp pppoed0.4.tgz /usr/local/ [root@laneiges /temp]# cd /usr/local/ [root@laneiges /usr/local]# tar xzvf pppoed0.4.tgz [root@laneiges /usr/local]# cd /usr/src/linux/ [root@laneiges /usr/src/linux]# zcat /usr/local/pppoed-0.4/2213-pppox.gz | patch -b -p1 ### 커널 컴파일 [root@laneiges /usr/src/linux]# make mrproper [root@laneiges /usr/src/linux]# make xconfig // 이 명령어만 리박스에서 했음... ### 커널 컴파일 옵션 #pppoed를 사용하기 위해선 아래의 옵션들을 반드시 켜야 합니다.(Y,Yes) Network Device support Y "Network device support" Y "tty support for ppp over X" #IP Masquerading으로 내부 공유를 하기 위해서는 아래의 옵션들을 반드시 켜야 합니다.(Y,Yes) Code Maturity options Y "Prompt for development and/or incomplete code/drivers" Loadable module support Y "Enable loadable module" General Setup Y "Networking Suppoort" Networking options Y "Network firewalls" Y "TCP/IP Networking" Y "IP: firewalling" Y "IP: masquerading" Y "IP: ICMP masquerading" Y "IP: masquerading special modules suppport" M "IP: ipautofw masquerade support" M "IP: ipportfw masq support" M "IP: ip fwmark masq-forwarding support" Network device support Y "Network device support" M "Dummy net driver support" M "PPP (point to point) support" Ethernet (10 or 100Mbit) M "RealTek 8129/8139 (not 8019/8029!) support" M "PCI NE2000 support" <========매우 중요 그외 적당한 옵션으로 자신의 시스템에 맞게 설정한 후 저장하고 나온다. 계속진행된다 ### 커널 컴파일 실행 [root@laneiges /usr/src/linux]# make dep [root@laneiges /usr/src/linux]# make clean [root@laneiges /usr/src/linux]# make bzImage [root@laneiges /usr/src/linux]# cd arch/i386/boot ### 커널설치 [root@laneiges /usr/src/linux/arch/i386/boot]# cp bzImage /boot/vmlinuz-2.2.13 [root@laneiges /usr/src/linux/arch/i386/boot]# cp /usr/src/linux/System.map /boot/System.map-2.2.13 [root@laneiges /usr/src/linux/arch/i386/boot]# cd /boot [root@laneiges /boot]# rm -rf System.map [root@laneiges /boot]# ln -s System.map-2.2.13 System.map [root@laneiges /boot]# vi /etc/rc.d/init.d/syslog daemon klogd -> daemon klogd -k /boot/System.map-'uname -r' [root@laneiges /boot]# cd /usr/src/linux ### 모듈설치 [root@laneiges /usr/src/linux]# make modules [root@laneiges /usr/src/linux]# make modules_install [root@laneiges /usr/src/linux]# depmod -a [root@laneiges /usr/src/linux]# cd /etc ### lilo 설정 [root@laneiges /etc]# vi lilo.conf boot=/dev/hda map=/boot/map install=/boot/boot.b prompt timeout=50 default=linux image=/boot/vmlinuz-2.2.12-20kr label=linux initrd=/boot/initrd-2.2.12-20kr.img read-only root=/dev/hda7 image=/boot/vmlinuz-2.2.13 label=adsl read-only root=/dev/hda7 [root@laneiges /etc]# lilo Added linux * Added adsl ### PPPoed를 컴파일하는 절차이다. [root@laneiges /etc]# cd /usr/local/pppoed-0.4/ [root@laneiges /usr/local/pppoed-0.4]# make realclean [root@laneiges /usr/local/pppoed-0.4]# make dev [root@laneiges /usr/local/pppoed-0.4]# make depend [root@laneiges /usr/local/pppoed-0.4]# make [root@laneiges /usr/local/pppoed-0.4]# make install ### 새 커널로 부팅 -> 순서가 바뀌어야 될 수도 있음... [root@laneiges /usr/local/pppoed-0.4]# reboot lilo: linux13 ### IP 설정 ifconfig your ethernet device. It is not necessary you give it ip address 0.0.0.0 (but it may be good practise). Just make sure you dont have the default route set since PPPOE will give you one. ### 요구사항 레드햇 6.0이상에서는 pppd의 버전 2.3.7이상 요구 하지만 2.3.10이 설치되어있음... ### PPPoE 환경설정 1 [root@laneiges ~]# vi /etc/ppp/options lock local nocrtscts noauth #be careful with mtu/mru if you are masquareding. # Look at Kal Lin's page at http://www.cs.toronto.edu/~kal/hse/resource.html mru 1490 mtu 1490 #please make sure you have noaccomp for now noaccomp #the construct below is needed by sympatico name "12345678" // 자신의 코넷 아이디를 입력한다. #you might want to change defaultroute if you have more #than one pppoe session defaultroute hide-password sync #it might be a good idea to uncoment the debug below #debug #kdebug 7 #if you use the -R option to make it persistent #then uncomment the next two lines below #lcp-echo-interval 240 #lcp-echo-failure 3 #nodetach #add anything else you need as well ### PPPoE 환경설정 2 [root@laneiges ~]# vi /etc/ppp/pap-secrets # Secrets for authentication using PAP # client server secret IP addresses 12345678 * 1234 [root@laneiges /usr/local/pppoed-0.4]# chmod 600 /etc/ppp/pap-secrets ### PPPoE 실행 [root@laneiges ~]# cd /usr/sbin/pppoed [root@laneiges /usr/sbin/pppoed]# ./pppoed or [root@laneiges /usr/sbin/pppoed]# ./pppoed -I eth0 // l은 i의 대문자 ### 에러 메세지 나오고 ppp0생겼음. 접속은 안됨 ### vi /usr/local/pppoed-0.4/pppoed.c 이렇게 해도 안되면 pppoed.c를 살짝 손보아서 다시 시도해 보십시오. #define DISC_DEB2 1 <-- 이 줄 앞뒤의 주석 표시 (/*, */)를 지우고서, make clean make make install ### 다시 에러 Total retries to go 0 Sending PADI send_packet: ifn eth0 Ethernet header: h_dest: ff:ff:ff:ff:ff:ff: h_source: 00 aa 00 6d a2 fa h_proto: 0x8863 (PPPoE Discovery) PPPoE header: ver: 0x1 type: 0x1 code: 0x09 session: 0x0000 length: 0x0004 (PADI) PPPoE tag: type: 0101 length: 0000 (Service name) waiting for PADO PADO received! Ethernet header: h_dest: 00 aa 00 6d a2 fa h_source: 00 90 39 c5 40 3d h_proto: 0x8863 (PPPOE Discovery) PPPoE header: ver: 0x1 type: 0x1 code: 0x07 session: 0x0000 length: 0x0011 (PADO) PPPoE tag: type: 0101 length: 0000 (Service name) PPPoE tag: type: 0102 length: 0009 (AC name) data (UTF-8): kangseo-1 Scanning for Service Name scan_tag: tag 0x804cd24 length 0 tag->type 101 scan-tag data (bin) Found it! Scanning for AC Name scan_tag: tag 0x804cd28 length 0 tag->type 101 scan-tag data (bin) scan_tag: not matched! scan_tag: tag 0x804cd28 length 9 tag->type 102 scan-tag data (bin): 6b616e6773656f2d31 Found it! Scanning for AC cookies scan_tag: tag 0x804cd24 length 0 tag->type 101 scan-tag data (bin) scan_tag: not matched! scan_tag: tag 0x804cd28 length 9 tag->type 102 scan_tag data (bin): 6b616e6773656f2d31 scan_tag: not matched! Sending PADR send_packet: ifn eth0 Ethernet header: h_dest: 00 90 39 c5 40 3d h_source: 00 aa 00 6d a2 fa h_proto: 0x8863 (PPPoE Discovery) PPPoE header: ver: 0x1 type: 0x1 code: 0x19 session: 0x0000 length: 0x0011 (PADR) PPPoE tag: type: 0101 length: 0000 (Service name) PPPoE tag: type: 0102 length: 0009 (AC name) data (UTF-8): kangseo-1 Waiting for PADS OK! Discovery is completed successfully We got session ID 1286 506 AC MAC: 0 90 39 c5 40 3d MAC: 0 90 39 c5 40 3d cntrl: SessionID (605) PPP started pid is: 650 starting pppd using options file : /etc/ppp/options to pppox interface pppox0 *** Child Received signal 17 PID 649 *** status is: 0 Line id which died is: 0 OK we got killed ### 접속안됨니다. 어디가 잘못되었는지요... ### 참고로 부팅시 나오는 사항입니다. Linux version 2.2.13 (root@laneiges.interwebnetwork.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Thu Jul 20 07:14:23 KST 2000 Detected 451035525 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 448.92 BogoMIPS Memory: 64004k/66496k available (1072k kernel code, 416k reserved, 940k data, 64k init) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium III (Coppermine) stepping 03 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfb2b0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Registering PPPoE driver ^^^^^^^^^^^^^^^^^^^^^^^^ apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLlct10 20, ATA DISK drive hdc: CRD-8481B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALLlct10 20, 19470MB w/418kB Cache, CHS=2482/255/63 hdc: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 216836k swap-space (priority -1) id: 0x34 io: 0x300 eth0: Intel EtherExpress Pro/10 ISA at 0x300, 00:aa:00:6d:a2:fa, IRQ 9, 10BaseT. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ eth0: set Rx mode to 1 address. eth0: set Rx mode to 1 address. eth0: set Rx mode to 1 address. ### pppoed 하기전의 ifconfig eth0 Link encap:Ethernet HWaddr 00:AA:00:6D:A2:FA inet addr:21x.x26.x25.248 Bcast:21x.x26.x25.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:65 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:9 Base address:0x300 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ### pppoed 하기전의 ps ax PID TTY STAT TIME COMMAND 1 ? S 0:04 init 2 ? SW 0:00 [kflushd] 3 ? SW 0:00 [kupdate] 4 ? SW 0:00 [kpiod] 5 ? SW 0:00 [kswapd] 285 ? S 0:00 portmap 301 ? S 0:00 /usr/sbin/apmd -p 10 -w 5 -W 354 ? S 0:00 syslogd -m 0 365 ? S 0:00 klogd - klogd -k /boot/System.map-uname -r 381 ? S 0:00 /usr/sbin/atd 397 ? S 0:00 crond 417 ? S 0:00 inetd 433 ? S 0:00 lpd 471 ? S 0:00 sendmail: accepting connections on port 25 488 ? S 0:00 gpm -t ps/2 504 ? S 0:00 proftpd (accepting connections) 521 ? S 0:00 xfs -droppriv -daemon -port -1 556 tty1 S 0:00 login -- root 557 tty2 S 0:00 /sbin/mingetty tty2 558 tty3 S 0:00 /sbin/mingetty tty3 559 tty4 S 0:00 /sbin/mingetty tty4 560 tty5 S 0:00 /sbin/mingetty tty5 561 tty6 S 0:00 /sbin/mingetty tty6 564 tty1 S 0:00 -bash 597 tty1 R 0:00 ps ax ### pppoed 한 후의 ifconfig eth0 Link encap:Ethernet HWaddr 00:AA:00:6D:A2:FA inet addr:21x.x26.x25.248 Bcast:21x.x26.x25.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:301 errors:0 dropped:0 overruns:0 frame:0 TX packets:105 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:100 Interrupt:9 Base address:0x300 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:211.193.236.132 P-t-P:192.168.1.3 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1490 Metric:1 RX packets:103 errors:0 dropped:0 overruns:0 frame:0 TX packets:103 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 ### pppoed 한 후의 ps ax PID TTY STAT TIME COMMAND 1 ? S 0:04 init 2 ? SW 0:00 [kflushd] 3 ? SW 0:00 [kupdate] 4 ? SW 0:00 [kpiod] 5 ? SW 0:00 [kswapd] 285 ? S 0:00 portmap 301 ? S 0:00 /usr/sbin/apmd -p 10 -w 5 -W 354 ? S 0:00 syslogd -m 0 365 ? S 0:00 klogd - klogd -k /boot/System.map-uname -r 381 ? S 0:00 /usr/sbin/atd 397 ? S 0:00 crond 417 ? S 0:00 inetd 433 ? S 0:00 lpd 471 ? S 0:00 sendmail: accepting connections on port 25 488 ? S 0:00 gpm -t ps/2 504 ? S 0:00 proftpd (accepting connections) 521 ? S 0:00 xfs -droppriv -daemon -port -1 556 tty1 S 0:00 login -- root 557 tty2 S 0:00 login -- root 558 tty3 S 0:00 /sbin/mingetty tty3 559 tty4 S 0:00 /sbin/mingetty tty4 560 tty5 S 0:00 /sbin/mingetty tty5 561 tty6 S 0:00 /sbin/mingetty tty6 564 tty1 S 0:00 -bash 617 tty2 S 0:00 -bash 654 ? S 0:00 pppd pppox0 38400 file /etc/ppp/options 698 tty1 R 0:00 ps ax ### 위 사항대로 리눅스 사랑넷에 질문을 했더니... ### 리눅스 사랑넷 답변... 혹시 gateway 가 설정되어 있지않으신지요??? 그리고 원래의 ip주소가 2xx.xxx.xxx.xxx이던데 혹시 ADSL말고 따로 사용하시는 전용선이 있었는지요? 일단은 gateway가 설정되어 있다면 gateway를 없애시고 ip address를 192.168.0.x 로 바꿔보십시요... ### 수정사항... 위의 2xx.xxx.xxx.xxx는 전에 전용선 쓸때의 아이피입니다. 지금은 끊고 adsl을 사용하지만. 내부공유할 때 쓰는 거라... vi /etc/hosts vi /etc/sysconfig/network vi /etc/sysconfig/network-script/ifup-eth0 에서 IP 부분이랑 GATEWAY부분 없애니까... ### 음... 성공입니다... ### 그럼 즐거운 리눅싱 하시길... ### 참고로 커널 소스 받아서. 다른 분들이 제시해준 값만 가지고 컴파일 하면은 에러 납니다... 전 그 컴파일 옵션 부분을 찾느라고 고생좀 했는데. 의외로 간단하더군요... 그 방법은 못갈켜 줍니다... 뭐 고수분들이야. 알아서 잘 하시겠지만 저같은 초보는...
Copyleft
1999-2026 by
JSBoard Open Project
Theme Designed by
IDOO
All right reserved