: : /usr/local/apache/bin/httpd -f /usr/local/apache/conf/httpd.conf
: :
: : 라고 하면..
: :
: : 실행이 되야할텐데..안되네요..
: :
: : 아무런 에러도 나오지 않고...
: :
: : 처음 컴파일했을 때 한 번 실행되었지만 httpd.conf 를 고치고나서
: :
: : 다시 실행시키면 안뜨네요..
: :
: : 다시 컴파일해도 마찬가지입니다..
: :
: : /usr/local/apache/bin/httpd -t 라고 해도 정상이라고 나옵니다..
: :
: : 아래 httpd.conf 파일을 올립니다..
: :
: : ##
: : ## httpd.conf -- Apache HTTP server configuration file
: : ##
: :
: : #
: : # Based upon the NCSA server configuration files originally by Rob McCool.
: : #
: : # This is the main Apache server configuration file.  It contains the
: : ##
: : ## httpd.conf -- Apache HTTP server configuration file
: : ##
: :
: : #
: : # Based upon the NCSA server configuration files originally by Rob McCool.
: : #
: : # This is the main Apache server configuration file.  It contains the
: : # configuration directives that give the server its instructions.
: : # See <URL:http://www.apache.org/docs/> for detailed information about
: : # the directives.
: : #
: : # Do NOT simply read the instructions in here without understanding
: : # what they do.  They're here only as hints or reminders.  If you are unsure
: : # consult the online docs. You have been warned. 
: : #
: : # After this file is processed, the server will look for and process
: : # /usr/local/apache/conf/srm.conf and then /usr/local/apache/conf/access.conf
: : # unless you have overridden these with ResourceConfig and/or
: : # AccessConfig directives here.
: : #
: : # The configuration directives are grouped into three basic sections:
: : #  1. Directives that control the operation of the Apache server process as a
: : #     whole (the 'global environment').
: : #  2. Directives that define the parameters of the 'main' or 'default' server,
: : #     which responds to requests that aren't handled by a virtual host.
: : #     These directives also provide default values for the settings
: : #     of all virtual hosts.
: : #  3. Settings for virtual hosts, which allow Web requests to be sent to
: : #     different IP addresses or hostnames and have them handled by the
: : #     same Apache server process.
: : #
: : # Configuration and logfile names: If the filenames you specify for many
: : # of the server's control files begin with "/" (or "drive:/" for Win32), the
: : # server will use that explicit path.  If the filenames do *not* begin
: : # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
: : # with ServerRoot set to "/usr/local/apache" will be interpreted by the
: : # server as "/usr/local/apache/logs/foo.log".
: : #
: :
: : ### Section 1: Global Environment
: : #
: : # The directives in this section affect the overall operation of Apache,
: : # such as the number of concurrent requests it can handle or where it
: : # can find its configuration files.
: : #
: :
: : #
: : # ServerType is either inetd, or standalone.  Inetd mode is only supported on
: : # Unix platforms.
: : #
: : ServerType standalone
: :
: : #
: : # ServerRoot: The top of the directory tree under which the server's
: : # configuration, error, and log files are kept.
: : #
: : # NOTE!  If you intend to place this on an NFS (or otherwise network)
: : # mounted filesystem then please read the LockFile documentation
: : # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
: : # you will save yourself a lot of trouble.
: : #
: : # Do NOT add a slash at the end of the directory path.
: : #
: : ServerRoot "/usr/local/apache/htdocs"
: :
: : #
: : # The LockFile directive sets the path to the lockfile used when Apache
: : # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
: : # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
: : # its default value. The main reason for changing it is if the logs
: : # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
: : # DISK. The PID of the main server process is automatically appended to
: : # the filename.
: : #
: : #LockFile /usr/local/apache/logs/httpd.lock
: :
: : #
: : # PidFile: The file in which the server should record its process
: : # identification number when it starts.
: : #
: : PidFile /usr/local/apache/logs/httpd.pid
: :
: : #
: : # ScoreBoardFile: File used to store internal server process information.
: : # Not all architectures require this.  But if yours does (you'll know because
: : # this file will be  created when you run Apache) then you *must* ensure that
: : # no two invocations of Apache share the same scoreboard file.
: : #
: : ScoreBoardFile /usr/local/apache/logs/httpd.scoreboard
: :
: : #
: : # In the standard configuration, the server will process httpd.conf (this
: : # file, specified by the -f command line option), srm.conf, and access.conf
: : # in that order.  The latter two files are now distributed empty, as it is
: : # recommended that all directives be kept in a single file for simplicity. 
: : # The commented-out values below are the built-in defaults.  You can have the
: : # server ignore these files altogether by using "/dev/null" (for Unix) or
: : # "nul" (for Win32) for the arguments to the directives.
: : #
: : #ResourceConfig conf/srm.conf
: : #AccessConfig conf/access.conf
: :
: : #
: : # Timeout: The number of seconds before receives and sends time out.
: : #
: : Timeout 300
: :
: : #
: : # KeepAlive: Whether or not to allow persistent connections (more than
: : # one request per connection). Set to "Off" to deactivate.
: : #
: : KeepAlive On
: :
: : #
: : # MaxKeepAliveRequests: The maximum number of requests to allow
: : # during a persistent connection. Set to 0 to allow an unlimited amount.
: : # We recommend you leave this number high, for maximum performance.
: : #
: : MaxKeepAliveRequests 100
: :
: : #
: : # KeepAliveTimeout: Number of seconds to wait for the next request from the
: : # same client on the same connection.
: : #
: : KeepAliveTimeout 15
: :
: : #
: : # Server-pool size regulation.  Rather than making you guess how many
: : # server processes you need, Apache dynamically adapts to the load it
: : # sees --- that is, it tries to maintain enough server processes to
: : # handle the current load, plus a few spare servers to handle transient
: : # load spikes (e.g., multiple simultaneous requests from a single
: : # Netscape browser).
: : #
: : # It does this by periodically checking how many servers are waiting
: : # for a request.  If there are fewer than MinSpareServers, it creates
: : # a new spare.  If there are more than MaxSpareServers, some of the
: : # spares die off.  The default values are probably OK for most sites.
: : #
: : MinSpareServers 5
: : MaxSpareServers 10
: :
: : #
: : # Number of servers to start initially --- should be a reasonable ballpark
: : # figure.
: : #
: : StartServers 5
: :
: : #
: : # Limit on total number of servers running, i.e., limit on the number
: : # of clients who can simultaneously connect --- if this limit is ever
: : # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
: : # It is intended mainly as a brake to keep a runaway server from taking
: : # the system with it as it spirals down...
: : #
: : MaxClients 150
: :
: : #
: : # MaxRequestsPerChild: the number of requests each child process is
: : # allowed to process before the child dies.  The child will exit so
: : # as to avoid problems after prolonged use when Apache (and maybe the
: : # libraries it uses) leak memory or other resources.  On most systems, this
: : # isn't really needed, but a few (such as Solaris) do have notable leaks
: : # in the libraries. For these platforms, set to something like 10000
: : # or so; a setting of 0 means unlimited.
: : #
: : # NOTE: This value does not include keepalive requests after the initial
: : #       request per connection. For example, if a child process handles
: : #       an initial request and 10 subsequent "keptalive" requests, it
: : #       would only count as 1 request towards this limit.
: : #
: : MaxRequestsPerChild 0
: :
: : #
: : # Listen: Allows you to bind Apache to specific IP addresses and/or
: : # ports, in addition to the default. See also the <VirtualHost>
: : # directive.
: : #
: : #Listen 3000
: : #Listen 12.34.56.78:80
: :
: : #
: : # BindAddress: You can support virtual hosts with this option. This directive
: : # is used to tell the server which IP address to listen to. It can either
: : # contain "*", an IP address, or a fully qualified Internet domain name.
: : # See also the <VirtualHost> and Listen directives.
: : #
: : #BindAddress *
: :
: : #
: : # Dynamic Shared Object (DSO) Support
: : #
: : # To be able to use the functionality of a module which was built as a DSO you
: : # have to place corresponding `LoadModule' lines at this location so the
: : # directives contained in it are actually available _before_ they are used.
: : # Please read the file README.DSO in the Apache 1.3 distribution for more
: : # details about the DSO mechanism and run `httpd -l' for the list of already
: : # built-in (statically linked and thus always available) modules in your httpd
: : # binary.
: : #
: : # Note: The order in which modules are loaded is important.  Don't change
: : # the order below without expert advice.
: : #
: : # Example:
: : # LoadModule foo_module libexec/mod_foo.so
: :
: : #
: : # ExtendedStatus controls whether Apache will generate "full" status
: : # information (ExtendedStatus On) or just basic information (ExtendedStatus
: : # Off) when the "server-status" handler is called. The default is Off.
: : #
: : #ExtendedStatus On
: :
: : ### Section 2: 'Main' server configuration
: : #
: : # The directives in this section set up the values used by the 'main'
: : # server, which responds to any requests that aren't handled by a
: : # <VirtualHost> definition.  These values also provide defaults for
: : # any <VirtualHost> containers you may define later in the file.
: : #
: : # All of these directives may appear inside <VirtualHost> containers,
: : # in which case these default settings will be overridden for the
: : # virtual host being defined.
: : #
: :
: : #
: : # If your ServerType directive (set earlier in the 'Global Environment'
: : # section) is set to "inetd", the next few directives don't have any
: : # effect since their settings are defined by the inetd configuration.
: : # Skip ahead to the ServerAdmin directive.
: : #
: :
: : #
: : # Port: The port to which the standalone server listens. For
: : # ports < 1023, you will need httpd to be run as root initially.
: : #
: : Port 80
: :
: : #
: : # If you wish httpd to run as a different user or group, you must run
: : # httpd as root initially and it will switch. 
: : #
: : # User/Group: The name (or #number) of the user/group to run httpd as.
: : #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
: : #  . On HPUX you may not be able to use shared memory as nobody, and the
: : #    suggested workaround is to create a user www and use that user.
: : #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
: : #  when the value of (unsigned)Group is above 60000;
: : #  don't use Group nobody on these systems!
: : #
: : User nobody
: : Group nobody
: :
: : #
: : # ServerAdmin: Your address, where problems with the server should be
: : # e-mailed.  This address appears on some server-generated pages, such
: : # as error documents.
: : #
: : ServerAdmin newhero at devgroup.kaist.ac.kr : :
: : #
: : # ServerName allows you to set a host name which is sent back to clients for
: : # your server if it's different than the one the program would get (i.e., use
: : # "www" instead of the host's real name).
: : #
: : # Note: You cannot just invent host names and hope they work. The name you
: : # define here must be a valid DNS name for your host. If you don't understand
: : # this, ask your network administrator.
: : # If your host doesn't have a registered DNS name, enter its IP address here.
: : # You will have to access it by its address (e.g., http://123.45.67.89/) : : # anyway, and this will make redirectio
: : ns work in a sensible way. #
: : # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
: : # machine always knows itself by this address. If you use Apache strictly for
: : # local testing and development, you may use 127.0.0.1 as the server name.
: : #
: : #ServerName devgroup.kaist.ac.kr
: :
: : #
: : # DocumentRoot: The directory out of which you will serve your
: : # documents. By default, all requests are taken from this directory, but
: : # symbolic links and aliases may be used to point to other locations.
: : #
: : DocumentRoot "/usr/local/apache/htdocs"
: :
: : #
: : # Each directory to which Apache has access, can be configured with respect
: : # to which services and features are allowed and/or disabled in that
: : # directory (and its subdirectories).
: : #
: : # First, we configure the "default" to be a very restrictive set of
: : # permissions. 
: : #
: : <Directory />
: :     Options FollowSymLinks
: :     AllowOverride None
: : </Directory>
: :
: : #
: : # Note that from this point forward you must specifically allow
: : # particular features to be enabled - so if something's not working as
: : # you might expect, make sure that you have specifically enabled it
: : # below.
: : #
: :
: : #
: : # This should be changed to whatever you set DocumentRoot to.
: : #
: : <Directory "/usr/local/apache/htdocs">
: :
: : #
: : # This may also be "None", "All", or any combination of "Indexes",
: : # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
: : #
: : # Note that "MultiViews" must be named *explicitly* --- "Options All"
: : # doesn't give it to you.
: : #
: :     Options Indexes FollowSymLinks MultiViews
: :
: : #
: : # This controls which options the .htaccess files in directories can
: : # override. Can also be "All", or any combination of "Options", "FileInfo",
: : # "AuthConfig", and "Limit"
: : #
: :     AllowOverride None
: :
: : #
: : # Controls who can get stuff from this server.
: : #
: :     Order allow,deny
: :     Allow from all
: : </Directory>
: :
: : #
: : # UserDir: The name of the directory which is appended onto a user's home
: : # directory if a ~user request is received.
: : #
: : <IfModule mod_userdir.c>
: :     UserDir public_html
: : </IfModule>
: :
: : #
: : # Control access to UserDir directories.  The following is an example
: : # for a site where these directories are restricted to read-only.
: : #
: : #<Directory /home/*/public_html>
: : #    AllowOverride FileInfo AuthConfig Limit
: : #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
: : #    <Limit GET POST OPTIONS PROPFIND>
: : #        Order allow,deny
: : #        Allow from all
: : #    </Limit>
: : #    <LimitExcept GET POST OPTIONS PROPFIND>
: : #        Order deny,allow
: : #        Deny from all
: : #    </LimitExcept>
: : #</Directory>
: :
: : #
: : # DirectoryIndex: Name of the file or files to use as a pre-written HTML
: : # directory index.  Separate multiple entries with spaces.
: : #
: : <IfModule mod_dir.c>
: :     DirectoryIndex index.html index.htm
: : </IfModule>
: :
: : #
: : # AccessFileName: The name of the file to look for in each directory
: : # for access control information.
: : #
: : AccessFileName .htaccess
: :
: : #
: : # The following lines prevent .htaccess files from being viewed by
: : # Web clients.  Since .htaccess files often contain authorization
: : # information, access is disallowed for security reasons.  Comment
: : # these lines out if you want Web visitors to see the contents of
: : # .htaccess files.  If you change the AccessFileName directive above,
: : # be sure to make the corresponding changes here.
: : #
: : # Also, folks tend to use names such as .htpasswd for password
: : # files, so this will protect those as well.
: : #
: : <Files ~ "^.ht">
: :     Order allow,deny
: :     Deny from all
: : </Files>
: :
: : #
: : # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
: : # document that was negotiated on the basis of content. This asks proxy
: : # servers not to cache the document. Uncommenting the following line disables
: : # this behavior, and proxies will be allowed to cache the documents.
: : #
: : #CacheNegotiatedDocs
: :
: : #
: : # UseCanonicalName: (new for 1.3)  With this setting turned on, whenever
: : # Apache needs to construct a self-referencing URL (a URL that refers back
: : # to the server the response is coming from) it will use ServerName and
: : # Port to form a "canonical" name.  With this setting off, Apache will
: : # use the hostname:port that the client supplied, when possible.  This
: : # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
: : #
: : UseCanonicalName On
: :
: : #
: : # TypesConfig describes where the mime.types file (or equivalent) is
: : # to be found.
: : #
: : <IfModule mod_mime.c>
: :     TypesConfig /usr/local/apache/conf/mime.types
: : </IfModule>
: :
: : #
: : # DefaultType is the default MIME type the server will use for a document
: : # if it cannot otherwise determine one, such as from filename extensions.
: : # If your server contains mostly text or HTML documents, "text/plain" is
: : # a good value.  If most of your content is binary, such as applications
: : # or images, you may want to use "application/octet-stream" instead to
: : # keep browsers from trying to display binary files as though they are
: : # text.
: : #
: : DefaultType text/plain
: :
: : #
: : # The mod_mime_magic module allows the server to use various hints from the
: : # contents of the file itself to determine its type.  The MIMEMagicFile
: : # directive tells the module where the hint definitions are located.
: : # mod_mime_magic is not part of the default server (you have to add
: : # it yourself with a LoadModule [see the DSO paragraph in the 'Global
: : # Environment' section], or recompile the server and include mod_mime_magic
: : # as part of the configuration), so it's enclosed in an <IfModule> container.
: : # This means that the MIMEMagicFile directive will only be processed if the
: : # module is part of the server.
: : #
: : <IfModule mod_mime_magic.c>
: :     MIMEMagicFile /usr/local/apache/conf/magic
: : </IfModule>
: :
: : #
: : # HostnameLookups: Log the names of clients or just their IP addresses
: : # e.g., www.apache.org (on) or 204.62.129.132 (off).
: : # The default is off because it'd be overall better for the net if people
: : # had to knowingly turn this feature on, since enabling it means that
: : # each client request will result in AT LEAST one lookup request to the
: : # nameserver.
: : #
: : HostnameLookups Off
: :
: : #
: : # ErrorLog: The location of the error log file.
: : # If you do not specify an ErrorLog directive within a <VirtualHost>
: : # container, error messages relating to that virtual host will be
: : # logged here.  If you *do* define an error logfile for a <VirtualHost>
: : # container, that host's errors will be logged there and not here.
: : #
: : ErrorLog /usr/local/apache/logs/error_log
: :
: : #
: : # LogLevel: Control the number of messages logged to the error_log.
: : # Possible values include: debug, info, notice, warn, error, crit,
: : # alert, emerg.
: : #
: : LogLevel warn
: :
: : #
: : # The following directives define some format nicknames for use with
: : # a CustomLog directive (see below).
: : #
: : LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
: : LogFormat "%h %l %u %t "%r" %>s %b" common
: : LogFormat "%{Referer}i -> %U" referer
: : LogFormat "%{User-agent}i" agent
: :
: : #
: : # The location and format of the access logfile (Common Logfile Format).
: : # If you do not define any access logfiles within a <VirtualHost>
: : # container, they will be logged here.  Contrariwise, if you *do*
: : # define per-<VirtualHost> access logfiles, transactions will be
: : # logged therein and *not* in this file.
: : #
: : CustomLog /usr/local/apache/logs/access_log common
: :
: : #
: : # If you would like to have agent and referer logfiles, uncomment the
: : # following directives.
: : #
: : #CustomLog /usr/local/apache/logs/referer_log referer
: : #CustomLog /usr/local/apache/logs/agent_log agent
: :
: : #
: : # If you prefer a single logfile with access, agent, and referer information
: : # (Combined Logfile Format) you can use the following directive.
: : #
: : #CustomLog /usr/local/apache/logs/access_log combined
: :
: : #
: : # Optionally add a line containing the server version and virtual host
: : # name to server-generated pages (error documents, FTP directory listings,
: : # mod_status and mod_info output etc., but not CGI generated documents).
: : # Set to "EMail" to also include a mailto: link to the ServerAdmin.
: : # Set to one of:  On | Off | EMail
: : #
: : ServerSignature On
: :
: : #
: : # Aliases: Add here as many aliases as you need (with no limit). The format is
: : # Alias fakename realname
: : #
: : <IfModule mod_alias.c>
: :
: :     #
: :     # Note that if you include a trailing / on fakename then the server will
: :     # require it to be present in the URL.  So "/icons" isn't aliased in this
: :     # example, only "/icons/"..
: :     #
: :     Alias /icons/ "/usr/local/apache/icons/"
: :
: :     <Directory "/usr/local/apache/icons">
: :         Options Indexes MultiViews
: :         AllowOverride None
: :         Order allow,deny
: :         Allow from all
: :     </Directory>
: :
: :     #
: :     # ScriptAlias: This controls which directories contain server scripts.
: :     # ScriptAliases are essentially the same as Aliases, except that
: :     # documents in the realname directory are treated as applications and
: :     # run by the server when requested rather than as documents sent to the client.
: :     # The same rules about trailing "/" apply to ScriptAlias directives as to
: :     # Alias.
: :     #
: :     ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
: :
: :     #
: :     # "/usr/local/apache/cgi-bin" should be changed to whatever your ScriptAliased
: :     # CGI directory exists, if you have that configured.
: :     #
: :     <Directory "/usr/local/apache/cgi-bin">
: :         AllowOverride None
: :         Options None
: :         Order allow,deny
: :         Allow from all
: :     </Directory>
: :
: : </IfModule>
: : # End of aliases.
: :
: : #
: : # Redirect allows you to tell clients about documents which used to exist in
: : # your server's namespace, but do not anymore. This allows you to tell the
: : # clients where to look for the relocated document.
: : # Format: Redirect old-URI new-URL
: : #
: :
: : #
: : # Directives controlling the display of server-generated directory listings.
: : #
: : <IfModule mod_autoindex.c>
: :
: :     #
: :     # FancyIndexing is whether you want fancy directory indexing or standard
: :     #
: :     IndexOptions FancyIndexing
: :
: :     #
: :     # AddIcon* directives tell the server which icon to show for different
: :     # files or filename extensions.  These are only displayed for
: :     # FancyIndexed directories.
: :     #
: :     AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
: :
: :     AddIconByType (TXT,/icons/text.gif) text/*
: :     AddIconByType (IMG,/icons/image2.gif) image/*
: :     AddIconByType (SND,/icons/sound2.gif) audio/*
: :     AddIconByType (VID,/icons/movie.gif) video/*
: :
: :     AddIcon /icons/binary.gif .bin .exe
: :     AddIcon /icons/binhex.gif .hqx
: :     AddIcon /icons/tar.gif .tar
: :     AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
: :     AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
: :     AddIcon /icons/a.gif .ps .ai .eps
: :     AddIcon /icons/layout.gif .html .shtml .htm .pdf
: :     AddIcon /icons/text.gif .txt
: :     AddIcon /icons/c.gif .c
: :     AddIcon /icons/p.gif .pl .py
: :     AddIcon /icons/f.gif .for
: :     AddIcon /icons/dvi.gif .dvi
: :     AddIcon /icons/uuencoded.gif .uu
: :     AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
: :     AddIcon /icons/tex.gif .tex
: :     AddIcon /icons/bomb.gif core
: :
: :     AddIcon /icons/back.gif ..
: :     AddIcon /icons/hand.right.gif README
: :     AddIcon /icons/folder.gif ^^DIRECTORY^^
: :     AddIcon /icons/blank.gif ^^BLANKICON^^
: :
: :     #
: :     # DefaultIcon is which icon to show for files which do not have an icon
: :     # explicitly set.
: :     #
: :     DefaultIcon /icons/unknown.gif
: :
: :     #
: :     # AddDescription allows you to place a short description after a file in
: :     # server-generated indexes.  These are only displayed for FancyIndexed
: :     # directories.
: :     # Format: AddDescription "description" filename
: :     #
: :     #AddDescription "GZIP compressed document" .gz
: :     #AddDescription "tar archive" .tar
: :     #AddDescription "GZIP compressed tar archive" .tgz
: :
: :     #
: :     # ReadmeName is the name of the README file the server will look for by
: :     # default, and append to directory listings.
: :     #
: :     # HeaderName is the name of a file which should be prepended to
: :     # directory indexes.
: :     #
: :     # If MultiViews are amongst the Options in effect, the server will
: :     # first look for name.html and include it if found.  If name.html
: :     # doesn't exist, the server will then look for name.txt and include
: :     # it as plaintext if found.
: :     #
: :     ReadmeName README
: :     HeaderName HEADER
: :
: :     #
: :     # IndexIgnore is a set of filenames which directory indexing should ignore
: :     # and not include in the listing.  Shell-style wildcarding is permitted.
: :     #
: :     IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
: :
: : </IfModule>
: : # End of indexing directives.
: :
: : #
: : # Document types.
: : #
: : <IfModule mod_mime.c>
: :
: :     #
: :     # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
: :     # information on the fly. Note: Not all browsers support this.
: :     # Despite the name similarity, the following Add* directives have nothing
: :     # to do with the FancyIndexing customization directives above.
: :     #
: :     AddEncoding x-compress Z
: :     AddEncoding x-gzip gz tgz
: :
: :     #
: :     # AddLanguage allows you to specify the language of a document. You can
: :     # then use content negotiation to give a browser a file in a language
: :     # it can understand. 
: :     #
: :     # Note 1: The suffix does not have to be the same as the language
: :     # keyword --- those with documents in Polish (whose net-standard
: :     # language code is pl) may wish to use "AddLanguage pl .po" to
: :     # avoid the ambiguity with the common suffix for perl scripts.
: :     #
: :     # Note 2: The example entries below illustrate that in quite
: :     # some cases the two character 'Language' abbriviation is not
: :     # identical to the two character 'Country' code for its country,
: :     # E.g. 'Danmark/dk' versus 'Danish/da'.
: :     #
: :     # Note 3: In the case of 'ltz' we violate the RFC by using a three char
: :     # specifier. But there is 'work in progress' to fix this and get
: :     # the reference data for rfc1766 cleaned up.
: :     #
: :     # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
: :     # French (fr) - German (de) - Greek-Modern (el)
: :     # Italian (it) - Korean (kr) - Norwegian (no)
: :     # Portugese (pt) - Luxembourgeois* (ltz)
: :     # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
: :     # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
: :     # Russian (ru)
: :     #
: :     AddLanguage da .dk
: :     AddLanguage nl .nl
: :     AddLanguage en .en
: :     AddLanguage et .ee
: :     AddLanguage fr .fr
: :     AddLanguage de .de
: :     AddLanguage el .el
: :     AddLanguage he .he
: :     AddCharset ISO-8859-8 .iso8859-8
: :     AddLanguage it .it
: :     AddLanguage ja .ja
: :     AddCharset ISO-2022-JP .jis
: :     AddLanguage kr .kr
: :     AddCharset ISO-2022-KR .iso-kr
: :     AddLanguage no .no
: :     AddLanguage pl .po
: :     AddCharset ISO-8859-2 .iso-pl
: :     AddLanguage pt .pt
: :     AddLanguage pt-br .pt-br
: :     AddLanguage ltz .lu
: :     AddLanguage ca .ca
: :     AddLanguage es .es
: :     AddLanguage sv .se
: :     AddLanguage cz .cz
: :     AddLanguage ru .ru
: :     AddLanguage tw .tw
: :     AddCharset Big5         .Big5    .big5
: :     AddCharset WINDOWS-1251 .cp-1251
: :     AddCharset CP866        .cp866
: :     AddCharset ISO-8859-5   .iso-ru
: :     AddCharset KOI8-R       .koi8-r
: :     AddCharset UCS-2        .ucs2
: :     AddCharset UCS-4        .ucs4
: :     AddCharset UTF-8        .utf8
: :
: :     # LanguagePriority allows you to give precedence to some languages
: :     # in case of a tie during content negotiation.
: :     #
: :     # Just list the languages in decreasing order of preference. We have
: :     # more or less alphabetized them here. You probably want to change this.
: :     #
: :     <IfModule mod_negotiation.c>
: :         LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es s
: : v tw
: :     </IfModule>
: :
: :     #
: :     # AddType allows you to tweak mime.types without actually editing it, or to
: :     # make certain files to be certain types.
: :     #
: :     # For example, the PHP 3.x module (not part of the Apache distribution - see
: :     # http://www.php.net) will typically use:
: :     #
: :     #AddType application/x-httpd-php3 .php3
: :     #AddType application/x-httpd-php3-source .phps
: :     #
: :     # And for PHP 4.x, use:
: :     #
: :     AddType application/x-httpd-php .php .php4 .html .inc
: :     AddType application/x-httpd-php-source .phps
: :
: :     AddType application/x-tar .tgz
: :
: :     #
: :     # AddHandler allows you to map certain file extensions to "handlers",
: :     # actions unrelated to filetype. These can be either built into the server
: :     # or added with the Action command (see below)
: :     #
: :     # If you want to use server side includes, or CGI outside
: :     # ScriptAliased directories, uncomment the following lines.
: :     #
: :     # To use CGI scripts:
: :     #
: :     #AddHandler cgi-script .cgi
: :
: :     #
: :     # To use server-parsed HTML files
: :     #
: :     #AddType text/html .shtml
: :     #AddHandler server-parsed .shtml
: :
: :     #
: :     # Uncomment the following line to enable Apache's send-asis HTTP file
: :     # feature
: :     #
: :     #AddHandler send-as-is asis
: :
: :     #
: :     # If you wish to use server-parsed imagemap files, use
: :     #
: :     #AddHandler imap-file map
: :
: :     #
: :     # To enable type maps, you might want to use
: :     #
: :     #AddHandler type-map var
: :
: : </IfModule>
: : # End of document types.
: :
: : #
: : # Action lets you define media types that will execute a script whenever
: : # a matching file is called. This eliminates the need for repeated URL
: : # pathnames for oft-used CGI file processors.
: : # Format: Action media/type /cgi-script/location
: : # Format: Action handler-name /cgi-script/location
: : #
: :
: : #
: : # MetaDir: specifies the name of the directory in which Apache can find
: : # meta information files. These files contain additional HTTP headers
: : # to include when sending the document
: : #
: : #MetaDir .web
: :
: : #
: : # MetaSuffix: specifies the file name suffix for the file containing the
: : # meta information.
: : #
: : #MetaSuffix .meta
: :
: : #
: : # Customizable error response (Apache style)
: : #  these come in three flavors
: : #
: : #    1) plain text
: : #ErrorDocument 500 "The server made a boo boo.
: : #  n.b.  the single leading (") marks it as text, it does not get output
: : #
: : #    2) local redirects
: : #ErrorDocument 404 /missing.html
: : #  to redirect to local URL /missing.html
: : #ErrorDocument 404 /cgi-bin/missing_handler.pl
: : #  N.B.: You can redirect to a script or a document using server-side-includes.
: : #
: : #    3) external redirects
: : #ErrorDocument 402 http://some.other_server.com/subscription_info.html : : #  N.B.: Many of the environment variabl
: : es associated with the original #  request will *not* be available to such a script.
: :
: : #
: : # Customize behaviour based on the browser
: : #
: : <IfModule mod_setenvif.c>
: :
: :     #
: :     # The following directives modify normal HTTP response behavior.
: :     # The first directive disables keepalive for Netscape 2.x and browsers that
: :     # spoof it. There are known problems with these browser implementations.
: :     # The second directive is for Microsoft Internet Explorer 4.0b2
: :     # which has a broken HTTP/1.1 implementation and does not properly
: :     # support keepalive when it is used on 301 or 302 (redirect) responses.
: :     #
: :     BrowserMatch "Mozilla/2" nokeepalive
: :     BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
: :
: :     #
: :     # The following directive disables HTTP/1.1 responses to browsers which
: :     # are in violation of the HTTP/1.0 spec by not being able to grok a
: :     # basic 1.1 response.
: :     #
: :     BrowserMatch "RealPlayer 4.0" force-response-1.0
: :     BrowserMatch "Java/1.0" force-response-1.0
: :     BrowserMatch "JDK/1.0" force-response-1.0
: :
: : </IfModule>
: : # End of browser customization directives
: :
: : #
: : # Allow server status reports, with the URL of http://servername/server-status
: : # Change the ".your_domain.com" to match your domain to enable.
: : #
: : #<Location /server-status>
: : #    SetHandler server-status
: : #    Order deny,allow
: : #    Deny from all
: : #    Allow from .your_domain.com
: : #</Location>
: :
: : #
: : # Allow remote server configuration reports, with the URL of
: : # http://servername/server-info (requires that mod_info.c be loaded).
: : # Change the ".your_domain.com" to match your domain to enable.
: : #
: : #<Location /server-info>
: : #    SetHandler server-info
: : #    Order deny,allow
: : #    Deny from all
: : #    Allow from .your_domain.com
: : #</Location>
: :
: : #
: : # There have been reports of people trying to abuse an old bug from pre-1.1
: : # days.  This bug involved a CGI script distributed as a part of Apache.
: : # By uncommenting these lines you can redirect these attacks to a logging
: : # script on phf.apache.org.  Or, you can record them yourself, using the script
: : # support/phf_abuse_log.cgi.
: : #
: : #<Location /cgi-bin/phf*>
: : #    Deny from all
: : #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi : : #</Location>
: :
: : #
: : # Proxy Server directives. Uncomment the following lines to
: : # enable the proxy server:
: : #
: : #<IfModule mod_proxy.c>
: : #    ProxyRequests On
: :
: : #    <Directory proxy:*>
: : #        Order deny,allow
: : #        Deny from all
: : #        Allow from .your_domain.com
: : #    </Directory>
: :
: :     #
: :     # Enable/disable the handling of HTTP/1.1 "Via:" headers.
: :     # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
: :     # Set to one of: Off | On | Full | Block
: :     #
: : #    ProxyVia On
: :
: :     #
: :     # To enable the cache as well, edit and uncomment the following lines:
: :     # (no cacheing without CacheRoot)
: :     #
: : #    CacheRoot "/usr/local/apache/proxy"
: : #    CacheSize 5
: : #    CacheGcInterval 4
: : #    CacheMaxExpire 24
: : #    CacheLastModifiedFactor 0.1
: : #    CacheDefaultExpire 1
: : #    NoCache a_domain.com another_domain.edu joes.garage_sale.com
: :
: : #</IfModule>
: : # End of proxy directives.
: :
: : ### Section 3: Virtual Hosts
: : #
: : # VirtualHost: If you want to maintain multiple domains/hostnames on your
: : # machine you can setup VirtualHost containers for them. Most configurations
: : # use only name-based virtual hosts so the server doesn't need to worry about
: : # IP addresses. This is indicated by the asterisks in the directives below.
: : #
: : # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
: : # for further details before you try to setup virtual hosts.
: : #
: : # You may use the command line option '-S' to verify your virtual host
: : # configuration.
: :
: : #
: : # Use name-based virtual hosting.
: : #
: : #NameVirtualHost *
: :
: : #
: : # VirtualHost example:
: : # Almost any Apache directive may go into a VirtualHost container.
: : # The first VirtualHost section is used for requests without a known
: : # server name.
: : #
: : #<VirtualHost *>
: : #    ServerAdmin webmaster at dummy-host.example.com : : #    DocumentRoot /www/docs/dummy-host.example.com
: : #    ServerName dummy-host.example.com
: : #    ErrorLog logs/dummy-host.example.com-error_log
: : #    CustomLog logs/dummy-host.example.com-access_log common
: : #</VirtualHost>
: :
: : --
: : what a beautiful day..
:
:
: >음 잘만 컴파일 하셨다면 문제는 꽤 간단한거 같군요.
: 님이 설치하신 apache디렉토리로 가면 거기에 bin 디렉토리로 가세요
: 그디렉토리 안에 apachectl이란 파일 이 있을겁니다.
: 그럼 ....../apache/bin/apachectl start
: 라는 명령어만 치면 apache가 뜰겁니다. 그럼 안녕
 그 방법도 안되는군요..
 ./apachectl start: httpd started
 라고 나오지만 ps 해보면 안떠있어요..
 T.T--what a beautiful day..