제가 1원짜리 팁에서 디지털카메라루 usb를 잡는법을 보구
따라 하는데여...
잘 안되네여....
아래를 봐주세여....
 [root@localhost dev]# lsmod
Module Size Used by Tainted: P
nls_iso8859-1 2816 1 (autoclean)
sd_mod 11260 0 (autoclean)
nls_cp949 141440 2 (autoclean)
nls_cp437 4320 2 (autoclean)
vfat 10140 2 (autoclean)
fat 32504 0 (autoclean) [vfat]
ppp_synctty 5216 0 (unused)
ppp_async 6624 1
ppp_generic 19176 3 [ppp_synctty ppp_async]
slhc 5152 0 [ppp_generic]
cs46xx 55240 2 (autoclean)
ac97_codec 9504 0 (autoclean) [cs46xx]
soundcore 4324 3 (autoclean) [cs46xx]
8139too 17440 1
ide-scsi 8192 1
ide-cd 27360 0
sr_mod 15320 1 (autoclean)
cdrom 28480 0 (autoclean) [ide-cd sr_mod]
usb-storage 54732 0
scsi_mod 95848 4 [sd_mod ide-scsi sr_mod usb-storage]
usb-uhci 21764 0 (unused)
usbcore 51744 1 [usb-storage usb-uhci]
ext3 61568 1
jbd 40420 1 [ext3]
  이렇게 나옵니다..
그리곤
   [root@localhost scsi]# cat scsi
Attached devices:
Host: scsi0 Channel:00 Id:00 Lun:00
Vendor: General Model: Flash Disk Drive Rev:2.05
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel:00 Id:00 Lun:00
Vendor: SAMSUNG Model: CD-R/RW SW-224B Rev: R204
Type: CD-ROM ANSI SCSI revision: 02
 이렇게 나오네여...
그럼 mount할때 어떻게 잡아 줘야 되는지요...
mount /dev/** /mnt/usb루 해줘야 되는데.
위에 **에 뭐가 들어가야 되는지를 모르겠네여.
ㅜ.ㅜ
 [root@localhost mnt]# mount /dev/sda1 /mnt/usb
mount: /dev/sda1 is not a valid block device
[root@localhost mnt]# mount /dev/sda /mnt/usb
/dev/sda: 입력/출력 오류
mount: you must specify the filesystem type
[root@localhost mnt]# mount /dev/sda0 /mnt/usb
mount: special device /dev/sda0 does not exist
 위에 같이 나오네여...
어떻게 설정해야 되는지 알려주세여.
그럼 답변 기다리겠습니다....