적수네 동네 - 질문과 답변 [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

리눅스와 윈도우환경입니다.
윈도우 클라이언트에서 리눅스 까지는 ping주고 받기가 다 되고요.
리눅스에서 인터넷 환경 까지도 ping이 잘됩니다. 물론 클라이언트한테 주는것도 잘되고요.
 rc.firewall 스크립트는 다음과 같습니다.
고수님들의 답변 부탁드립니다. ^^
 즐 리눅싱 하시길...
 #!/bin/sh
#
#rc.firewall - initial SIMPLE IP Masquerade test for 2.1.x and 2.2.x kernels
#using IPCHAINS 
#
#Load all required IP MASQ modules
#
# NOTE:	Only load the IP MASQ modules you need. All current IP MASQ modules
#	are shown below but are commented out from loading.
 #Needed to initially load modules
#
/sbin/depmod -a
#Supports the proper masquerading of FTP file transfers using the PORT method
#
/sbin/modprobe ip_masq_ftp
 #Supports the masquerading of RealAudio over UDP. Without this module,
#RealAudio Will function but in TCP mode. This can cause a reduction
#in sound quality.
/sbin/modprobe ip_masq_raudio
 #Supports the masquerading of IRC DCC file transfers
#
/sbin/modprobe ip_masq_irc
 #Supports the masquerading of Quake and QuakeWorld by default. This modules is
#	for multi users behind the Linux MASQ server. if you are going to play
#	Quake I, II, and III. use the second exsample.
#
#Quake I/ QuakeWorld (port 26000 and 27000)
/sbin/modprobe ip_masq_quake
#
#Quake I/II/III / QuakeWorld (port 26000, 27000, 27910, 27960)	 	
/sbin/modprobe ip_masq_quake port=26000,27000,27910,27960
 #Supports the masquerading of the CuSeeme Video conferencing software
#
/sbin/modprobe ip_masq_cuseeme
 #Supports the masquerading of the VDO-live video conferencing software
#
/sbin/modprobe ip_masq_vdolive
 #CRITICAL:Enable IP forwarding sice it is disable by default since
#	  Redhat user:	you may try changing the option in
#			/etc/sysconfig/network from: FORWARD_IPV4=false to
#						     FORWARD_IPV4=true
#
echo "1" > /proc/sys/net/ipv4/ip_forward
 #Dynamic IP users:
#
#If you get your IP address dynamically from SLIP, PPP, or DHCP enable this
#following option. This enables dynamic-ip address hacking in IP MASQ, making
#the life with Diald and similar programs much easier.
#
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
 #MASQ timeouts
#
#2 hrs timeout for TCP session timeouts
#10 sec timeout for traffic after the TCP/IP "FIN" packet is received
#160 sec timeout for UDP traffic (important for MASQ&#039;ed ICQ users)
/sbin/ipchains -M -S 7200 10 160
 #DHCP:	For people who receive their external IP address from either DHCP or
#	BOOTP such as ADSL or Cablemodem user, it is necessary to use the 
#	following befor the deny command. The "boot_client_net_if_name" should
#	be replaced the name of the link that the DHCP/BOOTP server will put an
#	address on to?
#
#	This example is currently commented out.
#
/sbin/ipchains -A input -j ACCEPT -i eth0 -s 0/0 67 -d 0/0 68 -p udp
 #Enable simple IP forwarding and Masquerading
#
#NOTE:	The following is an example for an internal LAN address in the
#	192.168.0.x network with a 255.255.255.0 or a "24" bit subnet mask.
#
#	Please change this network number and subnet mask to match your internal
#	LAN setup
#
/sbin/ipchains -P forward DENY
/sbin/ipchains -A forward -s 192.168.0.0/24 -j MASQ
 #Enable using soribada
#
echo "masq script succesfully running"
sleep 3