부팅을 하면
 MBR
 LILO Linux.....................
 하면서 프롬프트가 나오지 않고 그냥 리눅스로 부팅되어버립니다..
 lilo.conf 에 prompt를 썼는데도 안되는군요..
 물론 설정파일 고친 후에 lilo를 다시 실행시켰구요..
 심지어 도스 디스켓으로 부팅해서 fdisk /mbr 을 한 후에도 위에처럼 부팅이 되네요..
 어떻게 해야할까요..
 배포판은 데비안을 씁니다..
 lilo.conf 파일은 다음과 같습니다.
# Generated by liloconfig
 # Specifies the boot device
boot=/dev/hda6
 # Specifies the device that should be mounted as root.
# If the special name CURRENT is used, the root device is set to the
# device on which the root file system is currently mounted. If the root
# has been changed with  -r , the respective device is used. If the
# variable ROOT is omitted, the root device setting contained in the
# kernel image is used. It can be changed with the rdev program.
root=/dev/hda6
 # Enables map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the map
# smaller. Using COMPACT is especially recommended when booting from a
# floppy disk.
compact
prompt
timeout=200
lba32
 # Install the specified file as the new boot sector.
# If INSTALL is omitted, /boot/boot.b is used as the default.
install=/boot/boot.b
 # Specifies the number of _tenths_ of a second LILO should
# wait before booting the first image.  LILO
# doesn't wait if DELAY is omitted or if DELAY is set to zero.
delay=20
 # Specifies the location of the map file. If MAP is
# omitted, a file /boot/map is used.
 map=/boot/map
 # Specifies the VGA text mode that should be selected when
# booting. The following values are recognized (case is ignored):
#   NORMAL  select normal 80x25 text mode.
#   EXTENDED  select 80x50 text mode. The word EXTENDED can be
#     abbreviated to EXT.
#   ASK  stop and ask for user input (at boot time).
#   <number>  use the corresponding text mode. A list of available modes
#     can be obtained by booting with  vga=ask  and pressing [Enter].
vga=normal
 image=/vmlinuz
        label=Linux
        read-only
 # If you have another OS on this machine (say DOS),
# you can boot if by uncommenting the following lines
# (Of course, change /dev/hda2 to wherever your DOS partition is.)
 other=/dev/hda1
   table=/dev/hda
   label=dos--what a beautiful day..