안녕하세요?
 음.. 글쌔요.. 저는 각각의 계정 이용자에게 홈페이지를 할당해 주려고
할때 문제가 되었던 부분이었었습니다만...
아마도 비슷한 경우가 아닐까 합니다.
 정확히 httpd 에서 ls -l 을 하셨을 경우에 html 디렉토리의 펴미션을
확인해 보세요..
html 디렉토리가 755의 퍼미션을 가지고 있어야 nobody 접속이 이루어
집니다..
 또한 각 계정에 주실 때도 각 계정의 홈 디렉토리 역시 마찬가지로 수정
되어야만 엑세스가 가능합니다.
한번 확인해 보실길....
  : 리눅서님들 안녕하시져..
: allix linux 6.2를 설치하고
: 아파치 데몬은 그냥 깔리는데로
: 살펴보니까 1.3.11이던데여
: httpd.conf에서
:
: doccumentroot "/hoem/httpd/html"
:
: 이라구 셋팅!!!
:
: 퍼미션두 다 살펴 보았지만 이상 없는데
: 브라우져로 접속하면
:
: Forbidden
: You don't have permission to access / on this server.
: -----------------------------------------
: Apache/1.3.11 Server at taxnews Port 80
:
: 음음 게시판엔 퍼미션예기들만 하는데.. 그거 이상은 없거든요
: 하두 답답해서 home전체를 777로 걸어보기두 하구
: 이젠 거의 포기상태 입니다.
:
: 지금은 1.3.14버전을 다운 받고 새로 설치하려 생각 중입니다.
: 문제가 있다면 httpd.conf화일 일꺼 같은데..
: httpd -t로 체크해도 이상은 없고.
:
: 다른 (잘돌아가고 있는)서버의 httpd.conf과도 비교 해 봤지만
: 어디가문제인지 모르겠네여...
:
: 아시는 분들... 누군가에게 도움이 될수 있도로 ....
:
: ===================================================================
:
: # #
: # # httpd.conf -- Apache HTTP server configuration file
: # #
:
:
: # Based upon the NCSA server configuration files originally by Rob
: McCool.
:
: # This is the main Apache server configuration file.  It contains the
: # configuration directives that give the server its instructions.
: # See <URL:http://www.apache.org/docs/> for detailed information
about
: # the directives.
:
: # Do NOT simply read the instructions in here without understanding
: # what they do.  They're here only as hints or reminders.  If you
are
: unsure
: # consult the online docs. You have been warned.
:
: # After this file is processed, the server will look for and process
: # /usr/conf/srm.conf and then /usr/conf/access.conf
: # unless you have overridden these with ResourceConfig and/or
: # AccessConfig directives here.
:
: # The configuration directives are grouped into three basic sections:
: # 1. Directives that control the operation of the Apache server
: process as a
: # whole (the 'global environment').
: # 2. Directives that define the parameters of the 'main'
or 'default'
: server,
: # which responds to requests that aren't handled by a virtual host.
: # These directives also provide default values for the settings
: # of all virtual hosts.
: # 3. Settings for virtual hosts, which allow Web requests to be sent
to
: # different IP addresses or hostnames and have them handled by the
: # same Apache server process.
:
: # Configuration and logfile names: If the filenames you specify for
: many
: # of the server's control files begin with "/" (or "drive:/" for
: Win32), the
: # server will use that explicit path.  If the filenames do *not*
begin
: # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
: # with ServerRoot set to "/usr/local/apache" will be interpreted by
the
: # server as "/usr/local/apache/logs/foo.log".
:
:
: # ## Section 1: Global Environment
:
: # The directives in this section affect the overall operation of
: Apache,
: # such as the number of concurrent requests it can handle or where it
: # can find its configuration files.
:
:
:
: # ServerType is either inetd, or standalone.  Inetd mode is only
: supported on
: # Unix platforms.
:
: ServerType standalone
: # AddModule mod_perl.c
:
:
: # ExtendedStatus: controls whether Apache will generate "full" status
: # information (ExtendedStatus On) or just basic information
: (ExtendedStatus
: # Off) when the "server-status" handler is called. The default is
Off.
:
: # ExtendedStatus On
:
: # ## Section 2: 'Main' server configuration
:
: # The directives in this section set up the values used by the 'main'
: # server, which responds to any requests that aren't handled by a
: # <VirtualHost> definition.  These values also provide defaults for
: # any <VirtualHost> containers you may define later in the file.
:
: # All of these directives may appear inside <VirtualHost> containers,
: # in which case these default settings will be overridden for the
: # virtual host being defined.
:
:
:
: # If your ServerType directive (set earlier in the 'Global
Environment'
: # section) is set to "inetd", the next few directives don't have any
: # effect since their settings are defined by the inetd configuration.
: # Skip ahead to the ServerAdmin directive.
:
:
:
: # Port: The port to which the standalone server listens. For
: # ports < 1023, you will need httpd to be run as root initially.
:
: Port 80
:
:
: # Number of servers to start initially --- should be a reasonable
: ballpark
: # figure.
:
: StartServers 8
:
:
: # Server-pool size regulation.  Rather than making you guess how many
: # server processes you need, Apache dynamically adapts to the load it
: # sees --- that is, it tries to maintain enough server processes to
: # handle the current load, plus a few spare servers to handle
transient
: # load spikes (e.g., multiple simultaneous requests from a single
: # Netscape browser).
:
: # It does this by periodically checking how many servers are waiting
: # for a request.  If there are fewer than MinSpareServers, it creates
: # a new spare.  If there are more than MaxSpareServers, some of the
: # spares die off.  The default values are probably OK for most sites.
:
: MinSpareServers 5
: MaxSpareServers 20
:
:
: # KeepAliveTimeout: Number of seconds to wait for the next request
: from the
: # same client on the same connection.
:
: MaxKeepAliveRequests 100
:
:
: # MaxKeepAliveRequests: The maximum number of requests to allow
: # during a persistent connection. Set to 0 to allow an unlimited
: amount.
: # We recommend you leave this number high, for maximum performance.
:
: KeepAliveTimeout 15
:
:
: # Limit on total number of servers running, i.e., limit on the number
: # of clients who can simultaneously connect --- if this limit is ever
: # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO
LOW.
: # It is intended mainly as a brake to keep a runaway server from
taking
: # the system with it as it spirals down...
:
: MaxClients 150
:
:
: # MaxRequestsPerChild: the number of requests each child process is
: # allowed to process before the child dies.  The child will exit so
: # as to avoid problems after prolonged use when Apache (and maybe the
: # libraries it uses) leak memory or other resources.  On most
systems,
: this
: # isn't really needed, but a few (such as Solaris) do have notable
: leaks
: # in the libraries. For these platforms, set to something like 10000
: # or so; a setting of 0 means unlimited.
:
: # NOTE: This value does not include keepalive requests after the
: initial
: # request per connection. For example, if a child process handles
: # an initial request and 10 subsequent "keptalive" requests, it
: # would only count as 1 request towards this limit.
:
: MaxRequestsPerChild 100
:
:
: # PidFile: The file in which the server should record its process
: # identification number when it starts.
:
: PidFile /var/run/httpd.pid
:
:
: # In the standard configuration, the server will process this file,
: # srm.conf, and access.conf in that order.  The latter two files are
: # now distributed empty, as it is recommended that all directives
: # be kept in a single file for simplicity.  The commented-out values
: # below are the built-in defaults.  You can have the server ignore
: # these files altogether by using "/dev/null" (for Unix) or
: # "nul" (for Win32) for the arguments to the directives.
:
: # ResourceConfig conf/srm.conf
: # AccessConfig conf/access.conf
:
:
: # Timeout: The number of seconds before receives and sends time out.
:
: Timeout 300
:
:
: # ScoreBoardFile: File used to store internal server process
: information.
: # Not all architectures require this.  But if yours does (you'll
know
: because
: # this file will be  created when you run Apache) then you *must*
: ensure that
: # no two invocations of Apache share the same scoreboard file.
:
: ScoreBoardFile /var/run/httpd.scoreboard
:
:
: # ServerRoot: The top of the directory tree under which the server's
: # configuration, error, and log files are kept.
:
: # NOTE!  If you intend to place this on an NFS (or otherwise network)
: # mounted filesystem then please read the LockFile documentation
: # (available at
: <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
: # you will save yourself a lot of trouble.
:
: # Do NOT add a slash at the end of the directory path.
:
: ServerRoot "/etc/httpd"
:
:
: # HostnameLookups: Log the names of clients or just their IP
addresses
: # e.g., www.apache.org (on) or 204.62.129.132 (off).
: # The default is off because it'd be overall better for the net if
: people
: # had to knowingly turn this feature on, since enabling it means that
: # each client request will result in AT LEAST one lookup request to
the
: # nameserver.
:
: HostnameLookups off
:
:
: # Listen: Allows you to bind Apache to specific IP addresses and/or
: # ports, in addition to the default. See also the <VirtualHost>
: # directive.
:
: # Listen 3000
: # Listen 12.34.56.78:80
:
:
: # BindAddress: You can support virtual hosts with this option. This
: directive
: # is used to tell the server which IP address to listen to. It can
: either
: # contain "*", an IP address, or a fully qualified Internet domain
: name.
: # See also the <VirtualHost> and Listen directives.
:
: # BindAddress *
:
:
: # Dynamic Shared Object (DSO) Support
:
: # To be able to use the functionality of a module which was built as
a
: DSO you
: # have to place corresponding `LoadModule' lines at this location so
: the
: # directives contained in it are actually available _before_ they
are
: used.
: # Please read the file README.DSO in the Apache 1.3 distribution for
: more
: # details about the DSO mechanism and run `httpd -l' for the list of
: already
: # built-in (statically linked and thus always available) modules in
: your httpd
: # binary.
:
: # Note: The order is which modules are loaded is important.  Don't
: change
: # the order below without expert advice.
:
: # Example:
: # LoadModule foo_module modules/mod_foo.so
: # LoadModule mmap_static_module modules/mod_mmap_static.so
: LoadModule vhost_alias_module modules/mod_vhost_alias.so
: LoadModule env_module         modules/mod_env.so
: LoadModule config_log_module  modules/mod_log_config.so
: LoadModule agent_log_module   modules/mod_log_agent.so
: LoadModule referer_log_module modules/mod_log_referer.so
: # LoadModule mime_magic_module  modules/mod_mime_magic.so
: LoadModule mime_module        modules/mod_mime.so
: LoadModule negotiation_module modules/mod_negotiation.so
: LoadModule status_module      modules/mod_status.so
: LoadModule info_module        modules/mod_info.so
: LoadModule includes_module    modules/mod_include.so
: LoadModule autoindex_module   modules/mod_autoindex.so
: LoadModule dir_module         modules/mod_dir.so
: LoadModule cgi_module         modules/mod_cgi.so
: LoadModule asis_module        modules/mod_asis.so
: LoadModule imap_module        modules/mod_imap.so
: LoadModule action_module      modules/mod_actions.so
: # LoadModule speling_module     modules/mod_speling.so
: LoadModule userdir_module     modules/mod_userdir.so
: LoadModule alias_module       modules/mod_alias.so
: LoadModule rewrite_module     modules/mod_rewrite.so
: LoadModule access_module      modules/mod_access.so
: LoadModule auth_module        modules/mod_auth.so
: LoadModule anon_auth_module   modules/mod_auth_anon.so
: LoadModule db_auth_module     modules/mod_auth_db.so
: LoadModule digest_module      modules/mod_digest.so
: LoadModule proxy_module       modules/libproxy.so
: # LoadModule cern_meta_module   modules/mod_cern_meta.so
: LoadModule expires_module     modules/mod_expires.so
: LoadModule headers_module     modules/mod_headers.so
: LoadModule usertrack_module   modules/mod_usertrack.so
: # LoadModule example_module     modules/mod_example.so
: # LoadModule unique_id_module   modules/mod_unique_id.so
: LoadModule setenvif_module    modules/mod_setenvif.so
: # LoadModule bandwidth_module   modules/mod_bandwidth.so
: # LoadModule put_module		modules/mod_put.so
:
: # Extra Modules
: # LoadModule php_module         modules/mod_php.so
: LoadModule php3_module        modules/libphp3.so
: ClearModuleList
: # LoadModule perl_module        modules/libperl.so
:
: # Reconstruction of the complete module list from all available
modules
: # (static and shared ones) to achieve correct module execution order.
: # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
: # AddModule mod_mmap_static.c
: AddModule mod_vhost_alias.c
: AddModule mod_env.c
: AddModule mod_log_config.c
: AddModule mod_log_agent.c
: AddModule mod_log_referer.c
: # AddModule mod_mime_magic.c
: AddModule mod_mime.c
: AddModule mod_negotiation.c
: AddModule mod_status.c
: AddModule mod_info.c
: AddModule mod_include.c
: AddModule mod_autoindex.c
: AddModule mod_dir.c
: AddModule mod_cgi.c
: AddModule mod_asis.c
: AddModule mod_imap.c
: AddModule mod_actions.c
: # AddModule mod_speling.c
: AddModule mod_userdir.c
: AddModule mod_alias.c
: AddModule mod_rewrite.c
: AddModule mod_access.c
: AddModule mod_auth.c
: AddModule mod_auth_anon.c
: AddModule mod_auth_db.c
: AddModule mod_digest.c
: AddModule mod_proxy.c
: # AddModule mod_cern_meta.c
: AddModule mod_expires.c
: AddModule mod_headers.c
: AddModule mod_usertrack.c
: # AddModule mod_example.c
: # AddModule mod_unique_id.c
: AddModule mod_so.c
: AddModule mod_setenvif.c
: # AddModule mod_bandwidth.c
: # AddModule mod_put.c
:
: # Extra Modules
: # AddModule mod_php.c
: AddModule mod_php3.c
:
:
: # ServerAdmin: Your address, where problems with the server should be
: # e-mailed.  This address appears on some server-generated pages,
such
: # as error documents.
:
: ServerAdmin root@localhost : NameVirtualHost 211.116.237.199
: ServerName taxnews
:
:
: # ServerName: allows you to set a host name which is sent back to
: clients for
: # your server if it's different than the one the program would get
: (i.e., use
: # "www" instead of the host's real name).
:
: # Note: You cannot just invent host names and hope they work. The
name
: you
: # define here must be a valid DNS name for your host. If you don't
: understand
: # this, ask your network administrator.
: # If your host doesn't have a registered DNS name, enter its IP
: address here.
: # You will have to access it by its address (e.g.,
: http://123.45.67.89/) : # anyway, and this will make redirections work in a sensible way.
:
: # ServerName localhost
:
:
: # DocumentRoot: The directory out of which you will serve your
: # documents. By default, all requests are taken from this directory,
: but
: # symbolic links and aliases may be used to point to other locations.
:
: DocumentRoot "/home/httpd/html"
:
:
: # ErrorLog: The location of the error log file.
: # If you do not specify an ErrorLog directive within a <VirtualHost>
: # container, error messages relating to that virtual host will be
: # logged here.  If you *do* define an error logfile for a
<VirtualHost>
: # container, that host's errors will be logged there and not here.
:
: ErrorLog /var/log/httpd/error_log
:
:
: # ScriptAlias: This controls which directories contain server
scripts.
: # ScriptAliases are essentially the same as Aliases, except that
: # documents in the realname directory are treated as applications and
: # run by the server when requested rather than as documents sent to
: the client.
: # The same rules about trailing "/" apply to ScriptAlias directives
as
: to
: # Alias.
:
: ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"
:
:
: # If you wish httpd to run as a different user or group, you must run
: # httpd as root initially and it will switch.
:
: # User/Group: The name (or #number) of the user/group to run httpd
as.
: # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
: # . On HPUX you may not be able to use shared memory as nobody, and
the
: # suggested workaround is to create a user www and use that user.
: # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
: # when the value of (unsigned)Group is above 60000;
: # don't use Group nobody on these systems!
:
: User nobody
: Group nobody
: <IfModule mod_mime_magic.c>
:     MIMEMagicFile share/magic
: </IfModule>
:
: <IfModule mod_perl.c>
:   Alias /perl/ /home/httpd/perl/
:   <Location /perl>
:     SetHandler perl-script
:     PerlHandler Apache::Registry
:     Options +ExecCGI
:   </Location>
: </IfModule>
:
: <Location /doc>
:   order deny,allow
:   deny from all
:   allow from localhost
:   Options Indexes FollowSymLinks
: </Location>
:
:
:
: # The LockFile directive sets the path to the lockfile used when
Apache
: # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
: # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be
left
: at
: # its default value. The main reason for changing it is if the logs
: # directory is NFS mounted, since the lockfile MUST BE STORED ON A
: LOCAL
: # DISK. The PID of the main server process is automatically appended
to
: # the filename.
:
: LockFile /var/lock/httpd.lock
:
:
: # UserDir: The name of the directory which is appended onto a user's
: home
: # directory if a ~user request is received.
:
: UserDir public_html
:
:
: # Control access to UserDir directories.  The following is an example
: # for a site where these directories are restricted to read-only.
:
: # <Directory /home/*/public_html>
: # AllowOverride FileInfo AuthConfig Limit
: # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
: # <Limit GET POST OPTIONS PROPFIND>
: # Order allow,deny
: # Allow from all
: # </Limit>
: # <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
: # Order deny,allow
: # Deny from all
: # </Limit>
: # </Directory>
:
:
: # DirectoryIndex: Name of the file or files to use as a pre-written
: HTML
: # directory index.  Separate multiple entries with spaces.
:
: DirectoryIndex index.html index.htm index.shtml index.cgi
:
:
: # AccessFileName: The name of the file to look for in each directory
: # for access control information.
:
: AccessFileName .htaccess
:
:
: # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
: with each
: # document that was negotiated on the basis of content. This asks
proxy
: # servers not to cache the document. Uncommenting the following line
: disables
: # this behavior, and proxies will be allowed to cache the documents.
:
: # CacheNegotiatedDocs
:
:
: # UseCanonicalName: (new for 1.3)  With this setting turned on,
: whenever
: # Apache needs to construct a self-referencing URL (a URL that
refers
: back
: # to the server the response is coming from) it will use ServerName
and
: # Port to form a "canonical" name.  With this setting off, Apache
will
: # use the hostname:port that the client supplied, when possible. 
This
: # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
:
: UseCanonicalName On
:
:
: # TypesConfig describes where the mime.types file (or equivalent) is
: # to be found.
:
: TypesConfig /etc/mime.types
:
:
: # DefaultType is the default MIME type the server will use for a
: document
: # if it cannot otherwise determine one, such as from filename
: extensions.
: # If your server contains mostly text or HTML
documents, "text/plain"
: is
: # a good value.  If most of your content is binary, such as
: applications
: # or images, you may want to use "application/octet-stream" instead
to
: # keep browsers from trying to display binary files as though they
are
: # text.
:
: DefaultType text/plain
:
:
: # LogLevel: Control the number of messages logged to the error_log.
: # Possible values include: debug, info, notice, warn, error, crit,
: # alert, emerg.
:
: LogLevel warn
:
:
: # The following directives define some format nicknames for use with
: # a CustomLog directive (see below).
:
: LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}
: i"" combined
: LogFormat "%h %l %u %t "%r" %>s %b" common
: LogFormat "%{Referer}i -> %U" referer
: LogFormat "%{User-agent}i" agent
:
:
: # The location and format of the access logfile (Common Logfile
: Format).
: # If you do not define any access logfiles within a <VirtualHost>
: # container, they will be logged here.  Contrariwise, if you *do*
: # define per-<VirtualHost> access logfiles, transactions will be
: # logged therein and *not* in this file.
:
: CustomLog /var/log/httpd/access_log common
:
:
: # If you would like to have agent and referer logfiles, uncomment the
: # following directives.
:
: # CustomLog /var/log/httpd/referer_log referer
: # CustomLog /var/log/httpd/agent_log agent
:
:
: # If you prefer a single logfile with access, agent, and referer
: information
: # (Combined Logfile Format) you can use the following directive.
:
: # CustomLog /var/log/httpd/access_log combined
:
:
: # Optionally add a line containing the server version and virtual
host
: # name to server-generated pages (error documents, FTP directory
: listings,
: # mod_status and mod_info output etc., but not CGI generated
: documents).
: # Set to "EMail" to also include a mailto: link to the ServerAdmin.
: # Set to one of:  On | Off | EMail
:
: ServerSignature On
:
:
: # Aliases: Add here as many aliases as you need (with no limit). The
: format is
: # Alias fakename realname
:
: # Note that if you include a trailing / on fakename then the server
: will
: # require it to be present in the URL.  So "/icons" isn't aliased in
: this
: # example, only "/icons/"..
:
: Alias /icons/ "/home/httpd/icons/"
:
:
: # Redirect allows you to tell clients about documents which used to
: exist in
: # your server's namespace, but do not anymore. This allows you to
tell
: the
: # clients where to look for the relocated document.
: # Format: Redirect old-URI new-URL
:
:
:
: # Directives controlling the display of server-generated directory
: listings.
:
:
:
: # FancyIndexing: whether you want fancy directory indexing or
standard
:
: IndexOptions FancyIndexing
:
:
: # AddIcon* directives tell the server which icon to show for
different
: # files or filename extensions.  These are only displayed for
: # FancyIndexed directories.
:
: AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
:
: AddIconByType (TXT,/icons/text.gif) text/*
: AddIconByType (IMG,/icons/image2.gif) image/*
: AddIconByType (SND,/icons/sound2.gif) audio/*
: AddIconByType (VID,/icons/movie.gif) video/*
:
: AddIcon /icons/binary.gif .bin .exe
: AddIcon /icons/binhex.gif .hqx
: AddIcon /icons/tar.gif .tar
: AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
: AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
: AddIcon /icons/a.gif .ps .ai .eps
: AddIcon /icons/layout.gif .html .shtml .htm .pdf
: AddIcon /icons/text.gif .txt
: AddIcon /icons/c.gif .c
: AddIcon /icons/p.gif .pl .py
: AddIcon /icons/f.gif .for
: AddIcon /icons/dvi.gif .dvi
: AddIcon /icons/uuencoded.gif .uu
: AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
: AddIcon /icons/tex.gif .tex
: AddIcon /icons/bomb.gif core
:
: AddIcon /icons/back.gif ..
: AddIcon /icons/hand.right.gif README
: AddIcon /icons/folder.gif ^^DIRECTORY^^
: AddIcon /icons/blank.gif ^^BLANKICON^^
:
:
: # DefaultIcon: which icon to show for files which do not have an icon
: # explicitly set.
:
: DefaultIcon /icons/unknown.gif
:
:
: # AddDescription: allows you to place a short description after a
file
: in
: # server-generated indexes.  These are only displayed for
FancyIndexed
: # directories.
: # Format: AddDescription "description" filename
:
: # AddDescription "GZIP compressed document" .gz
: # AddDescription "tar archive" .tar
: # AddDescription "GZIP compressed tar archive" .tgz
:
:
: # ReadmeName: the name of the README file the server will look for by
: # default, and append to directory listings.
:
: # HeaderName: the name of a file which should be prepended to
: # directory indexes.
:
: # The server will first look for name.html and include it if found.
: # If name.html doesn't exist, the server will then look for name.txt
: # and include it as plaintext if found.
:
: ReadmeName README
: HeaderName HEADER
:
:
: # IndexIgnore: a set of filenames which directory indexing should
: ignore
: # and not include in the listing.  Shell-style wildcarding is
: permitted.
:
: IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
:
:
: # AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+)
: uncompress
: # information on the fly. Note: Not all browsers support this.
: # Despite the name similarity, the following Add* directives have
: nothing
: # to do with the FancyIndexing customization directives above.
:
: AddEncoding x-compress Z
: AddEncoding x-gzip gz tgz
:
:
: # AddLanguage: allows you to specify the language of a document. You
: can
: # then use content negotiation to give a browser a file in a language
: # it can understand.  Note that the suffix does not have to be the
same
: # as the language keyword --- those with documents in Polish (whose
: # net-standard language code is pl) may wish to use "AddLanguage
: pl .po"
: # to avoid the ambiguity with the common suffix for perl scripts.
:
: AddLanguage en .en
: AddLanguage fr .fr
: AddLanguage de .de
: AddLanguage da .da
: AddLanguage el .el
: AddLanguage it .it
:
:
: # LanguagePriority: allows you to give precedence to some languages
: # in case of a tie during content negotiation.
: # Just list the languages in decreasing order of preference.
:
: LanguagePriority en fr de
:
:
: # AddType: allows you to tweak mime.types without actually editing
it,
: or to
: # make certain files to be certain types.
:
: # For example, the PHP3 module (not part of the Apache distribution -
 
: see
: # http://www.php.net) will typically use:
:
: # AddType application/x-httpd-php3 .php3
: # AddType application/x-httpd-php3-source .phps
: # The following is for PHP/FI (PHP2):
: # AddType application/x-httpd-php .phtml
:
: AddType application/x-tar .tgz
:
:
: # AddHandler: allows you to map certain file extensions
to "handlers",
: # actions unrelated to filetype. These can be either built into the
: server
: # or added with the Action command (see below)
:
: # If you want to use server side includes, or CGI outside
: # ScriptAliased directories, uncomment the following lines.
:
: # To use CGI scripts:
:
: # AddHandler cgi-script .cgi
:
:
: # To use server-parsed HTML files
:
: AddType text/html .shtml
: AddHandler server-parsed .shtml
:
:
: # Uncomment the following line to enable Apache's send-asis HTTP file
: # feature
:
: # AddHandler send-as-is asis
:
:
: # If you wish to use server-parsed imagemap files, use
:
: AddHandler imap-file map
:
:
: # To enable type maps, you might want to use
:
: # AddHandler type-map var
:
:
: # Action: lets you define media types that will execute a script
: whenever
: # a matching file is called. This eliminates the need for repeated
URL
: # pathnames for oft-used CGI file processors.
: # Format: Action media/type /cgi-script/location
: # Format: Action handler-name /cgi-script/location
:
:
:
: # MetaDir: specifies the name of the directory in which Apache can
find
: # meta information files. These files contain additional HTTP headers
: # to include when sending the document
:
: # MetaDir .web
:
:
: # MetaSuffix: specifies the file name suffix for the file containing
: the
: # meta information.
:
: # MetaSuffix .meta
:
:
: # Customizable error response (Apache style)
: # these come in three flavors
:
: # 1) plain text
: # ErrorDocument 500 "The server made a boo boo.
: # n.b.  the (") marks it as text, it does not get output
:
: # 2) local redirects
: # ErrorDocument 404 /missing.html
: # to redirect to local URL /missing.html
: # ErrorDocument 404 /cgi-bin/missing_handler.pl
: # N.B.: You can redirect to a script or a document using server-side-
: includes.
:
: # 3) external redirects
: # ErrorDocument 402
http://some.other_server.com/subscription_info.html : # N.B.: Many of the environment variables associated with the
original
: # request will *not* be available to such a script.
:
:
: # The following directives modify normal HTTP response behavior.
: # The first directive disables keepalive for Netscape 2.x and
browsers
: that
: # spoof it. There are known problems with these browser
: implementations.
: # The second directive is for Microsoft Internet Explorer 4.0b2
: # which has a broken HTTP/1.1 implementation and does not properly
: # support keepalive when it is used on 301 or 302 (redirect)
responses.
:
: BrowserMatch "Mozilla/2" nokeepalive
: BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-
: 1.0
:
:
: # The following directive disables HTTP/1.1 responses to browsers
which
: # are in violation of the HTTP/1.0 spec by not being able to grok a
: # basic 1.1 response.
:
: BrowserMatch "RealPlayer 4.0" force-response-1.0
: BrowserMatch "Java/1.0" force-response-1.0
: BrowserMatch "JDK/1.0" force-response-1.0
:
:
: # Allow http put (such as Netscape Gold's publish feature)
: # Use htpasswd to generate /etc/httpd/conf/passwd.
: # You must unremark these two lines at the top of this file as well:
: # LoadModule put_module		modules/mod_put.so
: # AddModule mod_put.c
:
: # Alias /upload /tmp
: # <Location /upload>
: # EnablePut On
: # AuthType Basic
: # AuthName Temporary
: # AuthUserFile /etc/httpd/conf/passwd
: # EnableDelete Off
: # umask 007
: # <Limit PUT>
: # require valid-user
: # </Limit>
: # </Location>
:
:
: # Allow server status reports, with the URL of
: http://servername/server-status
: # Change the ".your_domain.com" to match your domain to enable.
:
: # <Location /server-status>
: # SetHandler server-status
: # Order deny,allow
: # Deny from all
: # Allow from .your_domain.com
: # </Location>
:
:
: # Allow remote server configuration reports, with the URL of
: # http://servername/server-info (requires that mod_info.c be loaded).
: # Change the ".your_domain.com" to match your domain to enable.
:
: # <Location /server-info>
: # SetHandler server-info
: # Order deny,allow
: # Deny from all
: # Allow from .your_domain.com
: # </Location>
:
: # Allow access to local system documentation from localhost
: Alias /doc/ /usr/doc/
:
: <Directory />
: 	Options FollowSymlinks
: </Directory>
:
: <Directory "/home/httpd/html">
:
:
: # This may also be "None", "All", or any combination of "Indexes",
: # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
:
: # Note that "MultiViews" must be named *explicitly* --- "Options All"
: # doesn't give it to you.
:
: 	#Options Includes Indexes FollowSymlinks
: 	Options Indexes Includes FollowSymlinks
:
: # This controls which options the .htaccess files in directories can
: # override. Can also be "All", or any combination
: of "Options", "FileInfo",
: # "AuthConfig", and "Limit"
:
:
: 	AllowOverride None
:
: # Controls who can get stuff from this server.
:
:     Order allow,deny
:     Allow from all
: </Directory>
:
: <Files ~>
: 	AllowOverride AuthConfig FileInfo Indexes Limit Options
:     Order allow,deny
:     Deny from all
: </Files>
:
: <Directory "/home/httpd/icons">
: 	Options MultiViews Indexes
:     Order allow,deny
:     Allow from all
: </Directory>
:
: <Directory "/home/httpd/cgi-bin">
: 	Options ExecCgi
:     Order allow,deny
:     Allow from all
: </Directory>
:
: =================================================================
:
: --
: 소반입니다.