흐흐
님도 저랑 똑같은 상황에 처하셨군요.
고거  저는 간단하게 해결했습니다.
재설치......^^!
   : 안녕하세요. 사랑넷을 알게 된지 얼마 안된 초보 리눅서 입니다.
: 매번 이렇게 도움을 요청해서 죄송합니다.
: 다름이 아니라 어제까지 리눅스에서 Xwindows를 잘 썼는데, 오늘 다시 리눅
: 스로 부팅을 해보니 안뜹니다.
: 뭐가 잘못 된지 모르겠습니다.
: 에러 메세지는 아래와 같습니다.
: 꼭좀 부탁 드립니다.
: 그럼 좋은 하루되세요.
:
:
: XFree86 Version 3.3.3.1 / X Window System
: (protocol Version 11, revision 0, vendor release 6300)
: Release Date: January 4 1999
:  If the server is older than 6-12 months, or if your card is newer
:  than the above date, look for a newer version before reporting
:  problems.  (see http://www.XFree86.Org/FAQ) : Operating System: Linux 2.2.5-15 i686 [ELF]
: Configured drivers:
:   S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
:       newmmio, mmio_928, s3_generic
: (using VT number 7)
: 
: XF86Config:/usr/X11R6/lib/X11/XF86Config
: (**) stands for supplied, (--) stands for probed/default values
: (**) XKB: keycodes: "xfree86"
: (**) XKB: types: "default"
: (**) XKB: compat: "default"
: (**) XKB: symbols: "us(pc101)"
: (**) XKB: geometry: "pc"
: (**) XKB: rules: "xfree86"
: (**) XKB: model: "pc101"
: (**) XKB: layout: "us"
: (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
: (**) Mouse: buttons: 5, 3 button emulation (timeout: 50ms)
: (**) Mouse: zaxismapping: (-)4 (+)5
: (**) S3: Graphics device ID:"My Video Card"
: (**) S3: Monitor ID:"Samsung SyncMaster 15GLe"
: (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
: (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
: (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
: (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
: (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
: (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
: (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
: (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
: (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
: (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
: (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
: (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
: (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
: (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
: (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
: (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
: (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
: (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
: (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
: (**) FontPath set to "unix/:-1"
: (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000
: (--) S3: chipset:   Trio64V+ rev. 54
: (--) S3: chipset driver: newmmio
: (--) S3: card type: PCI
: 
: (--) S3: videoram:  2048k
: (--) S3: Ramdac type: s3_trio64
: (--) S3: Ramdac speed: 135 MHz
: (--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
: (--) S3: Maximum allowed dot-clock: 95.000 MHz
: (**) S3: Mode "1024x768": mode clock =  65.000
: (**) S3: Using 16 bpp.  Color weight: 565
: (--) S3: Virtual resolution set to 1024x768
: (--) S3: Local bus LAW is 0xE0000000
: (--) S3: Using a banksize of 2048k, line width of 1024
: (--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
: (--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache
: _FontTransSocketUNIXConnect: Can't connect: errno = 111
: failed to set default font path 'unix/:-1'
: Fatal server error:
: could not open default font 'fixed'
: 
: When reporting a problem related to a server crash, please send
: the full server output, not just the last messages
: 
: X connection to :0.0 broken (explicit kill or server shutdown).--^^$