<b> <u>
(문제) eth0와 eth1 두 개로 설정된 랜카드(3com)의 모듈은 정상일까요?
</u> </u>
----------------------------------------------------------------
<b> <u> /sbin/lsmod </u> </b>
Module                  Size  Used by
ide-cd                 23692   0  (autoclean)
ip_masq_vdolive         1400   0  (unused)
ip_masq_cuseeme         1112   0  (unused)
ip_masq_quake           1392   0  (unused)
ip_masq_autofw          2492   0  (unused)
ip_masq_irc             1624   0  (unused)
ip_masq_raudio          2968   0  (unused)
ip_masq_ftp             4184   0  (unused)
<b> <u> 3c59x                  19428   2  (autoclean) </u> </b>
agpgart                18952   0  (unused)
usb-uhci               18768   0  (unused)
usbcore                42312   1  [usb-uhci]
---------------------------------------------------------------
 <b> <u> more /etc/modules.conf </u> </b>
alias parport_lowlevel parport_pc
alias usb-controller usb-uhci
<b> <u> alias eth0 3c59x </u> </b>
----------------------------------------------------------------
 <b> <u> cat /etc/sysconfig/network-scripts/ifcfg-eth0 </u> </b>
DEVICE=eth0
IPADDR=210.126.18.230
NETMASK=255.255.255.0
ONBOOT=yes
BOOTPROTO=none
BROADCAST=210.126.18.255
NETWORK=210.126.18.0
USERCTL=no
IPXNETNUM_802_2=""
IPXPRIMARY_802_2="no"
IPXACTIVE_802_2="no"
IPXNETNUM_802_3=""
IPXPRIMARY_802_3="no"
IPXACTIVE_802_3="no"
IPXNETNUM_ETHERII=""
IPXPRIMARY_ETHERII="no"
IPXACTIVE_ETHERII="no"
IPXNETNUM_SNAP=""
IPXPRIMARY_SNAP="no"
IPXACTIVE_SNAP="no"
-----------------------------------------------------------------
<b> <u> cat /etc/sysconfig/network-scripts/ifcfg-eth1 </u> </b>
DEVICE=eth1
ONBOOT=yes
BOOTPROTO=none
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
NETMASK=255.255.255.0
IPADDR=192.168.0.1
USERCTL=no
IPXNETNUM_802_2=""
IPXPRIMARY_802_2="no"
IPXACTIVE_802_2="no"
IPXNETNUM_802_3=""
IPXPRIMARY_802_3="no"
IPXACTIVE_802_3="no"
IPXNETNUM_ETHERII=""
IPXPRIMARY_ETHERII="no"
IPXACTIVE_ETHERII="no"
IPXNETNUM_SNAP=""
IPXPRIMARY_SNAP="no"
IPXACTIVE_SNAP="no"
-------------------------------------------------------------------
IP masquerade를 하는데 서버-클라이언트간 ping이 안돼서요..
랜카드-특히 eth1이 제대로 구동되는지 확인할 길없어 부탁드립니다.--겨울엔 옹기종기 모
여앉아서..