>> Edit article

			이름
			제목
			패스워드

안녕하세요                 밑에는 저의 wine.conf설정파일입니다.                 실행하면 이런 애러가 나는데 설정부분을 바로 잡아주시면 감사하겠습니다.                 [ root@cry windows]# wine notepad.exe                 Warning: could not find wine config [Drive x] entry for current working directory /mnt/win98/windows; starting in windows                 directory.                 wine: cannot find 'notepad.exe'                 윈98은 /mnt/win98입니다.                 아시는분은 꼭 좀 도와주세요                 [/usr/local/etc/wine.conf]                 ." -*- nroff -*-                 .TH WINE.CONF 5 "December 5, 2000" "Version 20001202" "Wine Configuration File"                 .SH NAME                 wine.conf - Wine configuration file                 .SH DESCRIPTION                 .B wine                 expects a configuration file (                 .I /etc/wine.conf                 ), which should conform to the following rules. Common locations are                 /usr/local/etc/wine.conf or (in some distributions)                 /etc/wine.conf. The actual directory where that file resides may be                 specified during the execution of the                 .B configure                 script with the --sysconfdir option. Alternatively, you may have a                 file named                 .I config                 in this format in your ~/.wine directory or in the directory named in                 the                 .B WINEPREFIX                 environment variable. A sample configuration file is available as                 .I documentation/samples/config                 in the Wine source distribution.                 .SH CONFIGURATION FILE FORMAT                 All entries are grouped in sections; a section begins with the line                 .br                 .I [section name]                 .br                 and continues until the next section starts. Individual entries                 consist of lines of the form                 .br                 .I """entry""=""value"""                 .br                 The entry and value can be any text strings, included in double                 quotes; it can also contain references to environment variables                 surrounded by                 .I ${}.                 Inside the double quotes, special characters, backslashes and quotes                 must be escaped with backslashes. Supported section names and entries                 are listed below.                 .PP                 .B [Drive X]                 .br                 This section is used to specify the root directory and type of each                 .B DOS                 drive, since most Windows applications require a DOS/MS-Windows based                 disk drive & directory scheme. There is one such section for every                 drive you want to configure.                 .PP                 .I format: """Path""="""""                 .br                 default: none                 .br                 If you mounted your dos partition as                 .I /dos                 and installed Microsoft Windows in                 C:WINDOWS then you should specify                 .I """Path""=""/mnt/win98/windows/"""                 in the                 .I [Drive C]                 section.                 .PP                 .I format: """Type""="""""                 .br                 default: "hd"                 .br                 Used to specify the drive type this drive appears as in Windows                 or DOS programs; supported types are "floppy", "hd", "cdrom"                 and "network".                 .PP                 .I format: """Label""="""""                 .br                 default: "Drive C"                 .br                 Used to specify the drive label; limited to 11 characters.                 .PP                 .I format: """Serial""="""""                 .br                 default: "12345678"                 .br                 Used to specify the drive serial number, as an 8-character hexadecimal                 number.                 .PP                 .I format: """Filesystem""="""""                 .br                 default: "win98"                 .br                 Used to specify the type of the file system Wine should emulate on a given                 directory structure/underlying file system.                 .br                 Supported types are "msdos" (or "fat"), "win95" (or "vfat"), "unix".                 .br                 Recommended:                 .br                 "win95" for ext2fs, VFAT and FAT32                 .br                 "msdos" for FAT16 (ugly)                 .br                 You definitely do not want to use "unix" unless you intend to port                 programs using Winelib. Always try to avoid using FAT16. Use the                 VFAT/FAT32 OS file system driver instead.                 .PP                 .I format: """FailReadOnly""="""""                 .br                 Read-only files may not be opened in write mode (the default is to                 allow opening read-only files for writing, because most Windows                 programs always request read-write access, even on CD-ROM drives...).                 .PP                 .B [wine]                 .br                 .I format: """windows""=""c:windows"""                 .br                 default: "C:\WINDOWS"                 .br                 Used to specify a different Windows directory; make sure to double the                 backslashes.                 .PP                 .I format: """system""=""c:windows/system"""                 .br                 default: "C:\WINDOWS\SYSTEM"                 .br                 Used to specify a different system directory; make sure to double the                 backslashes.                 .PP                 .I format: """temp""=""c: mp"""                 .br                 default: "C:\TEMP"                 .br                 Used to specify a directory where Windows applications can store                 temporary files.                 .PP                 .I format: """profile""="""""                 .br                 default: nothing                 .br                 sth=c:windows;c:windowssystem                 SymbolTableFile=/usr/X11R6/lib/wine.sym                 Used to specify a directory where Windows stores special folders and                 the user-registry files (user.dat or ntuser.dat). Mapped to                 environment variable %USERPROFILE%. Set this value when running with                 a native NT or a native win95 directory with per-user settings.                 .PP                 .I format: """path""="""""                 .br                 default: "C:\WINDOWS;C:\WINDOWS\SYSTEM"                 .br                 Used to specify the path which will be used to find executables and                 dlls. Make sure to double all the backslashes.                 .PP                 .B [DllDefaults]                 .br                 .I format: """EXTRA_LD_LIBRARY_PATH""=""/usr/lib/wine[:/more/path/to/search[:...]]"""                 .br                 The path will be appended to any existing LD_LIBRARY_PATH from the                 environment for the search of .so libraries.                 .PP                 .I format: """DefaultLoadOrder""=""native,so,builtin"""                 .br                 A comma separated list of module-types to try to load in that specific                 order. The DefaultLoadOrder key is used as a fallback when a module is                 not specified explicitely. If the DefaultLoadOrder key is not found,                 then the order "native,builtin,so" is used.                 .br                 Case is not important and only the first letter of each type is enough                 to identify the type n[ative], s[o], b[uiltin]. Also whitespace is                 ignored. See also commandline option                 .I --dll                 for details about the allowable types.                 .PP                 .B [DllOverrides]                 .br                 There are no explicit keys defined other than module/library names. A                 module namd is followed by an assignment of the load order for this                 specific module. See above for possible types. You should not specify                 an extension.                 .br                 Examples:                 .br                 .I """kernel32""=""builtin"""                 .br                 .I """kernel""=""builtin"""                 .br                 .I """comdlg32""=""native, builtin"""                 .br                 .I """commdlg""=""native, builtin"""                 .br                 Changing the load order of kernel/kernel32 and gdi/gdi32 to                 anything other than builtin will cause wine to fail because wine cannot                 use native versions for these libraries (gdi[32] might work native someday,                 but kernel[32] will never work native).                 Note that using the native versions of user[32] isn't recommended right now,                 as these modules face nearly the same problems as kernel/gdi and we only                 just managed to make them work partially. But trying to use it might get                 your program running.                 .br                 Always make sure that you have some kind of strategy in mind when you start                 fiddling with the current defaults and needless to say that you must know                 what you are doing.                 .PP                 .B [serialports]                 .br                 .I format: """com[12345678]""="""""                 .br                 default: none                 .br                 Used to specify the devices which are used as COM1 - COM8.                 .PP                 .B [parallelports]                 .br                 .I format: """lpt[12345678]""="""""                 .br                 default: none                 .br                 Used to specify the devices which are used as LPT1 - LPT8.                 .PP                 .B [spy]                 .br                 .I format: """exclude""="""""                 .br                 default: none                 .br                 Used to specify which messages will be excluded from the logfile.                 .PP                 .I format: """include""="""""                 .br                 default: none                 .br Used to specify which messages will be included in the logfile.                 .PP                 .B [Tweak.Layout]                 .br                 .I format: """WineLook""="""""                 .br                 default: "Win31"                 .br                 Use Win95-like window displays or Win3.1-like window displays.                 .PP                 .B [Registry]                 .br                 .I format: """LoadGlobalRegistryFiles""="""""                 .br                 Global registries (stored in /etc)                 .PP                 .I format: """LoadHomeRegistryFiles""="""""                 .br                 Home registries (stored in ~user/.wine/)                 .PP                 .I format: """WritetoHomeRegistryFiles""="""""                 .br                 TRY to write all changes to the home registry files                 .PP                 .I format: """LoadWindowsRegistryFiles""="""""                 .br                 Load Windows registry from the current Windows directory.                 .PP                 booleans: Y/y/T/t/1 are true, N/n/F/f/0 are false.                 .br                 Defaults are read all, write to home files.                 .PP                 .SH SAMPLE CONFIGURATION FILE                 A sample configuration file is distributed as                 .B documentation/samples/config                 in the Wine source distribution.                 .SH FILES                 .TP                 .I /etc/wine.conf                 Global configuration file for wine.                 .TP                 .I ~/.wine/config                 User-specific configuration file                 .SH ENVIRONMENT VARIABLES                 .TP                 .I WINEPREFIX                 Specifies the directory that contains the per-user                 .I config                 file, the registry files, and the wineserver socket. The default is                 .I $HOME/.wine.                 .SH "SEE ALSO"                 .BR wine (1)

Copyleft 1999-2026 by JSBoard Open Project Theme Designed by IDOO All right reserved