아래는 부팅시 나오는 내용이구여....
Board Name:<K7V>.
Board Version: REV 1.xx.
Asset Tag: Asset-1234567890.
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169704kB/56568kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:4.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MPE3084AE, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CRD-8402B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(66)
 위에서
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
부분에 대한 설명과
VP_IDE: not 100% native mode: will probe irqs later
에 대해 수정(?)하는 방법좀 알려주세요...
 하드는 udma66으로 나오는데 실제는 33으로 되는것 같거든요.
참고로 현재 시스템에서 나오는 속도는 다음과 같습니다.
 /dev/hda:
 Timing buffered disk reads:  64 MB in  2.96 seconds = 21.62 MB/sec