적수네 동네 - 1원짜리 팁? [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

: 제목 : 맥킨토시(PowerBook)에 데비안설치하기..
: 
:  갑작스럽게 접한 맥킨토시 시스템과.. 
: 접하자 마자 리눅스로 엎어버릴려는 무식한 발상으로.. 
: 3일만에 데비안을 설치하는데 성공하였습니다...씨디로 부팅하는방법도모르고 
: 아무것도 모르는..상태에서... 
: 
: 맥킨토시 기종은.. 
: 코드네임 : 머큐리 
: 일명 : Ti Book(타이북) 
: 이름 : PowerBook 
: 링크 : http://www.apple.com/powerbook/ : 모델 : G4/400 , 10G, ati rage128 mobile 
: 
: http://people.debian.org/~ieure/netinst/releases/20020212/woody_netinst-20020212-powerpc.iso : 맥킨토시용 debian woody "netinst" iso images 를 받아서 CD로 만듬.. 
: 
: 1. 파티션 나누기 
: 
: 맥에서 파티션은 이런식으로 나눠야 한다.. 
: 1 - HFS (HFS+ 아님!), yaboot, 50~60메가 가량 
: 2 - AU/X, / , 리눅스파티션 
: 3 - swap, 스왑 
: 4 - HFS+, MacOS 
: 
: 파티션이 hda9 부터 시작한다.. 
: 고로.. 
: hda9, hda10, hda11, hda12가 된다. 
: 
: 파티션 나누는 법은..우선..맥킨토시에서 제공한 CD로 부팅한다. 
: 유틸리티에 가면..하드디스트 초기화하는게 있다.. 
: 그때 나누워주면 된다..자세한방법은 
: 맥관련사이트에서.. 
: http://www.maclink.co.kr : http://www.maczoo.com : 
: 2. 데비안리눅스 설치하기 
: 미리만든 netinst CD를 넣고 시동과함께.. C키를 누른다. 
: 그럼 CD로 부팅이 된다. 
: 내 경우 Linux-novideo 로 부팅해야됬다.. 
: Linux video=ofonly 와 같다.. 
: 그다음부턴.. IBM컴퓨터에 리눅스까는것과 같다..계속 쭉쭉나감.. 
: 하드 부트로더설치에서 막힐것이다.. 
: new world기종에선 않먹힌단다.. 
: 밑에.. excute shell을 선택한다.. 
: 
: mkofboot --boot /dev/hda9 -m /usr/lib/yaboot/ofboot --root /dev/hda10 --partition 10 
: 
: exit 
: 
: reboot선택 
: 
: 
: 3. 데비안리눅스 셋팅 
: yaboot이 뜨면.. 
: Linux video=novideo 로 부팅.. 
: 역시..부팅되고나면 IBM계열과 비슷...그대로 진행해 나간다.. 
: 커널은 2.4.16 powerpc용으로 dselect로 설치했다.. 
: 
: 맥킨토시 키보드는 특이하다..특히..노트북이므로..대부분 펑션으로 되어있다. 
: 진짜 키가 않먹혀서..고생했다.. 
: YellowDogLinux에서 키보드배열을 따왔다.. 
: ftp://ftp.yellowdoglinux.com/pub/linux/distributions/yellowdog/yellowdog-2.1/ppc/install/ramdisk-text.image.gz : 이걸 받아서.. 
: tar xv ramdisk-text.image.gz 
: mount -o ro,loop=/dev/loop0 ramdisk-text.image /mnt/test 
: 기억이 가물가물하지만.. 
: /mnt/test/usr/lib/kbd/kemaps/i386/qwerty/us.kmap.gz 
: 파일을 
: /etc/console/boottime.kmap.gz 로 덥어버린다.. 
: 키보드가 그럼 만족스럽게 모두 동작한다.. 
: 
: 버철터미널사용은 
: Option(Alt) + Ctrl + fn + F1 
: 이런식으로 사용하면 된다.. 
: 
: 이제...최고의 삽질을 요했던건.. X윈도우였다.. 
: 파워북은 15.2인치의 와이드 화면이다.. 
: 1152x768 
: ===================나의 XF86Config-4 파일======================== 
: Section "Files" 
: #FontPath "unix/:7100" # local font server 
: # if the local font server has problems, we can fall back on these 
: FontPath "/usr/lib/X11/fonts/sun" 
: FontPath "/usr/lib/X11/fonts/gulim" 
: FontPath "/usr/lib/X11/fonts/misc" 
: FontPath "/usr/lib/X11/fonts/cyrillic" 
: #FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" 
: FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" 
: FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" 
: FontPath "/usr/lib/X11/fonts/Type1" 
: FontPath "/usr/lib/X11/fonts/Speedo" 
: #FontPath "/usr/lib/X11/fonts/100dpi" 
: FontPath "/usr/lib/X11/fonts/75dpi" 
: FontPath "/usr/lib/X11/fonts/100dpi" 
: EndSection 
: 
: Section "Module" 
: Load "GLcore" 
: Load "bitmap" 
: Load "dbe" 
: #Load "ddc" 
: #Load "dri" 
: Load "extmod" 
: Load "freetype" 
: Load "glx" 
: #Load "int10" 
: Load "pex5" 
: Load "record" 
: Load "speedo" 
: Load "type1" 
: #Load "vbe" 
: #Load "xie" 
: #Load "xtt" 
: EndSection 
: 
: Section "InputDevice" 
: Identifier "Generic Keyboard" 
: Driver "keyboard" 
: #Option "CoreKeyboard" 
: #Option "XkbRules" "xfree86" 
: #Option "XkbModel" "macintosh" 
: #Option "XkbLayout" "us" 
: EndSection 
: 
: Section "InputDevice" 
: Identifier "Configured Mouse" 
: Driver "mouse" 
: Option "CorePointer" 
: Option "Device" "/dev/mouse" 
: Option "Protocol" "IMPS/2" 
: Option "Emulate3Buttons" "true" 
: Option "ZAxisMapping" "4 5" 
: EndSection 
: 
: Section "InputDevice" 
: Identifier "Generic Mouse" 
: Driver "mouse" 
: Option "SendCoreEvents" "true" 
: Option "Device" "/dev/input/mice" 
: Option "Protocol" "ImPS/2" 
: Option "Emulate3Buttons" "true" 
: Option "ZAxisMapping" "4 5" 
: EndSection 
: 
: Section "Device" 
: Identifier "Generic Video Card" 
: Option "HWcursor" 
: Driver "r128" 
: BusID "PCI:0:16:0" 
: Option "UseFBDev" "true" 
: EndSection 
: 
: Section "Monitor" 
: Identifier "Monitor0" 
: UseModes "Modes0" 
: ModelName "Monitor Model" 
: HorizSync 30-100 
: VertRefresh 50-160 
: Option "DPMS" 
: EndSection 
: 
: Section "Modes" 
: Identifier "Modes0" 
: Modeline "1024x768" 78.525 1024 1049 1145 1312 768 769 772 800 +hsync +vsync 
: Modeline "800x600" 62.357 800 821 901 1040 600 601 604 632 +hsync +vsync 
: Modeline "1152x768" 64.994 1152 1178 1314 1472 768 771 777 806 +HSync +VSync 
: EndSection 
: 
: 
: Section "Screen" 
: Identifier "Screen0" 
: Device "Generic Video Card" 
: Monitor "Monitor0" 
: DefaultDepth 15 
: SubSection "Display" 
: Depth 8 
: Modes "1152x768" "800x600" 
: EndSubSection 
: SubSection "Display" 
: Depth 15 
: Modes "1152x768" "800x600" 
: EndSubSection 
: SubSection "Display" 
: Depth 16 
: Modes "1152x768" "800x600" 
: EndSubSection 
: SubSection "Display" 
: Depth 24 
: Modes "1152x768" "800x600" 
: EndSubSection 
: EndSection 
: 
: Section "ServerLayout" 
: Identifier "Default Layout" 
: Screen "Screen0" 
: InputDevice "Generic Keyboard" "CoreKeyboard" 
: InputDevice "Configured Mouse" 
: InputDevice "Generic Mouse" 
: EndSection 
: 
: Section "DRI" 
: Mode 0666 
: EndSection 
: ================================================================ 
: 완벽하다..아직까진.. ㅡㅡ;; 
: 마우스는 USB 섹컨마우스도 쓸수있다.. 
: 
: 이상하게..기본적으로 yaboot.conf가 없다 
: /etc/yaboot.conf 를 만들어 주기 바란다. 
: ================== yaboot.conf ================================= 
: ## Example yaboot.conf for ybin and yaboot >= 0.6 
: ## see man yaboot.conf for more details. 
: 
: ## Change `unconfigured&#039; to your bootstrap partition eg: /dev/hda2 
: boot=/dev/hda9 
: 
: ## device is the OpenFirmware device path to the disk containing 
: ## kernel images. if your disk is /dev/hda you can find the 
: ## OpenFirmware path by running the command: ofpath /dev/hda DO NOT 
: ## specify a partition number for this! On IBM hardware you can 
: ## generally comment this out. 
: 
: device=hd: 
: 
: ## partition is the partition number where the kernel images are 
: ## located. The kernel images should be on your root filesystem, so 
: ## this is usually the same partition number as your root filesystem. 
: ## so if root = /dev/hda3 (the 3rd partition) then you should have 
: ## partition=3 This *MUST* be set correct or yaboot won&#039;t boot! This 
: ## option can be either set globally as shown here, or per image in 
: ## the image= sections 
: 
: partition=10 
: 
: ## delay is the amount of time in seconds the dual boot menu (if one 
: ## is configured, by the presense of macos, macosx, etc options here) 
: ## will wait before choosing the default OS (GNU/Linux or the value of 
: ## defaultos=). If you omit this then the value of timeout= 
: ## (converted to seconds) will be used. 
: 
: delay=10 
: defaultos=macos 
: macos=/dev/hda12 
: 
: ## timeout is the amount of time in tenths of a second that yaboot 
: ## will wait before booting the default kernel image (the first image= 
: ## section in this config file or the value of default=). 
: 
: timeout=40 
: install=/usr/lib/yaboot/yaboot 
: magicboot=/usr/lib/yaboot/ofboot 
: 
: ## Change the default colors, fgcolor is the text color, bgcolor is 
: ## the screen background color. (default: fgcolor=white, bgcolor=black) 
: #fgcolor=black 
: #bgcolor=green 
: 
: ## Password supplied in plaintext, required for yaboot to boot, unless 
: ## restricted is also present (see below). Be sure to 
: ## chmod 600 /etc/yaboot.conf if you set this! 
: 
: #password= 
: 
: ## Password supplied as an md5 hash, see above 
: 
: #password=$1$saltstri$WHZcnT3IOdSrMvizOq7Ht1 
: 
: ## A password is only required to boot an image specified here if 
: ## parameters are specified on the command line or if the user enters 
: ## an image is not specified in the configuration file at all (ie. 
: ## arbitrary file load). restricted can also be placed in an image 
: ## section in that case any image not including the restricted keyword 
: ## will be fully password protected. 
: 
: #restricted 
: 
: ## image is the kernel itself, commonly kept in / but also commonly 
: ## found in /boot. Note that /boot should generally not be its own 
: ## partition on powerpcs, its not necessary and complicates things. 
: ## Make sure /boot is on the partition specified by partition= see 
: ## above. /boot should never be an HFS filesystem. You may point 
: ## image= to a symbolic link so long as the symlink does not cross 
: ## partition boundries. 
: 
: image=/vmlinux 
: label=Linux 
: root=/dev/hda10 
: read-only 
: #append="hdc=ide-scsi" 
: append="devfs=mount" 
: append="apm=on" 
: 
: image=/vmlinux.old 
: label=Linux.old 
: root=/dev/hda10 
: read-only 
: 
: ================================================================= 
: 
: ybin 이라 타이핑한다.. 
: 그럼 부트로더 완료.. 
: 이제부턴....크게..IBM계열 컴퓨터와 다른것이 없다. 
: 
: 사운드카드의 경우..
: modconf로 간단히 모듈만올려주면된다..
: dmasound인가..
: 
: 
: 해결해야될 문제들.. 
: 1. DualHead사용 : 파워북은..미러방식의 
: 외부VGA가 아닌..듀얼헤드이다.. 
: 아직시도는 않해봤다. 
: XF86Config-4파일 수정만으로..가능할듯하다.. 
: 
: 2. 맥마우스는 버튼이 한개이다.. ㅡ.ㅡ;; 
: 섹컨마우스로 해결하고있지만...외출시를 생각해..해결해야될듯.. ㅡ.ㅡ;; 
: 
: 3. 서스펜드모드 
: 원래 노트북을 덮으면..바로 서스펜드모드로 들어간다.. 
: YellowDogLinux를 깔았을때도.. 
: 데비안은..노트북덮어도..액정이 켜져있다.. 
: ...다시 커널컴파일해야될거같다..apm 모드 
: 
: -굴렁이 
: shwj@hananet.net : http://www.gulung.org : 
 : ps. 본문이 반말이라 죄송합니다..편의상..
: 
: --
: PowerBook Ti
 노란개리눅스도 깔아보신것 같은데,  데비안 woody와 비교하면 어떤가요?
참고로 저는 아이북600dvd에 노란개 쓰고 있습니다.  비교사용기가 궁금하군요.