적수네 동네 - 질문과 답변 [ 게시물 수정 ]

	>> Edit article


			이름
			제목
			패스워드

Section "Monitor"
: Identifier "Monitor0"
: VendorName "Monitor Vendor"
: ModelName "Monitor Model"
: HorizSync 30-70
: VertRefresh 50-160
: 
: # -- 1400x1050 --
: # 1400x1050 @ 60Hz, 65.8 kHz hsync
: Modeline "1400x1050" 129 1400 1464 1656 1960
: 1050 1051 1054 1100 +HSync +VSync
: 
: # 1400x1050 @ 70Hz, 76.8 kHz hsync
: Modeline "1400x1050" 151 1400 1464 1656 1960
: 1050 1051 1054 1100 +HSync +VSync
: 
: # 1400x1050 @ 75Hz, 82.3 kHz hsync
: Modeline "1400x1050" 162 1400 1464 1656 1960
: 1050 1051 1054 1100 +HSync +VSync
: 
: # 1400x1050 @ 85Hz, 93.2 kHz hsync
: Modeline "1400x1050" 184 1400 1464 1656 1960
: 1050 1051 1054 1100 +HSync +VSync
: 
: EndSection
 이부분에 넣으라는 건가요?
그럼
 : # 1024x768 @ 85Hz, 93.2 kHz hsync
: Modeline "1024x768" 168 1024 1464 1656 1960
: 768 1051 1054 1100 +HSync +VSync
 뭐... 이런씩으로 넣어야 할까요?
 : Modeline "1024x768" 168 1024 1464 1656 1960
에서 168의 뜻은 뭔가요? 뒤에 1024 1464 1656 1960는 xvidtune에 나온데로
쓰면 된다지만...
 : 768 1051 1054 1100 +HSync +VSync
에서 +HSync +VSync 은 뭐인가요?
 갈켜주시면 감사하겠습니다. 그럼 좋은 하루 되세요...
     : 그냥 모니터 섹션에 추가해 넣으시면 됩니다.
: 
: : 제 해상도가 1024X768 에 85Hz 인데요... 보니까 1400X1050 밖에 없네요..
: : 이거 어쩌죠... 밑에 내용은 XF86Config-4 의 내용입니다.
: : 
: : # File generated by anaconda.
: : 
: : Section "ServerLayout"
: : Identifier "Anaconda Configured"
: : Screen 0 "Screen0" 0 0
: : InputDevice "Mouse0" "CorePointer"
: : InputDevice "Keyboard0" "CoreKeyboard"
: : EndSection
: : 
: : Section "Files"
: : 
: : # The location of the RGB database. Note, this is the name of the
: : # file minus the extension (like ".txt" or ".db"). There is normally
: : # no need to change the default.
: : 
: : RgbPath "/usr/X11R6/lib/X11/rgb"
: : 
: : # Multiple FontPath entries are allowed (they are concatenated 
: together)
: : # By default, Red Hat 6.0 and later now use a font server 
: independent of
: : # the X server to render fonts.
: : 
: : FontPath "unix/:7100"
: : 
: : EndSection
: : 
: : Section "Module"
: : Load "GLcore"
: : Load "dbe"
: : Load "extmod"
: : Load "fbdevhw"
: : Load "pex5"
: : Load "dri"
: : Load "glx"
: : Load "pex5"
: : Load "record"
: : Load "xie"
: : EndSection
: : 
: : Section "InputDevice"
: : Identifier "Keyboard0"
: : Driver "keyboard"
: : 
: : # Option "AutoRepeat" "500 5"
: : 
: : # when using XQUEUE, comment out the above line, and uncomment the
: : # following line
: : # Option "Protocol" "Xqueue"
: : 
: : # Specify which keyboard LEDs can be user-controlled (eg, with xset
: (1))
: : # Option "Xleds" "1 2 3"
: : 
: : # To disable the XKEYBOARD extension, uncomment XkbDisable.
: : # Option "XkbDisable"
: : 
: : # To customise the XKB settings to suit your keyboard, modify the
: : # lines below (which are the defaults). For example, for a non-U.S.
: : # keyboard, you will probably want to use:
: : # Option "XkbModel" "pc102"
: : # If you have a US Microsoft Natural keyboard, you can use:
: : # Option "XkbModel" "microsoft"
: : #
: : # Then to change the language, change the Layout setting.
: : # For example, a german layout can be obtained with:
: : # Option "XkbLayout" "de"
: : # or:
: : # Option "XkbLayout" "de"
: : # Option "XkbVariant" "nodeadkeys"
: : #
: : # If you&#039;d like to switch the positions of your capslock and
: : # control keys, use:
: : # Option "XkbOptions" "ctrl:nocaps"
: : Option "XkbRules" "xfree86"
: : Option "XkbModel" "pc105"
: : Option "XkbLayout" "us"
: : #Option "XkbVariant" ""
: : #Option "XkbOptions" ""
: : EndSection
: : 
: : Section "InputDevice"
: : Identifier "Mouse0"
: : Driver "mouse"
: : Option "Protocol" "IMPS/2"
: : Option "Device" "/dev/input/mice"
: : Option "ZAxisMapping" "4 5"
: : Option "Emulate3Buttons" "no"
: : EndSection
: : 
: : Section "Monitor"
: : Identifier "Monitor0"
: : VendorName "Monitor Vendor"
: : ModelName "Monitor Model"
: : HorizSync 30-70
: : VertRefresh 50-160
: : 
: : # -- 1400x1050 --
: : # 1400x1050 @ 60Hz, 65.8 kHz hsync
: : Modeline "1400x1050" 129 1400 1464 1656 1960
: : 1050 1051 1054 1100 +HSync +VSync
: : 
: : # 1400x1050 @ 70Hz, 76.8 kHz hsync
: : Modeline "1400x1050" 151 1400 1464 1656 1960
: : 1050 1051 1054 1100 +HSync +VSync
: : 
: : # 1400x1050 @ 75Hz, 82.3 kHz hsync
: : Modeline "1400x1050" 162 1400 1464 1656 1960
: : 1050 1051 1054 1100 +HSync +VSync
: : 
: : # 1400x1050 @ 85Hz, 93.2 kHz hsync
: : Modeline "1400x1050" 184 1400 1464 1656 1960
: : 1050 1051 1054 1100 +HSync +VSync
: : 
: : EndSection
: : 
: : Section "Device"
: : # no known options
: : Identifier "NVIDIA GeForce 2 (generic)"
: : Driver "nv"
: : VendorName "NVIDIA GeForce 2 (generic)"
: : BoardName "NVIDIA GeForce 2 (generic)"
: : 
: : #BusID
: : EndSection
: : 
: : Section "Screen"
: : Identifier "Screen0"
: : Device "NVIDIA GeForce 2 (generic)"
: : Monitor "Monitor0"
: : DefaultDepth 24
: : 
: : Subsection "Display"
: : Depth 24
: : Modes "1024x768"
: : EndSubsection
: : 
: : EndSection
: : 
: : Section "DRI"
: : Mode 0666
: : EndSection 
: : 
: : 
: : 
: : 
: : 
: : 
: : : : <시스템 사양> 
: : : : 
: : : : 사용배포본 : 와우리눅스 7.1 파란 (한컴 KDE 2.2.1) 
: : : : VGA        : NVIDIA Quadro2 Pro (NV15GL) 
: : : : M/B        : Abit SA6 (i815EP, ICH2) 
: : : : CPU        : Intel Pentium III 1GHz (FSB133) 
: : : : HDD        : SAMSUNG SV2042, SV3063 (ATA100) 
: : : : Sound Card : SoundBlaster Live! DE (CT4670) 
: : : : LAN Card  : 3Com Etherlink 10/100 905B 
: : : : 
: : : : 안녕하세요. 
: : : : 궁금해서 질문드립니다 
: : : : 리눅스에서 화면이 한쪽으로 쏠려 모니터로 재대로 마추니 윈도우즈에
: 서 쏠리고 그래서 리눅스에서 /usr/x11R6/xvidtdune를 실행하여 모니터를 재
: 대로 마추고 /etc/x11/xf86config 의 1024X768 (제가 사용하는 해상도)의 
: modeline의 값을 수정하였거든요? 근데 xwindow를 재시작하거나 재부팅 하
: 면 다시 한쪽으로 쏠리는 화면으로 돌아와 버립니다. 
: : : : 이거 xwindow를 재시작하거나 재부팅 하더라도 설정값 그대로 나오게 
: 할려면 어떻게 해야 하나요? 
: : : : 답변 주시면 감사하겠습니다. 그럼 좋은 하루 되세요...
: : : : 
: : : : --
: : : : BONOBONO.COM
: : : 
: : : 저두 그것 때문에 고생한적이...
: : : 결론은 /etc/x11/xf86config-4 파일을 고치시면 됩니다..  
: : : 
: : : 그럼 초보에 허접한 답변 ^^
: : 
: : --
: : BONOBONO.COM
 --
BONOBONO.COM