적수네 동네 - 1원짜리 팁? [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

아무래도 yellowdoglinux는 맥킨토시전용 배포판이니까..
인스톨즉시 아무것도 않건드려도 되지요..
 저의 경우는..데비안을 써왔기때문에..
rpm에 익숙하지 않아서..
 데비안을 설치했습니다..
한글도 쉽게 셋팅했구요..
 결론으로 크게 다른건 없습니다..
한글화가 쉽고..데비안이 익숙해져있어서...
  : : 제목 : 맥킨토시(PowerBook)에 데비안설치하기..
: : 
: :  갑작스럽게 접한 맥킨토시 시스템과.. 
: : 접하자 마자 리눅스로 엎어버릴려는 무식한 발상으로.. 
: : 3일만에 데비안을 설치하는데 성공하였습니다...씨디로 부팅하는방법도모르고 
: : 아무것도 모르는..상태에서... 
: : 
: : 맥킨토시 기종은.. 
: : 코드네임 : 머큐리 
: : 일명 : Ti Book(타이북) 
: : 이름 : PowerBook 
: : 링크 : http://www.apple.com/powerbook/ : : 모델 : G4/400 , 10G, ati rage128 mobile 
: : 
: : http://people.debian.org/~ieure/netinst/releases/20020212/woody_netinst-20020212-powerpc.iso : : 맥킨토시용 debian woody "netinst" iso images 를 받아서 CD로 만듬.. 
: : 
: : 1. 파티션 나누기 
: : 
: : 맥에서 파티션은 이런식으로 나눠야 한다.. 
: : 1 - HFS (HFS+ 아님!), yaboot, 50~60메가 가량 
: : 2 - AU/X, / , 리눅스파티션 
: : 3 - swap, 스왑 
: : 4 - HFS+, MacOS 
: : 
: : 파티션이 hda9 부터 시작한다.. 
: : 고로.. 
: : hda9, hda10, hda11, hda12가 된다. 
: : 
: : 파티션 나누는 법은..우선..맥킨토시에서 제공한 CD로 부팅한다. 
: : 유틸리티에 가면..하드디스트 초기화하는게 있다.. 
: : 그때 나누워주면 된다..자세한방법은 
: : 맥관련사이트에서.. 
: : http://www.maclink.co.kr : : http://www.maczoo.com : : 
: : 2. 데비안리눅스 설치하기 
: : 미리만든 netinst CD를 넣고 시동과함께.. C키를 누른다. 
: : 그럼 CD로 부팅이 된다. 
: : 내 경우 Linux-novideo 로 부팅해야됬다.. 
: : Linux video=ofonly 와 같다.. 
: : 그다음부턴.. IBM컴퓨터에 리눅스까는것과 같다..계속 쭉쭉나감.. 
: : 하드 부트로더설치에서 막힐것이다.. 
: : new world기종에선 않먹힌단다.. 
: : 밑에.. excute shell을 선택한다.. 
: : 
: : mkofboot --boot /dev/hda9 -m /usr/lib/yaboot/ofboot --root /dev/hda10 --partition 10 
: : 
: : exit 
: : 
: : reboot선택 
: : 
: : 
: : 3. 데비안리눅스 셋팅 
: : yaboot이 뜨면.. 
: : Linux video=novideo 로 부팅.. 
: : 역시..부팅되고나면 IBM계열과 비슷...그대로 진행해 나간다.. 
: : 커널은 2.4.16 powerpc용으로 dselect로 설치했다.. 
: : 
: : 맥킨토시 키보드는 특이하다..특히..노트북이므로..대부분 펑션으로 되어있다. 
: : 진짜 키가 않먹혀서..고생했다.. 
: : YellowDogLinux에서 키보드배열을 따왔다.. 
: : ftp://ftp.yellowdoglinux.com/pub/linux/distributions/yellowdog/yellowdog-2.1/ppc/install/ramdisk-text.image.gz : : 이걸 받아서.. 
: : tar xv ramdisk-text.image.gz 
: : mount -o ro,loop=/dev/loop0 ramdisk-text.image /mnt/test 
: : 기억이 가물가물하지만.. 
: : /mnt/test/usr/lib/kbd/kemaps/i386/qwerty/us.kmap.gz 
: : 파일을 
: : /etc/console/boottime.kmap.gz 로 덥어버린다.. 
: : 키보드가 그럼 만족스럽게 모두 동작한다.. 
: : 
: : 버철터미널사용은 
: : Option(Alt) + Ctrl + fn + F1 
: : 이런식으로 사용하면 된다.. 
: : 
: : 이제...최고의 삽질을 요했던건.. X윈도우였다.. 
: : 파워북은 15.2인치의 와이드 화면이다.. 
: : 1152x768 
: : ===================나의 XF86Config-4 파일======================== 
: : Section "Files" 
: : #FontPath "unix/:7100" # local font server 
: : # if the local font server has problems, we can fall back on these 
: : FontPath "/usr/lib/X11/fonts/sun" 
: : FontPath "/usr/lib/X11/fonts/gulim" 
: : FontPath "/usr/lib/X11/fonts/misc" 
: : FontPath "/usr/lib/X11/fonts/cyrillic" 
: : #FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" 
: : FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" 
: : FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" 
: : FontPath "/usr/lib/X11/fonts/Type1" 
: : FontPath "/usr/lib/X11/fonts/Speedo" 
: : #FontPath "/usr/lib/X11/fonts/100dpi" 
: : FontPath "/usr/lib/X11/fonts/75dpi" 
: : FontPath "/usr/lib/X11/fonts/100dpi" 
: : EndSection 
: : 
: : Section "Module" 
: : Load "GLcore" 
: : Load "bitmap" 
: : Load "dbe" 
: : #Load "ddc" 
: : #Load "dri" 
: : Load "extmod" 
: : Load "freetype" 
: : Load "glx" 
: : #Load "int10" 
: : Load "pex5" 
: : Load "record" 
: : Load "speedo" 
: : Load "type1" 
: : #Load "vbe" 
: : #Load "xie" 
: : #Load "xtt" 
: : EndSection 
: : 
: : Section "InputDevice" 
: : Identifier "Generic Keyboard" 
: : Driver "keyboard" 
: : #Option "CoreKeyboard" 
: : #Option "XkbRules" "xfree86" 
: : #Option "XkbModel" "macintosh" 
: : #Option "XkbLayout" "us" 
: : EndSection 
: : 
: : Section "InputDevice" 
: : Identifier "Configured Mouse" 
: : Driver "mouse" 
: : Option "CorePointer" 
: : Option "Device" "/dev/mouse" 
: : Option "Protocol" "IMPS/2" 
: : Option "Emulate3Buttons" "true" 
: : Option "ZAxisMapping" "4 5" 
: : EndSection 
: : 
: : Section "InputDevice" 
: : Identifier "Generic Mouse" 
: : Driver "mouse" 
: : Option "SendCoreEvents" "true" 
: : Option "Device" "/dev/input/mice" 
: : Option "Protocol" "ImPS/2" 
: : Option "Emulate3Buttons" "true" 
: : Option "ZAxisMapping" "4 5" 
: : EndSection 
: : 
: : Section "Device" 
: : Identifier "Generic Video Card" 
: : Option "HWcursor" 
: : Driver "r128" 
: : BusID "PCI:0:16:0" 
: : Option "UseFBDev" "true" 
: : EndSection 
: : 
: : Section "Monitor" 
: : Identifier "Monitor0" 
: : UseModes "Modes0" 
: : ModelName "Monitor Model" 
: : HorizSync 30-100 
: : VertRefresh 50-160 
: : Option "DPMS" 
: : EndSection 
: : 
: : Section "Modes" 
: : Identifier "Modes0" 
: : Modeline "1024x768" 78.525 1024 1049 1145 1312 768 769 772 800 +hsync +vsync 
: : Modeline "800x600" 62.357 800 821 901 1040 600 601 604 632 +hsync +vsync 
: : Modeline "1152x768" 64.994 1152 1178 1314 1472 768 771 777 806 +HSync +VSync 
: : EndSection 
: : 
: : 
: : Section "Screen" 
: : Identifier "Screen0" 
: : Device "Generic Video Card" 
: : Monitor "Monitor0" 
: : DefaultDepth 15 
: : SubSection "Display" 
: : Depth 8 
: : Modes "1152x768" "800x600" 
: : EndSubSection 
: : SubSection "Display" 
: : Depth 15 
: : Modes "1152x768" "800x600" 
: : EndSubSection 
: : SubSection "Display" 
: : Depth 16 
: : Modes "1152x768" "800x600" 
: : EndSubSection 
: : SubSection "Display" 
: : Depth 24 
: : Modes "1152x768" "800x600" 
: : EndSubSection 
: : EndSection 
: : 
: : Section "ServerLayout" 
: : Identifier "Default Layout" 
: : Screen "Screen0" 
: : InputDevice "Generic Keyboard" "CoreKeyboard" 
: : InputDevice "Configured Mouse" 
: : InputDevice "Generic Mouse" 
: : EndSection 
: : 
: : Section "DRI" 
: : Mode 0666 
: : EndSection 
: : ================================================================ 
: : 완벽하다..아직까진.. ㅡㅡ;; 
: : 마우스는 USB 섹컨마우스도 쓸수있다.. 
: : 
: : 이상하게..기본적으로 yaboot.conf가 없다 
: : /etc/yaboot.conf 를 만들어 주기 바란다. 
: : ================== yaboot.conf ================================= 
: : ## Example yaboot.conf for ybin and yaboot >= 0.6 
: : ## see man yaboot.conf for more details. 
: : 
: : ## Change `unconfigured&#039; to your bootstrap partition eg: /dev/hda2 
: : boot=/dev/hda9 
: : 
: : ## device is the OpenFirmware device path to the disk containing 
: : ## kernel images. if your disk is /dev/hda you can find the 
: : ## OpenFirmware path by running the command: ofpath /dev/hda DO NOT 
: : ## specify a partition number for this! On IBM hardware you can 
: : ## generally comment this out. 
: : 
: : device=hd: 
: : 
: : ## partition is the partition number where the kernel images are 
: : ## located. The kernel images should be on your root filesystem, so 
: : ## this is usually the same partition number as your root filesystem. 
: : ## so if root = /dev/hda3 (the 3rd partition) then you should have 
: : ## partition=3 This *MUST* be set correct or yaboot won&#039;t boot! This 
: : ## option can be either set globally as shown here, or per image in 
: : ## the image= sections 
: : 
: : partition=10 
: : 
: : ## delay is the amount of time in seconds the dual boot menu (if one 
: : ## is configured, by the presense of macos, macosx, etc options here) 
: : ## will wait before choosing the default OS (GNU/Linux or the value of 
: : ## defaultos=). If you omit this then the value of timeout= 
: : ## (converted to seconds) will be used. 
: : 
: : delay=10 
: : defaultos=macos 
: : macos=/dev/hda12 
: : 
: : ## timeout is the amount of time in tenths of a second that yaboot 
: : ## will wait before booting the default kernel image (the first image= 
: : ## section in this config file or the value of default=). 
: : 
: : timeout=40 
: : install=/usr/lib/yaboot/yaboot 
: : magicboot=/usr/lib/yaboot/ofboot 
: : 
: : ## Change the default colors, fgcolor is the text color, bgcolor is 
: : ## the screen background color. (default: fgcolor=white, bgcolor=black) 
: : #fgcolor=black 
: : #bgcolor=green 
: : 
: : ## Password supplied in plaintext, required for yaboot to boot, unless 
: : ## restricted is also present (see below). Be sure to 
: : ## chmod 600 /etc/yaboot.conf if you set this! 
: : 
: : #password= 
: : 
: : ## Password supplied as an md5 hash, see above 
: : 
: : #password=$1$saltstri$WHZcnT3IOdSrMvizOq7Ht1 
: : 
: : ## A password is only required to boot an image specified here if 
: : ## parameters are specified on the command line or if the user enters 
: : ## an image is not specified in the configuration file at all (ie. 
: : ## arbitrary file load). restricted can also be placed in an image 
: : ## section in that case any image not including the restricted keyword 
: : ## will be fully password protected. 
: : 
: : #restricted 
: : 
: : ## image is the kernel itself, commonly kept in / but also commonly 
: : ## found in /boot. Note that /boot should generally not be its own 
: : ## partition on powerpcs, its not necessary and complicates things. 
: : ## Make sure /boot is on the partition specified by partition= see 
: : ## above. /boot should never be an HFS filesystem. You may point 
: : ## image= to a symbolic link so long as the symlink does not cross 
: : ## partition boundries. 
: : 
: : image=/vmlinux 
: : label=Linux 
: : root=/dev/hda10 
: : read-only 
: : #append="hdc=ide-scsi" 
: : append="devfs=mount" 
: : append="apm=on" 
: : 
: : image=/vmlinux.old 
: : label=Linux.old 
: : root=/dev/hda10 
: : read-only 
: : 
: : ================================================================= 
: : 
: : ybin 이라 타이핑한다.. 
: : 그럼 부트로더 완료.. 
: : 이제부턴....크게..IBM계열 컴퓨터와 다른것이 없다. 
: : 
: : 사운드카드의 경우..
: : modconf로 간단히 모듈만올려주면된다..
: : dmasound인가..
: : 
: : 
: : 해결해야될 문제들.. 
: : 1. DualHead사용 : 파워북은..미러방식의 
: : 외부VGA가 아닌..듀얼헤드이다.. 
: : 아직시도는 않해봤다. 
: : XF86Config-4파일 수정만으로..가능할듯하다.. 
: : 
: : 2. 맥마우스는 버튼이 한개이다.. ㅡ.ㅡ;; 
: : 섹컨마우스로 해결하고있지만...외출시를 생각해..해결해야될듯.. ㅡ.ㅡ;; 
: : 
: : 3. 서스펜드모드 
: : 원래 노트북을 덮으면..바로 서스펜드모드로 들어간다.. 
: : YellowDogLinux를 깔았을때도.. 
: : 데비안은..노트북덮어도..액정이 켜져있다.. 
: : ...다시 커널컴파일해야될거같다..apm 모드 
: : 
: : -굴렁이 
: : shwj@hananet.net : : http://www.gulung.org : : 
: 
: : ps. 본문이 반말이라 죄송합니다..편의상..
: : 
: : --
: : PowerBook Ti
: 
: 노란개리눅스도 깔아보신것 같은데,  데비안 woody와 비교하면 어떤가요?
: 참고로 저는 아이북600dvd에 노란개 쓰고 있습니다.  비교사용기가 궁금하군요.--PowerBook Ti