적수네 동네 - 질문과 답변 [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

안녕하세요.
이번에 DHCP 서버를 돌리려고 랜카드를 한장 더 장착을 하고 DHCP서버를 
설치하려고 하는 랜카드는 잡히는데 네트워크가 먹통이 되네요.
우선 랜카드는 리얼텍8139B 2장입니다. 한장은 내부용 다른 한장은 외부용 
다음은 제 컴퓨터의 부팅 화면 입니다.
 Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
 BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable)
 BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
 BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
 BIOS-e820: 0000000003f00000 @ 0000000000100000 (usable)
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone DMA has max 32 cached pages.
zone(1): 12288 pages.
zone Normal has max 96 cached pages.
zone(2): 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2
Initializing CPU#0
Detected 350.813 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 62032k/65536k available (1365k kernel code, 3116k reserved, 92k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking &#039;hlt&#039; instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Disabled enhanced CPU to PCI posting #2
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
PCI: Cannot allocate resource region 4 of device 00:07.1
PCI: Cannot allocate resource region 0 of device 00:0a.0
  got res[1000:100f] for resource 4 of VIA Technologies, Inc. Bus Master IDE
  got res[1400:14ff] for resource 0 of Realtek Semiconductor Co., Ltd. RTL-8139 (#2)
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 41098kB/13699kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hda: ST313032A, ATA DISK drive
hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=1583/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 200772k swap-space (priority -1)
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=fc devrev=00 oldid=0b
Winbond chip type 83877AF
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (512 buckets, 4096 max)
8139too Fast Ethernet driver 0.9.15 loaded
PCI: Found IRQ 11 for device 00:08.0
PCI: Setting latency timer of device 00:08.0 to 64
8139too: PCI device 00:08.0: unknown chip version, assuming RTL-8139
8139too: PCI device 00:08.0: TxConfig = 0xffffffff
eth0: RealTek RTL8139 Fast Ethernet at 0xc482d000, ff:ff:ff:ff:ff:ff, IRQ 11
eth0:  Identified 8139 chip type &#039;RTL-8139&#039;
PCI: Found IRQ 10 for device 00:0a.0
eth1: RealTek RTL8139 Fast Ethernet at 0xc482f000, 00:40:95:30:7c:86, IRQ 10
eth1:  Identified 8139 chip type &#039;RTL-8139B&#039;
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is ffffffff. (queue head)
eth0:  Tx descriptor 1 is ffffffff.
eth0:  Tx descriptor 2 is ffffffff.
eth0:  Tx descriptor 3 is ffffffff.
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is ffffffff. (queue head)
eth0:  Tx descriptor 1 is ffffffff.
eth0:  Tx descriptor 2 is ffffffff.
eth0:  Tx descriptor 3 is ffffffff.
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is ffffffff. (queue head)
eth0:  Tx descriptor 1 is ffffffff.
eth0:  Tx descriptor 2 is ffffffff.
eth0:  Tx descriptor 3 is ffffffff.
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is ffffffff. (queue head)
eth0:  Tx descriptor 1 is ffffffff.
eth0:  Tx descriptor 2 is ffffffff.
eth0:  Tx descriptor 3 is ffffffff.
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
 로그 화면이 왜 이렇게 되죠??