>> Edit article
이름
제목
패스워드
모 리눅스 사이트 질답란에 올라와 있네요.. 한컴 2.2 는 php mysql 연동이 않된다고 하네요.. 혹시 그 답 보셨나 모르겠군요 rpm 설치시 어떻게 연동 시키는지 저도 모르니. apache + php + mysql 소스 컴파일 하시죠..음 : 안녕하세요.. : APM연동이 안되는거 같아서 질문을 하는데요.. : http://내주소/info.php3 란 파일을 보면.. : (mysql함수가 지원되는지 알아보는 파일) : mysql에 대한 항목이 나와야 하는데.. : 안나오면 어느분께서 APM연동이 안되는거 라고 하시더군요.. : 근데...또 어느분께서 답변해 주시길.. : 그게 안나오면 httpd.conf에서 설정을 잘못해줘서 그런거라고 하셨거든요.. : 그래서 그분이 해놓은신거 보고 대충은 아는대로 고쳐봤는데 : 이상이 있으면 죄송하지만 어느 부분이 이상이 있는지.. 가르쳐 주시기 바랍니다. : 제로보드를 설치하려고 하는데.. APM연동이 안되서 : install_ok.php화면에서 화면이 하얀화면만 나오네요.. : 제로보드가 답변들을 찾아보니깐 APM연동이 안되서 그런거라고 하셨는데 : 데몬들두 다 정상작동하구요.. 그렇다고 mysql에서 유저등록을 제대로 못해준거도 아닌데 : 암튼..제가 이상하게 설정했으면 가르쳐 주세요.. : 그리고 만약 여기에 이상이 없다면.. 제가 어떻게 해야 하는지 : 죄송하지만 가르쳐 주시기 바랍니다.. : 그럼 좋은하루 되세요! : : # : # Based upon the NCSA server configuration files originally by Rob McCool. : # : # This is the main Apache server configuration file. It contains the : # configuration directives that give the server its instructions. : # See <URL:http://www.apache.org/docs/> for detailed : information about : # the directives. : # : # Do NOT simply read the instructions in here without understanding : # what they do. They're here only as hints or reminders. If you are unsure : # consult the online docs. You have been warned. : # : # After this file is processed, the server will look for and process : # /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf : # unless you have overridden these with ResourceConfig and/or : # AccessConfig directives here. : # : # The configuration directives are grouped into three basic sections: : # 1. Directives that control the operation of the Apache server process as a : # whole (the 'global environment'). : # 2. Directives that define the parameters of the 'main' or 'default' server, : # which responds to requests that aren't handled by a virtual host. : # These directives also provide default values for the settings : # of all virtual hosts. : # 3. Settings for virtual hosts, which allow Web requests to be sent to : # different IP addresses or hostnames and have them handled by the : # same Apache server process. : # : # Configuration and logfile names: If the filenames you specify for many : # of the server's control files begin with "/" (or "drive:/" for Win32), the : # server will use that explicit path. If the filenames do *not* begin : # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" : # with ServerRoot set to "/usr/local/apache" will be interpreted by the : # server as "/usr/local/apache/logs/foo.log". : # : : ### Section 1: Global Environment : # : # The directives in this section affect the overall operation of Apache, : # such as the number of concurrent requests it can handle or where it : # can find its configuration files. : # : : # : # ServerType is either inetd, or standalone. Inetd mode is only supported on : # Unix platforms. : # : ServerType standalone : : # : # ServerRoot: The top of the directory tree under which the server's : # configuration, error, and log files are kept. : # : # NOTE! If you intend to place this on an NFS (or otherwise network) : # mounted filesystem then please read the LockFile documentation : # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); : # you will save yourself a lot of trouble. : # : # Do NOT add a slash at the end of the directory path. : # : ServerRoot "/etc/httpd" : : # : # The LockFile directive sets the path to the lockfile used when Apache : # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or : # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at : # its default value. The main reason for changing it is if the logs : # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL : # DISK. The PID of the main server process is automatically appended to : # the filename. : # : #LockFile /var/run/httpd.lock : : # : # PidFile: The file in which the server should record its process : # identification number when it starts. : # : PidFile /var/run/httpd.pid : : # : # ScoreBoardFile: File used to store internal server process information. : # Not all architectures require this. But if yours does (you'll know because : # this file will be created when you run Apache) then you *must* ensure that : # no two invocations of Apache share the same scoreboard file. : # : ScoreBoardFile logs/apache_runtime_status : : # : # In the standard configuration, the server will process httpd.conf (this : # file, specified by the -f command line option), srm.conf, and access.conf : # in that order. The latter two files are now distributed empty, as it is : # recommended that all directives be kept in a single file for simplicity. : # The commented-out values below are the built-in defaults. You can have the : # server ignore these files altogether by using "/dev/null" (for Unix) or : # "nul" (for Win32) for the arguments to the directives. : # : #ResourceConfig conf/srm.conf : #AccessConfig conf/access.conf : : # : # Timeout: The number of seconds before receives and sends time out. : # : Timeout 300 : : # : # KeepAlive: Whether or not to allow persistent connections (more than : # one request per connection). Set to "Off" to deactivate. : # : KeepAlive On : : # : # MaxKeepAliveRequests: The maximum number of requests to allow : # during a persistent connection. Set to 0 to allow an unlimited amount. : # We recommend you leave this number high, for maximum performance. : # : MaxKeepAliveRequests 100 : : # : # KeepAliveTimeout: Number of seconds to wait for the next request from the : # same client on the same connection. : # : KeepAliveTimeout 15 : : # : # Server-pool size regulation. Rather than making you guess how many : # server processes you need, Apache dynamically adapts to the load it : # sees --- that is, it tries to maintain enough server processes to : # handle the current load, plus a few spare servers to handle transient : # load spikes (e.g., multiple simultaneous requests from a single : # Netscape browser). : # : # It does this by periodically checking how many servers are waiting : # for a request. If there are fewer than MinSpareServers, it creates : # a new spare. If there are more than MaxSpareServers, some of the : # spares die off. The default values are probably OK for most sites. : # : MinSpareServers 5 : MaxSpareServers 10 : : # : # Number of servers to start initially --- should be a reasonable ballpark : # figure. : # : StartServers 5 : : # : # Limit on total number of servers running, i.e., limit on the number : # of clients who can simultaneously connect --- if this limit is ever : # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. : # It is intended mainly as a brake to keep a runaway server from taking : # the system with it as it spirals down... : # : MaxClients 150 : : # : # MaxRequestsPerChild: the number of requests each child process is : # allowed to process before the child dies. The child will exit so : # as to avoid problems after prolonged use when Apache (and maybe the : # libraries it uses) leak memory or other resources. On most systems, this : # isn't really needed, but a few (such as Solaris) do have notable leaks : # in the libraries. For these platforms, set to something like 10000 : # or so; a setting of 0 means unlimited. : # : # NOTE: This value does not include keepalive requests after the initial : # request per connection. For example, if a child process handles : # an initial request and 10 subsequent "keptalive" requests, it : # would only count as 1 request towards this limit. : # : MaxRequestsPerChild 0 : : # : # Listen: Allows you to bind Apache to specific IP addresses and/or : # ports, in addition to the default. See also the <VirtualHost> : # directive. : # : #Listen 3000 : #Listen 12.34.56.78:80 : #Listen 80 : : # : # BindAddress: You can support virtual hosts with this option. This directive : # is used to tell the server which IP address to listen to. It can either : # contain "*", an IP address, or a fully qualified Internet domain name. : # See also the <VirtualHost> and Listen directives. : # : #BindAddress * : : # : # Dynamic Shared Object (DSO) Support : # : # To be able to use the functionality of a module which was built as a DSO you : # have to place corresponding `LoadModule' lines at this location so the : # directives contained in it are actually available _before_ they are used. : # Please read the file http://httpd.apache.org/docs/dso.html for more : # details about the DSO mechanism and run `httpd -l' for the list of already : # built-in (statically linked and thus always available) modules in your httpd : # binary. : # : # Note: The order in which modules are loaded is important. Don't change : # the order below without expert advice. : # : # Example: : # LoadModule foo_module modules/mod_foo.so : : #LoadModule mmap_static_module modules/mod_mmap_static.so : LoadModule vhost_alias_module modules/mod_vhost_alias.so : <IfDefine HAVE_BANDWIDTH> : LoadModule bandwidth_module modules/mod_bandwidth.so : </IfDefine> : <IfDefine HAVE_THROTTLE> : LoadModule throttle_module modules/mod_throttle.so : </IfDefine> : LoadModule env_module modules/mod_env.so : LoadModule config_log_module modules/mod_log_config.so : LoadModule agent_log_module modules/mod_log_agent.so : LoadModule referer_log_module modules/mod_log_referer.so : #LoadModule mime_magic_module modules/mod_mime_magic.so : LoadModule mime_module modules/mod_mime.so : LoadModule negotiation_module modules/mod_negotiation.so : LoadModule status_module modules/mod_status.so : LoadModule info_module modules/mod_info.so : LoadModule includes_module modules/mod_include.so : LoadModule autoindex_module modules/mod_autoindex.so : LoadModule dir_module modules/mod_dir.so : LoadModule cgi_module modules/mod_cgi.so : LoadModule asis_module modules/mod_asis.so : LoadModule imap_module modules/mod_imap.so : LoadModule action_module modules/mod_actions.so : #LoadModule speling_module modules/mod_speling.so : LoadModule userdir_module modules/mod_userdir.so : LoadModule alias_module modules/mod_alias.so : LoadModule rewrite_module modules/mod_rewrite.so : LoadModule access_module modules/mod_access.so : LoadModule auth_module modules/mod_auth.so : LoadModule anon_auth_module modules/mod_auth_anon.so : LoadModule db_auth_module modules/mod_auth_db.so : #LoadModule auth_any_module modules/mod_auth_any.so : #LoadModule dbm_auth_module modules/mod_auth_dbm.so : #LoadModule auth_ldap_module modules/mod_auth_ldap.so : #LoadModule mysql_auth_module modules/mod_auth_mysql.so : #LoadModule auth_pgsql_module modules/mod_auth_pgsql.so : #LoadModule digest_module modules/mod_digest.so : #LoadModule proxy_module modules/libproxy.so : #LoadModule cern_meta_module modules/mod_cern_meta.so : LoadModule expires_module modules/mod_expires.so : LoadModule headers_module modules/mod_headers.so : #LoadModule usertrack_module modules/mod_usertrack.so : #LoadModule example_module modules/mod_example.so : #LoadModule unique_id_module modules/mod_unique_id.so : LoadModule setenvif_module modules/mod_setenvif.so : <IfDefine HAVE_PERL> : LoadModule perl_module modules/libperl.so : </IfDefine> : <IfDefine HAVE_PHP> : LoadModule php_module modules/mod_php.so : </IfDefine> : <IfDefine HAVE_PHP3> : LoadModule php3_module modules/libphp3.so : </IfDefine> : <IfDefine HAVE_PHP4> : LoadModule php4_module modules/libphp4.so : </IfDefine> : <IfDefine HAVE_DAV> : LoadModule dav_module modules/libdav.so : </IfDefine> : <IfDefine HAVE_ROAMING> : LoadModule roaming_module modules/mod_roaming.so : </IfDefine> : <IfDefine HAVE_SSL> : LoadModule ssl_module modules/libssl.so : </IfDefine> : <IfDefine HAVE_PUT> : LoadModule put_module modules/mod_put.so : </IfDefine> : <IfDefine HAVE_PYTHON> : LoadModule python_module modules/mod_python.so : </IfDefine> : : # Reconstruction of the complete module list from all available modules : # (static and shared ones) to achieve correct module execution order. : # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE : THIS, TOO] : ClearModuleList : #AddModule mod_mmap_static.c : AddModule mod_vhost_alias.c : <IfDefine HAVE_BANDWIDTH> : AddModule mod_bandwidth.c : </IfDefine> : <IfDefine HAVE_THROTTLE> : AddModule mod_throttle.c : </IfDefine> : AddModule mod_env.c : AddModule mod_log_config.c : AddModule mod_log_agent.c : AddModule mod_log_referer.c : #AddModule mod_mime_magic.c : AddModule mod_mime.c : AddModule mod_negotiation.c : AddModule mod_status.c : AddModule mod_info.c : AddModule mod_include.c : AddModule mod_autoindex.c : AddModule mod_dir.c : AddModule mod_cgi.c : AddModule mod_asis.c : AddModule mod_imap.c : AddModule mod_actions.c : #AddModule mod_speling.c : AddModule mod_userdir.c : AddModule mod_alias.c : AddModule mod_rewrite.c : AddModule mod_access.c : AddModule mod_auth.c : AddModule mod_auth_anon.c : AddModule mod_auth_db.c : #AddModule mod_auth_any.c : #AddModule mod_auth_dbm.c : #AddModule auth_ldap.c : #AddModule mod_auth_mysql.c : #AddModule mod_auth_pgsql.c : #AddModule mod_digest.c : #AddModule mod_proxy.c : #AddModule mod_cern_meta.c : AddModule mod_expires.c : AddModule mod_headers.c : #AddModule mod_usertrack.c : #AddModule mod_example.c : #AddModule mod_unique_id.c : AddModule mod_so.c : AddModule mod_setenvif.c : <IfDefine HAVE_PERL> : AddModule mod_perl.c : </IfDefine> : <IfDefine HAVE_PHP> : AddModule mod_php.c : </IfDefine> : <IfDefine HAVE_PHP3> : AddModule mod_php3.c : </IfDefine> : <IfDefine HAVE_PHP4> : AddModule mod_php4.c : </IfDefine> : <IfDefine HAVE_DAV> : AddModule mod_dav.c : </IfDefine> : <IfDefine HAVE_ROAMING> : AddModule mod_roaming.c : </IfDefine> : <IfDefine HAVE_SSL> : AddModule mod_ssl.c : </IfDefine> : <IfDefine HAVE_PUT> : AddModule mod_put.c : </IfDefine> : <IfDefine HAVE_PYTHON> : AddModule mod_python.c : </IfDefine> : : # : # ExtendedStatus controls whether Apache will generate "full" status : # information (ExtendedStatus On) or just basic information (ExtendedStatus : # Off) when the "server-status" handler is called. The default is Off. : # : #ExtendedStatus On : : ### Section 2: 'Main' server configuration : # : # The directives in this section set up the values used by the 'main' : # server, which responds to any requests that aren't handled by a : # <VirtualHost> definition. These values also provide defaults for : # any <VirtualHost> containers you may define later in the file. : # : # All of these directives may appear inside <VirtualHost> containers, : # in which case these default settings will be overridden for the : # virtual host being defined. : # : : # : # If your ServerType directive (set earlier in the 'Global Environment' : # section) is set to "inetd", the next few directives don't have any : # effect since their settings are defined by the inetd configuration. : # Skip ahead to the ServerAdmin directive. : # : : # : # Port: The port to which the standalone server listens. For : # ports < 1023, you will need httpd to be run as root initially. : # : Port 8880 : : ## : ## SSL Support : ## : ## When we also provide SSL we have to listen to the : ## standard HTTP port (see above) and to the HTTPS port : ## : <IfDefine HAVE_SSL> : Listen 8880 : </IfDefine> : : # : # If you wish httpd to run as a different user or group, you must run : # httpd as root initially and it will switch. : # : # User/Group: The name (or #number) of the user/group to run httpd as. : # . On SCO (ODT 3) use "User nouser" and "Group nogroup". : # . On HPUX you may not be able to use shared memory as nobody, and the : # suggested workaround is to create a user www and use that user. : # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) : # when the value of (unsigned)Group is above 60000; : # don't use Group "#-1" on these systems! : # : User nobody : Group nobody : : # : # ServerAdmin: Your address, where problems with the server should be : # e-mailed. This address appears on some server-generated pages, such : # as error documents. : # : ServerAdmin root at localhoast.localdomain : : # : # ServerName allows you to set a host name which is sent back to clients for : # your server if it's different than the one the program would get (i.e., use : # "www" instead of the host's real name). : # : # Note: You cannot just invent host names and hope they work. The name you : # define here must be a valid DNS name for your host. If you don't understand : # this, ask your network administrator. : # If your host doesn't have a registered DNS name, enter its IP address here. : # You will have to access it by its address (e.g., http://123.45.67.89/) : # anyway, and this will make redirections work in a sensible way. : # : # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your : # machine always knows itself by this address. If you use Apache strictly for : # local testing and development, you may use 127.0.0.1 as the server name. : # : #ServerName localhost : ServerName nudi.d2g.com : # : # DocumentRoot: The directory out of which you will serve your : # documents. By default, all requests are taken from this directory, but : # symbolic links and aliases may be used to point to other locations. : # : DocumentRoot "/var/www/html" : : # : # Each directory to which Apache has access, can be configured with respect : # to which services and features are allowed and/or disabled in that : # directory (and its subdirectories). : # : # First, we configure the "default" to be a very restrictive set of : # permissions. : # : <Directory /> : Options FollowSymLinks : AllowOverride None : </Directory> : : # : # Note that from this point forward you must specifically allow : # particular features to be enabled - so if something's not working as : # you might expect, make sure that you have specifically enabled it : # below. : # : : # : # This should be changed to whatever you set DocumentRoot to. : # : <Directory "/var/www/html"> : : # : # This may also be "None", "All", or any combination of "Indexes", : # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". : # : # Note that "MultiViews" must be named *explicitly* --- "Options All" : # doesn't give it to you. : # : Options Indexes FollowSymLinks MultiViews : : # : # This controls which options the .htaccess files in directories can : # override. Can also be "All", or any combination of "Options", "FileInfo", : # "AuthConfig", and "Limit" : # : AllowOverride None : : # : # Controls who can get stuff from this server. : # : Order allow,deny : Allow from all : </Directory> : : # : # UserDir: The name of the directory which is appended onto a user's home : # directory if a ~user request is received. : # : # The path to the end user account 'public_html' directory must be : # accessible to the webserver userid. This usually means that ~userid : # must have permissions of 711, ~userid/public_html must have permissions : # of 755, and documents contained therein must be world-readable. : # Otherwise, the client will only receive a "403 Forbidden" message. : # : # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden : # : <IfModule mod_userdir.c> : UserDir public_html : </IfModule> : : # : # Control access to UserDir directories. The following is an example : # for a site where these directories are restricted to read-only. : # : <Directory /home/*/public_html> : AllowOverride FileInfo AuthConfig Limit : Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec : <Limit GET POST OPTIONS PROPFIND> : Order allow,deny : Allow from all : </Limit> : <LimitExcept GET POST OPTIONS PROPFIND> : Order deny,allow : Deny from all : </LimitExcept> : </Directory> : : # : # DirectoryIndex: Name of the file or files to use as a pre-written HTML : # directory index. Separate multiple entries with spaces. : # : <IfModule mod_dir.c> : DirectoryIndex index.html index.htm index.shtml index.php index.php4 : index.php3 index.phtml index.cgi : </IfModule> : : # : # AccessFileName: The name of the file to look for in each directory : # for access control information. : # : AccessFileName .htaccess : : # : # The following lines prevent .htaccess files from being viewed by : # Web clients. Since .htaccess files often contain authorization : # information, access is disallowed for security reasons. Comment : # these lines out if you want Web visitors to see the contents of : # .htaccess files. If you change the AccessFileName directive above, : # be sure to make the corresponding changes here. : # : # Also, folks tend to use names such as .htpasswd for password : # files, so this will protect those as well. : # : <Files ~ "^.ht"> : Order allow,deny : Deny from all : </Files> : : # : # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each : # document that was negotiated on the basis of content. This asks proxy : # servers not to cache the document. Uncommenting the following line disables : # this behavior, and proxies will be allowed to cache the documents. : # : #CacheNegotiatedDocs : : # : # UseCanonicalName: (new for 1.3) With this setting turned on, whenever : # Apache needs to construct a self-referencing URL (a URL that refers back : # to the server the response is coming from) it will use ServerName and : # Port to form a "canonical" name. With this setting off, Apache will : # use the hostname:port that the client supplied, when possible. This : # also affects SERVER_NAME and SERVER_PORT in CGI scripts. : # : UseCanonicalName On : : # : # TypesConfig describes where the mime.types file (or equivalent) is : # to be found. : # : <IfModule mod_mime.c> : TypesConfig /etc/mime.types : </IfModule> : : # : # DefaultType is the default MIME type the server will use for a document : # if it cannot otherwise determine one, such as from filename extensions. : # If your server contains mostly text or HTML documents, "text/plain" is : # a good value. If most of your content is binary, such as applications : # or images, you may want to use "application/octet-stream" instead to : # keep browsers from trying to display binary files as though they are : # text. : # : DefaultType text/plain : : # : # The mod_mime_magic module allows the server to use various hints from the : # contents of the file itself to determine its type. The MIMEMagicFile : # directive tells the module where the hint definitions are located. : # mod_mime_magic is not part of the default server (you have to add : # it yourself with a LoadModule [see the DSO paragraph in the 'Global : # Environment' section], or recompile the server and include mod_mime_magic : # as part of the configuration), so it's enclosed in an <IfModule> container. : # This means that the MIMEMagicFile directive will only be processed if the : # module is part of the server. : # : <IfModule mod_mime_magic.c> : # MIMEMagicFile /usr/share/magic.mime : MIMEMagicFile conf/magic : </IfModule> : : # : # HostnameLookups: Log the names of clients or just their IP addresses : # e.g., www.apache.org (on) or 204.62.129.132 (off). : # The default is off because it'd be overall better for the net if people : # had to knowingly turn this feature on, since enabling it means that : # each client request will result in AT LEAST one lookup request to the : # nameserver. : # : HostnameLookups Off : : # : # ErrorLog: The location of the error log file. : # If you do not specify an ErrorLog directive within a <VirtualHost> : # container, error messages relating to that virtual host will be : # logged here. If you *do* define an error logfile for a <VirtualHost> : # container, that host's errors will be logged there and not here. : # : ErrorLog logs/error_log : : # : # LogLevel: Control the number of messages logged to the error_log. : # Possible values include: debug, info, notice, warn, error, crit, : # alert, emerg. : # : LogLevel warn : : # : # The following directives define some format nicknames for use with : # a CustomLog directive (see below). : # : LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" : combined : LogFormat "%h %l %u %t "%r" %>s %b" common : LogFormat "%{Referer}i -> %U" referer : LogFormat "%{User-agent}i" agent : : # : # The location and format of the access logfile (Common Logfile Format). : # If you do not define any access logfiles within a <VirtualHost> : # container, they will be logged here. Contrariwise, if you *do* : # define per-<VirtualHost> access logfiles, transactions will be : # logged therein and *not* in this file. : # : # CustomLog /var/log/httpd/access_log common : CustomLog logs/access_log combined : : # : # If you would like to have agent and referer logfiles, uncomment the : # following directives. : # : #CustomLog logs/referer_log referer : #CustomLog logs/agent_log agent : : # : # If you prefer a single logfile with access, agent, and referer information : # (Combined Logfile Format) you can use the following directive. : # : #CustomLog logs/access_log combined : : # : # Optionally add a line containing the server version and virtual host : # name to server-generated pages (error documents, FTP directory listings, : # mod_status and mod_info output etc., but not CGI generated documents). : # Set to "EMail" to also include a mailto: link to the ServerAdmin. : # Set to one of: On | Off | EMail : # : ServerSignature On : : # EBCDIC configuration: : # (only for mainframes using the EBCDIC codeset, currently one of: : # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!! : # The following default configuration assumes that "text files" : # are stored in EBCDIC (so that you can operate on them using the : # normal POSIX tools like grep and sort) while "binary files" are : # stored with identical octets as on an ASCII machine. : # : # The directives are evaluated in configuration file order, with : # the EBCDICConvert directives applied before EBCDICConvertByType. : # : # If you want to have ASCII HTML documents and EBCDIC HTML documents : # at the same time, you can use the file extension to force : # conversion off for the ASCII documents: : # > AddType text/html .ahtml : # > EBCDICConvert Off=InOut .ahtml : # : # EBCDICConvertByType On=InOut text/* message/* multipart/* : # EBCDICConvertByType On=In application/x-www-form-urlencoded : # EBCDICConvertByType On=InOut application/postscript model/vrml : # EBCDICConvertByType Off=InOut */* : : : # : # Aliases: Add here as many aliases as you need (with no limit). The format is : # Alias fakename realname : # : <IfModule mod_alias.c> : : # : # Note that if you include a trailing / on fakename then the server will : # require it to be present in the URL. So "/icons" isn't aliased in this : # example, only "/icons/". If the fakename is slash-terminated, then the : # realname must also be slash terminated, and if the fakename omits the : # trailing slash, the realname must also omit it. : # : Alias /icons/ "/var/www/icons/" : : <Directory "/var/www/icons"> : Options Indexes MultiViews : AllowOverride None : Order allow,deny : Allow from all : </Directory> : : # This Alias will project the on-line documentation tree under /manual/ : # even if you change the DocumentRoot. Comment it if you don't want to : # provide access to the on-line documentation. : # : # Alias /manual/ "/etc/httpd/htdocs/manual/" : # : # <Directory "/etc/httpd/htdocs/manual"> : # Options Indexes FollowSymlinks MultiViews : # AllowOverride None : # Order allow,deny : # Allow from all : # </Directory> : : # : # ScriptAlias: This controls which directories contain server scripts. : # ScriptAliases are essentially the same as Aliases, except that : # documents in the realname directory are treated as applications and : # run by the server when requested rather than as documents sent to the client. : # The same rules about trailing "/" apply to ScriptAlias directives as to : # Alias. : # : ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" : : # : # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased : # CGI directory exists, if you have that configured. : # : <Directory "/var/www/cgi-bin"> : AllowOverride None : Options None : Order allow,deny : Allow from all : </Directory> : : </IfModule> : # End of aliases. : : # : # Redirect allows you to tell clients about documents which used to exist in : # your server's namespace, but do not anymore. This allows you to tell the : # clients where to look for the relocated document. : # Format: Redirect old-URI new-URL : # : : # : # Directives controlling the display of server-generated directory listings. : # : <IfModule mod_autoindex.c> : : # : # FancyIndexing is whether you want fancy directory indexing or standard : # : IndexOptions FancyIndexing NameWidth=* : : # : # AddIcon* directives tell the server which icon to show for different : # files or filename extensions. These are only displayed for : # FancyIndexed directories. : # : AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip : : AddIconByType (TXT,/icons/text.gif) text/* : AddIconByType (IMG,/icons/image2.gif) image/* : AddIconByType (SND,/icons/sound2.gif) audio/* : AddIconByType (VID,/icons/movie.gif) video/* : : AddIcon /icons/binary.gif .bin .exe : AddIcon /icons/binhex.gif .hqx : AddIcon /icons/tar.gif .tar : AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv : AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip : AddIcon /icons/a.gif .ps .ai .eps : AddIcon /icons/layout.gif .html .shtml .htm .pdf : AddIcon /icons/text.gif .txt : AddIcon /icons/c.gif .c : AddIcon /icons/p.gif .pl .py : AddIcon /icons/f.gif .for : AddIcon /icons/dvi.gif .dvi : AddIcon /icons/uuencoded.gif .uu : AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl : AddIcon /icons/tex.gif .tex : AddIcon /icons/bomb.gif core : : AddIcon /icons/back.gif .. : AddIcon /icons/hand.right.gif README : AddIcon /icons/folder.gif ^^DIRECTORY^^ : AddIcon /icons/blank.gif ^^BLANKICON^^ : : # : # DefaultIcon is which icon to show for files which do not have an icon : # explicitly set. : # : DefaultIcon /icons/unknown.gif : : # : # AddDescription allows you to place a short description after a file in : # server-generated indexes. These are only displayed for FancyIndexed : # directories. : # Format: AddDescription "description" filename : # : #AddDescription "GZIP compressed document" .gz : #AddDescription "tar archive" .tar : #AddDescription "GZIP compressed tar archive" .tgz : : # : # ReadmeName is the name of the README file the server will look for by : # default, and append to directory listings. : # : # HeaderName is the name of a file which should be prepended to : # directory indexes. : # : # If MultiViews are amongst the Options in effect, the server will : # first look for name.html and include it if found. If name.html : # doesn't exist, the server will then look for name.txt and include : # it as plaintext if found. : # : ReadmeName README : HeaderName HEADER : : # : # IndexIgnore is a set of filenames which directory indexing should ignore : # and not include in the listing. Shell-style wildcarding is permitted. : # : IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t : : </IfModule> : # End of indexing directives. : : # : # Document types. : # : <IfModule mod_mime.c> : : # : # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress : # information on the fly. Note: Not all browsers support this. : # Despite the name similarity, the following Add* directives have nothing : # to do with the FancyIndexing customization directives above. : # : AddEncoding x-compress Z : AddEncoding x-gzip gz tgz : : # : # AddLanguage allows you to specify the language of a document. You can : # then use content negotiation to give a browser a file in a language : # it can understand. : # : # Note 1: The suffix does not have to be the same as the language : # keyword --- those with documents in Polish (whose net-standard : # language code is pl) may wish to use "AddLanguage pl .po" to : # avoid the ambiguity with the common suffix for perl scripts. : # : # Note 2: The example entries below illustrate that in quite : # some cases the two character 'Language' abbreviation is not : # identical to the two character 'Country' code for its country, : # E.g. 'Danmark/dk' versus 'Danish/da'. : # : # Note 3: In the case of 'ltz' we violate the RFC by using a three char : # specifier. But there is 'work in progress' to fix this and get : # the reference data for rfc1766 cleaned up. : # : # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) : # French (fr) - German (de) - Greek-Modern (el) : # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) : # Portugese (pt) - Luxembourgeois* (ltz) : # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) : # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) : # Russian (ru) : # : AddLanguage da .dk : AddLanguage nl .nl : AddLanguage en .en : AddLanguage et .ee : AddLanguage fr .fr : AddLanguage de .de : AddLanguage el .el : AddLanguage he .he : AddCharset ISO-8859-8 .iso8859-8 : AddLanguage it .it : AddLanguage ja .ja : AddCharset ISO-2022-JP .jis : AddLanguage kr .kr : AddCharset ISO-2022-KR .iso-kr : AddLanguage nn .nn : AddLanguage no .no : AddLanguage pl .po : AddCharset ISO-8859-2 .iso-pl : AddLanguage pt .pt : AddLanguage pt-br .pt-br : AddLanguage ltz .lu : AddLanguage ca .ca : AddLanguage es .es : AddLanguage sv .se : AddLanguage cz .cz : AddLanguage ru .ru : AddLanguage zh-tw .tw : AddLanguage tw .tw : AddCharset Big5 .Big5 .big5 : AddCharset WINDOWS-1251 .cp-1251 : AddCharset CP866 .cp866 : AddCharset ISO-8859-5 .iso-ru : AddCharset KOI8-R .koi8-r : AddCharset UCS-2 .ucs2 : AddCharset UCS-4 .ucs4 : AddCharset UTF-8 .utf8 : : # LanguagePriority allows you to give precedence to some languages : # in case of a tie during content negotiation. : # : # Just list the languages in decreasing order of preference. We have : # more or less alphabetized them here. You probably want to change this. : # : <IfModule mod_negotiation.c> : LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw : </IfModule> : : # : # AddType allows you to tweak mime.types without actually editing it, or to : # make certain files to be certain types. : # : # For example, the PHP 3.x module (not part of the Apache distribution - see : # http://www.php.net) will typically use: : # : <IfModule mod_php3.c> : AddType application/x-httpd-php3 .php3 : AddType application/x-httpd-php3-source .phps : </IfModule> : # : # And for PHP 4.x, use: : # : <IfModule mod_php4.c> : AddType application/x-httpd-php .php .php4 .php3 .phtml .ph : AddType application/x-httpd-php-source .phps : </IfModule> : : # : # For PHP/FI (PHP2), use: : # : <IfModule mod_php.c> : AddType application/x-httpd-php .phtml : </IfModule> : : AddType application/x-tar .tgz : : # : # AddHandler allows you to map certain file extensions to "handlers", : # actions unrelated to filetype. These can be either built into the server : # or added with the Action command (see below) : # : # If you want to use server side includes, or CGI outside : # ScriptAliased directories, uncomment the following lines. : # : # To use CGI scripts: : # : #AddHandler cgi-script .cgi : : # : # To use server-parsed HTML files : # : AddType text/html .shtml : AddHandler server-parsed .shtml : : # : # Uncomment the following line to enable Apache's send-asis HTTP file : # feature : # : #AddHandler send-as-is asis : : # : # If you wish to use server-parsed imagemap files, use : # : AddHandler imap-file map : : # : # To enable type maps, you might want to use : # : #AddHandler type-map var : : </IfModule> : # End of document types. : : # : # Action lets you define media types that will execute a script whenever : # a matching file is called. This eliminates the need for repeated URL : # pathnames for oft-used CGI file processors. : # Format: Action media/type /cgi-script/location : # Format: Action handler-name /cgi-script/location : # : : # : # MetaDir: specifies the name of the directory in which Apache can find : # meta information files. These files contain additional HTTP headers : # to include when sending the document : # : #MetaDir .web : : # : # MetaSuffix: specifies the file name suffix for the file containing the : # meta information. : # : #MetaSuffix .meta : : # : # Customizable error response (Apache style) : # these come in three flavors : # : # 1) plain text : #ErrorDocument 500 "The server made a boo boo. : # n.b. the single leading (") marks it as text, it does not get output : # : # 2) local redirects : #ErrorDocument 404 /missing.html : # to redirect to local URL /missing.html : #ErrorDocument 404 /cgi-bin/missing_handler.pl : # N.B.: You can redirect to a script or a document using server-side-includes. : # : # 3) external redirects : #ErrorDocument 402 http://some.other_server.com/subscription_info.html : # N.B.: Many of the environment variables associated with the original : # request will *not* be available to such a script. : : # : # Customize behaviour based on the browser : # : <IfModule mod_setenvif.c> : : # : # The following directives modify normal HTTP response behavior. : # The first directive disables keepalive for Netscape 2.x and browsers that : # spoof it. There are known problems with these browser implementations. : # The second directive is for Microsoft Internet Explorer 4.0b2 : # which has a broken HTTP/1.1 implementation and does not properly : # support keepalive when it is used on 301 or 302 (redirect) responses. : # : BrowserMatch "Mozilla/2" nokeepalive : BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 : : # : # The following directive disables HTTP/1.1 responses to browsers which : # are in violation of the HTTP/1.0 spec by not being able to grok a : # basic 1.1 response. : # : BrowserMatch "RealPlayer 4.0" force-response-1.0 : BrowserMatch "Java/1.0" force-response-1.0 : BrowserMatch "JDK/1.0" force-response-1.0 : : </IfModule> : # End of browser customization directives : : # : # If the perl module is installed, this will allow execution of mod_perl : # to compile your scripts to subroutines which it will execute directly, : # avoiding the costly compile process for most requests. : # : #<IfModule mod_perl.c> : # Alias /perl /var/www/perl : # <Directory /var/www/perl> : # SetHandler perl-script : # PerlHandler Apache::Registry : # Options +ExecCGI : # </Directory> : #</IfModule> : : # : # Allow http put (such as Netscape Gold's publish feature) : # Use htpasswd to generate /etc/httpd/conf/passwd. : # : #<IfModule mod_put.c> : # Alias /upload /tmp : # <Directory /tmp> : # EnablePut On : # AuthType Basic : # AuthName Temporary : # AuthUserFile /etc/httpd/conf/passwd : # EnableDelete Off : # umask 007 : # <Limit PUT> : # require valid-user : # </Limit> : # </Directory> : #</IfModule> : : # : # Allow server status reports, with the URL of http://servername/server-status : # Change the ".your_domain.com" to match your domain to enable. : # : #<Location /server-status> : # SetHandler server-status : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : #</Location> : : # : # Allow remote server configuration reports, with the URL of : # http://servername/server-info (requires that mod_info.c be loaded). : # Change the ".your_domain.com" to match your domain to enable. : # : #<Location /server-info> : # SetHandler server-info : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : #</Location> : : # : # Allow access to local system documentation from localhost : # : Alias /doc/ /usr/share/doc/ : <Directory /usr/share/doc> : order deny,allow : deny from all : allow from localhost .localdomain : Options Indexes FollowSymLinks : </Directory> : : # : # There have been reports of people trying to abuse an old bug from pre-1.1 : # days. This bug involved a CGI script distributed as a part of Apache. : # By uncommenting these lines you can redirect these attacks to a logging : # script on phf.apache.org. Or, you can record them yourself, using the script : # support/phf_abuse_log.cgi. : # : #<Location /cgi-bin/phf*> : # Deny from all : # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi : #</Location> : : # : # Proxy Server directives. Uncomment the following lines to : # enable the proxy server: : # : #<IfModule mod_proxy.c> : # ProxyRequests On : : # <Directory proxy:*> : # Order deny,allow : # Deny from all : # Allow from .your_domain.com : # </Directory> : : # : # Enable/disable the handling of HTTP/1.1 "Via:" headers. : # ("Full" adds the server version; "Block" removes all outgoing Via: headers) : # Set to one of: Off | On | Full | Block : # : # ProxyVia On : : # : # To enable the cache as well, edit and uncomment the following lines: : # (no caching without CacheRoot) : # : # CacheRoot "/var/cache/httpd" : # CacheSize 5 : # CacheGcInterval 4 : # CacheMaxExpire 24 : # CacheLastModifiedFactor 0.1 : # CacheDefaultExpire 1 : # NoCache a_domain.com another_domain.edu joes.garage_sale.com : : #</IfModule> : # End of proxy directives. : : ### Section 3: Virtual Hosts : # : # VirtualHost: If you want to maintain multiple domains/hostnames on your : # machine you can setup VirtualHost containers for them. Most configurations : # use only name-based virtual hosts so the server doesn't need to worry about : # IP addresses. This is indicated by the asterisks in the directives below. : # : # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> : # for further details before you try to setup virtual hosts. : # : # You may use the command line option '-S' to verify your virtual host : # configuration. : : # : # Use name-based virtual hosting. : # : #NameVirtualHost * : : # : # VirtualHost example: : # Almost any Apache directive may go into a VirtualHost container. : # The first VirtualHost section is used for requests without a known : # server name. : # : #<VirtualHost *> : # ServerAdmin webmaster at : dummy-host.example.com : # DocumentRoot /www/docs/dummy-host.example.com : # ServerName dummy-host.example.com : # ErrorLog logs/dummy-host.example.com-error_log : # CustomLog logs/dummy-host.example.com-access_log common : #</VirtualHost> : : #<VirtualHost _default_:*> : #</VirtualHost> : : ## : ## SSL Global Context : ## : ## All SSL configuration in this context applies both to : ## the main server and all SSL-enabled virtual hosts. : ## : : # : # Some MIME-types for downloading Certificates and CRLs : # : <IfDefine HAVE_SSL> : AddType application/x-x509-ca-cert .crt : AddType application/x-pkcs7-crl .crl : </IfDefine> : : <IfModule mod_ssl.c> : : # Pass Phrase Dialog: : # Configure the pass phrase gathering process. : # The filtering dialog program (`builtin' is a internal : # terminal dialog) has to provide the pass phrase on stdout. : SSLPassPhraseDialog builtin : : # Inter-Process Session Cache: : # Configure the SSL Session Cache: First the mechanism : # to use and second the expiring timeout (in seconds). : #SSLSessionCache none : #SSLSessionCache shmht:logs/ssl_scache(512000) : #SSLSessionCache shmcb:logs/ssl_scache(512000) : SSLSessionCache shm:logs/ssl_scache(512000) : SSLSessionCacheTimeout 300 : : # Semaphore: : # Configure the path to the mutual exclusion semaphore the : # SSL engine uses internally for inter-process synchronization. : SSLMutex file:logs/ssl_mutex : : # Pseudo Random Number Generator (PRNG): : # Configure one or more sources to seed the PRNG of the : # SSL library. The seed data should be of good random quality. : # WARNING! On some platforms /dev/random blocks if not enough entropy : # is available. This means you then cannot use the /dev/random device : # because it would lead to very long connection times (as long as : # it requires to make more entropy available). But usually those : # platforms additionally provide a /dev/urandom device which doesn't : # block. So, if available, use this one instead. Read the mod_ssl User : # Manual for more details. : SSLRandomSeed startup builtin : SSLRandomSeed connect builtin : #SSLRandomSeed startup file:/dev/random 512 : #SSLRandomSeed startup file:/dev/urandom 512 : #SSLRandomSeed connect file:/dev/random 512 : #SSLRandomSeed connect file:/dev/urandom 512 : : # Logging: : # The home of the dedicated SSL protocol logfile. Errors are : # additionally duplicated in the general error log file. Put : # this somewhere where it cannot be used for symlink attacks on : # a real server (i.e. somewhere where only root can write). : # Log levels are (ascending order: higher ones include lower ones): : # none, error, warn, info, trace, debug. : SSLLog logs/ssl_engine_log : SSLLogLevel error : : </IfModule> : : <IfDefine HAVE_SSL> : : ## : ## SSL Virtual Host Context : ## : : <VirtualHost _default_:443> : : # General setup for the virtual host : #DocumentRoot "/etc/httpd/htdocs" : #ServerName new.host.name : #ServerAdmin you at your.address : ErrorLog logs/error_log : TransferLog logs/access_log : : # SSL Engine Switch: : # Enable/Disable SSL for this virtual host. : SSLEngine on : : # SSL Cipher Suite: : # List the ciphers that the client is permitted to negotiate. : # See the mod_ssl documentation for a complete list. : #SSLCipherSuite : ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL : : # Server Certificate: : # Point SSLCertificateFile at a PEM encoded certificate. If : # the certificate is encrypted, then you will be prompted for a : # pass phrase. Note that a kill -HUP will prompt again. A test : # certificate can be generated with `make certificate' under : # built time. Keep in mind that if you've both a RSA and a DSA : # certificate you can configure both in parallel (to also allow : # the use of DSA ciphers, etc.) : SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt : #SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt : : # Server Private Key: : # If the key is not combined with the certificate, use this : # directive to point at the key file. Keep in mind that if : # you've both a RSA and a DSA private key you can configure : # both in parallel (to also allow the use of DSA ciphers, etc.) : SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key : #SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key : : # Server Certificate Chain: : # Point SSLCertificateChainFile at a file containing the : # concatenation of PEM encoded CA certificates which form the : # certificate chain for the server certificate. Alternatively : # the referenced file can be the same as SSLCertificateFile : # when the CA certificates are directly appended to the server : # certificate for convinience. : #SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt : : # Certificate Authority (CA): : # Set the CA certificate verification path where to find CA : # certificates for client authentication or alternatively one : # huge file containing all of them (file must be PEM encoded) : # Note: Inside SSLCACertificatePath you need hash symlinks : # to point to the certificate files. Use the provided : # Makefile to update the hash symlinks after changes. : #SSLCACertificatePath /etc/httpd/conf/ssl.crt : #SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt : : # Certificate Revocation Lists (CRL): : # Set the CA revocation path where to find CA CRLs for client : # authentication or alternatively one huge file containing all : # of them (file must be PEM encoded) : # Note: Inside SSLCARevocationPath you need hash symlinks : # to point to the certificate files. Use the provided : # Makefile to update the hash symlinks after changes. : #SSLCARevocationPath /etc/httpd/conf/ssl.crl : #SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl : : # Client Authentication (Type): : # Client certificate verification type and depth. Types are : # none, optional, require and optional_no_ca. Depth is a : # number which specifies how deeply to verify the certificate : # issuer chain before deciding the certificate is not valid. : #SSLVerifyClient require : #SSLVerifyDepth 10 : : # Access Control: : # With SSLRequire you can do per-directory access control based : # on arbitrary complex boolean expressions containing server : # variable checks and other lookup directives. The syntax is a : # mixture between C and Perl. See the mod_ssl documentation : # for more details. : #<Location /> : #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ : # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." : # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} : # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 : # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) : # or %{REMOTE_ADDR} =~ m/^192.76.162.[0-9]+$/ : #</Location> : : # SSL Engine Options: : # Set various options for the SSL engine. : # o FakeBasicAuth: : # Translate the client X.509 into a Basic Authorisation. This means that : # the standard Auth/DBMAuth methods can be used for access control. The : # user name is the `one line' version of the client's X.509 certificate. : # Note that no password is obtained from the user. Every entry in the user : # file needs this password: `xxj31ZMTZzkVA'. : # o ExportCertData: : # This exports two additional environment variables: SSL_CLIENT_CERT and : # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the : # server (always existing) and the client (only existing when client : # authentication is used). This can be used to import the certificates : # into CGI scripts. : # o StdEnvVars: : # This exports the standard SSL/TLS related `SSL_*' environment variables. : # Per default this exportation is switched off for performance reasons, : # because the extraction step is an expensive operation and is usually : # useless for serving static content. So one usually enables the : # exportation for CGI and SSI requests only. : # o CompatEnvVars: : # This exports obsolete environment variables for backward compatibility : # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this : # to provide compatibility to existing CGI scripts. : # o StrictRequire: : # This denies access when "SSLRequireSSL" or "SSLRequire" applied even : # under a "Satisfy any" situation, i.e. when it applies access is denied : # and no other module can change it. : # o OptRenegotiate: : # This enables optimized SSL connection renegotiation handling when SSL : # directives are used in per-directory context. : #SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire : <Files ~ ".(cgi|shtml|phtml|php3?)$"> : SSLOptions +StdEnvVars : </Files> : <Directory "/var/www/cgi-bin"> : SSLOptions +StdEnvVars : </Directory> : : # SSL Protocol Adjustments: : # The safe and default but still SSL/TLS standard compliant shutdown : # approach is that mod_ssl sends the close notify alert but doesn't wait for : # the close notify alert from client. When you need a different shutdown : # approach you can use one of the following variables: : # o ssl-unclean-shutdown: : # This forces an unclean shutdown when the connection is closed, i.e. no : # SSL close notify alert is send or allowed to received. This violates : # the SSL/TLS standard but is needed for some brain-dead browsers. Use : # this when you receive I/O errors because of the standard approach where : # mod_ssl sends the close notify alert. : # o ssl-accurate-shutdown: : # This forces an accurate shutdown when the connection is closed, i.e. a : # SSL close notify alert is send and mod_ssl waits for the close notify : # alert of the client. This is 100% SSL/TLS standard compliant, but in : # practice often causes hanging connections with brain-dead browsers. Use : # this only for browsers where you know that their SSL implementation : # works correctly. : # Notice: Most problems of broken clients are also related to the HTTP : # keep-alive facility, so you usually additionally want to disable : # keep-alive for those clients, too. Use variable "nokeepalive" for this. : # Similarly, one has to force some clients to use HTTP/1.0 to workaround : # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and : # "force-response-1.0" for this. : SetEnvIf User-Agent ".*MSIE.*" : nokeepalive ssl-unclean-shutdown : downgrade-1.0 force-response-1.0 : : # Per-Server Logging: : # The home of a custom SSL log file. Use this when you want a : # compact non-error SSL logfile on a virtual host basis. : CustomLog logs/ssl_request_log : "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x "%r" %b" : : </VirtualHost> : : </IfDefine> : : -- : 으..뒷골이야.. 넘많이 DDR했어--열심히 삽질 하자 허접삽질 엽기 삽질 삶이 속일지라도 세상이 버릴지라도 난 포기 하지 않는다 http://xjoin.net:8880
Copyleft
1999-2026 by
JSBoard Open Project
Theme Designed by
IDOO
All right reserved