re-pppoe를 설치했고..전 와우리눅스6.2UP을 쓰고 있습니다.
인터넷이 안돼네요..쩝..이 인터넷 하고파랑
지금 3일째 이것땜시 밤에 잠을 못자고 있습니다.
 하나로 홈랜ADSL사용하고 계신 다른 성공하신님들의 pppoe.conf파일 좀 보여주세요.
물런 아뒤랑 비번은 숨기고^^;
 백문이 불여일견이라고..한번 봤으면 하네요.
제발부탁합니다...
 그리고 랜카드를 리눅스에서 잡았나 확인할 방법은요?
전 그냥 문서에서 본데로 "modprobe rt18139" 했거든요..
제대로 잡혔나 모르겠네요..(랜카드는리얼텍8139a 고요)
 참 저의 pppoe.conf파일을 보여드릴께요
잘못된거 있으면 지적해주세요..부탁드릴께요
 --------------pppoe.conf 전문(all document)------------------
pppoe.conf
#
# Configuration file for rp-pppoe. Edit as appropriateand install in
# /etc/ppp/pppoe.conf
#
# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and
# adsl-status shell scripts. It is *not* used in any way by the
# "pppoe" executable.
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# This file may be distributed under the terms of the GNU General
# Public License.
#
# $Id: pppoe.conf,v 1.10 2000/09/1619:56:12 dfs Exp $
#***********************************************************************
 # When you configure a variable, DO NOT leave spaces around the"=" sign.
 # Ethernet card connected to ADSL modem
ETH='eth0'
 # ADSL username. You may have to supply "@provider.com" Sympatico
# users in Canada do need to include "@sympatico.ca"
# Sympatico uses PAP authentication. Make sure/etc/ppp/pap-secrets
# contains the right username/password combination.
# For Magma, use xxyyzz at magma.ca USER='fate9339'
 # Bring link up on demand? Default is to leave link up all the time.
# If you want the link to come up on demand, set DEMAND to a number indicating
# the idle time after which the link is brought down.
DEMAND=no
#DEMAND=300
 # Obtain DNS server addresses from the peer (recent versions of pppd only)
USEPEERDNS=no
 ### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT
 # How long adsl-start waits for a new PPP interface to appear before
# concluding something went wrong. If you use 0, then adsl-start
# exits immediately with a successful status and does not wait for the
# link to come up. Time is in seconds.
#
# WARNING WARNING WARNING:
#
#If you are using rp-pppoe on a physically-inaccessible host, set
# CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying
# to connect forever after adsl-start is called. Otherwise, it will
# give out after CONNECT_TIMEOUT seconds and will not attempt to
# connect again, making it impossible to reach.
CONNECT_TIMEOUT=60
 # How often in seconds adsl-start polls to check if link is up
CONNECT_POLL=6
 # Character to echo at each poll. Use PING="" if you don't want
# anything echoed
PING="."
 # File where the adsl-connect script writes its process-ID.
# Three files are actually used:
# $PIDFILE contains PID of adsl-connect script
# $PIDFILE.pppoe contains PID of pppoe process
# $PIDFILE.pppd contains PID of pppd process
PIDFILE=/var/run/adsl.pid
 # Do you want to use synchronous PPP? "yes" or "no". "yes" is much
# easier on CPU usage, but may not work for you. It is safer to use
# "no", but you may want to experiment with "yes". "yes" is generally
# safe on Linux machineswith the n_hdlc line discipline; unsafe on others.
SYNCHRONOUS=no
 # Do you want to clamp the MSS? Here's how to decide:
# - If you have only a SINGLE computer connected to the ADSL modem, choose
# "no".
# - If you have a computeracting as a gateway for a LAN, choose "1412".
# The setting of 1412 is safe for either setup, but uses slightly more
# CPU power.
CLAMPMSS=1412
#CLAMPMSS=no
 # LCP echo interval and failure count.
LCP_INTERVAL=20
LCP_FAILURE=3
 # PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
PPPOE_TIMEOUT=80
 # Firewalling: One of NONE, STANDALONE or MASQUERADE
FIREWALL=NONE
 # Any extra arguments to pass to pppoe. Normally, use a blank string
# like this:
PPPOE_EXTRA="-S pppoe"
 # Rumour has it that "Citizen's Communications" with a 3Com
# HomeConnect ADSL Modem DualLink requires these extra options:
# PPPOE_EXTRA="-S pppoe"