2.2.12 커널에서 2.2.18 로 컴파일 하고
 부팅하니까 아래와 같은 부팅화면이 나옵니다..
  Linux version 2.2.12-20kr (root at linuxone.alzzalinux.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)
) #1 Tue Oct 12 16:46:36 KST 1999 Detected 651490779 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 650.44 BogoMIPS
Memory:122560k/125952k available (1048k kernel code, 412k reserved, 1588k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
Pentium-III serial number disabled.
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch at atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfd9b0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 01:50
PCI: Enabling I/O for device 01:70
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdc: SAMSUNG SC-148P, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALLlct15 20, 19470MB w/418kB Cache, CHS=2482/255/63
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision:2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1449.324 MB/sec
   p5_mmx    :  1522.095 MB/sec
   8regs     :  1118.997 MB/sec
   32regs    :   627.126 MB/sec
using fastest function: p5_mmx (1522.095 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 > hda3
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 385520k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: dsp reset failed.
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html   WARNING:
 The PCI BIOS assigned this PCI NE2k card to IRQ 0, which is unlikely to work!.  You should use the PCI BIOS setup to a
ssign a valid IRQ line. ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x3000, IRQ 0.
eth0: RealTek RTL-8029 found at 0x3000, IRQ 0, 00:E0:29:4E:A8:6B.
   컴파일이 정상적으로 이루어진건지 알고 싶구요..
 네트워크(이더넷)이 잘 설치됐는지 알고 싶습니다..
 ping 명령어로 (ping test)를 해봤는데.
 네트워크를 이용할수없다고 나오네여..
 전 유동 ip를 쓰는데..
 어케하면 네트워크 사용가능한지 확인할수 있을까여?--찬성합니다..