잰투 리눅스에서의 문제인데......고수님들의 도움이 필요합니다.
 여타 OS , 그러니까...redhat계열,solaris(ia),windog등에서는
잘읽어 들이는 하드를 잰투에서만 못읽어 들이네요.
 dmesg했을때, 나오는 에러 부분입니다.
 hdc: SAMSUNG SV1022D, ATA DISK drive
hdd: CRD-8480M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete
Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
hdc: 1 sectors (0 MB) w/480KiB Cache, CHS=16383/16/63, (U)DMA
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus1/target0/lun0:hdc : bad access: block=0, count=2
end_request: I/O error, dev 16:00 (hdc), sector 0
hdc : bad access: block=0, count=2
end_request: I/O error, dev 16:00 (hdc), sector 0
 unable to read partition table
 편의상 hdc,hdd에 하드와 cdrom을 사용하구요.
 물리적인 하드디스크 변경은 다 해봤습니다.
 잰투 1.1/1.2/1.4 다 해봐도 마찬가지구요.
 잰투에서만 못읽어 들이니 좀 깜깜하네요.
 도움 부탁 드림니다.
   ps : 참고로 dmesg의 전체 내용입니다.
  Linux version 2.4.19-gentoo-r7 (root at inventor.gentoo.org) (gcc
version 2.95.3 20010315 (release)) #4 Wed Jun 5 07:09:05 Local time
zone must be set--see zic manual page 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
 BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
 BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: devfs=nomount vga=normal load_ramdisk=1
prompt_ramdisk=0 ramdisk_size=22000 initrd=rescue.gz
root=/dev/ram0 rw BOOT_IMAGE=kernel
Initializing CPU#0
Detected 802.040 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1576.96 BogoMIPS
Memory: 377992k/393152k available (1759k kernel code, 14772k
reserved, 327k data, 212k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor =
0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU:    After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:            Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb060, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12 (20020219) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
JFS development version: $Name: $
SGI XFS with ACLs, DMAPI, realtime, quota, no debug enabled
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
block: 720 slots per queue, batch=180
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hdc: SAMSUNG SV1022D, ATA DISK drive
hdd: CRD-8480M, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete
Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
hdc: 1 sectors (0 MB) w/480KiB Cache, CHS=16383/16/63, (U)DMA
hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus1/target0/lun0:hdc : bad access: block=0, count=2
end_request: I/O error, dev 16:00 (hdc), sector 0
hdc : bad access: block=0, count=2
end_request: I/O error, dev 16:00 (hdc), sector 0
 unable to read partition table
RAMDISK driver initialized: 16 RAM disks of 22000K size 1024 blocksize
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision:1.275 $ time 07:00:47 Jun  5 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:07.2
PCI: Sharing IRQ 3 with 00:07.3
PCI: Sharing IRQ 3 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:07.3
PCI: Sharing IRQ 3 with 00:07.2
PCI: Sharing IRQ 3 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 7250k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 212k freed
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:0e.0
eth0: RealTek RTL8139 Fast Ethernet at 0x9883a000,
00:c0:26:59:75:6f, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
VFS: Disk change detected on device ide1(22,64)
inserting floppy driver for 2.4.19-gentoo-r7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
VFS: Disk change detected on device fd(2,0)