제가 보기에는 틀릴수도있어여
0번 랜카드의 맥어드레스가 ff:ff:ff:ff:ff:...로 되어있네여..
일단 0번이 인식이 잘 안되고있는것같습니다.(인식은합니다)
만약 리눗스를 설치한 상태에서 랜카드를 추가하셨다면
커널을 다시만들어 주시고여....
그게아니라면 스롯을 한번 바꺼보시는게....
허접한 대답이었습니다...
정확한건 0번 랜카드의 이상입니다. 맥어드레스 ff:ff:ff:...
이게문제군여... 2번은 이상없습니다..
 : 안녕하세요.
: 이번에 DHCP 서버를 돌리려고 랜카드를 한장 더 장착을 하고 DHCP서버를
: 설치하려고 하는 랜카드는 잡히는데 네트워크가 먹통이 되네요.
: 우선 랜카드는 리얼텍8139B 2장입니다. 한장은 내부용 다른 한장은 외부용
: 다음은 제 컴퓨터의 부팅 화면 입니다.
:
: Linux version 2.4.2-2 (root at porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr
:  8 20:41:30 EDT 2001 BIOS-provided physical RAM map:
:  BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
:  BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable)
:  BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
:  BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
:  BIOS-e820: 0000000003f00000 @ 0000000000100000 (usable)
: On node 0 totalpages: 16384
: zone(0): 4096 pages.
: zone DMA has max 32 cached pages.
: zone(1): 12288 pages.
: zone Normal has max 96 cached pages.
: zone(2): 0 pages.
: zone HighMem has max 1 cached pages.
: Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.2-2
: Initializing CPU#0
: Detected 350.813 MHz processor.
: Console: colour VGA+ 80x25
: Calibrating delay loop... 699.59 BogoMIPS
: Memory: 62032k/65536k available (1365k kernel code, 3116k reserved, 92k data, 236k init, 0k highmem)
: Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
: Page-cache hash table entries: 16384 (order: 5, 131072 bytes)
: Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
: VFS: Diskquotas version dquot_6.5.0 initialized
: CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
: CPU: L1 I cache: 16K, L1 D cache: 16K
: CPU: L2 cache: 512K
: Intel machine check architecture supported.
: Intel machine check reporting enabled on CPU#0.
: CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
: CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
: CPU: Common caps: 0183f9ff 00000000 00000000 00000000
: CPU: Intel Pentium II (Deschutes) stepping 02
: Enabling fast FPU save and restore... done.
: Checking 'hlt' instruction... OK.
: POSIX conformance testing by UNIFIX
: mtrr: v1.37 (20001109) Richard Gooch (rgooch at atnf.csiro.au)
: mtrr: detected mtrr type: Intel
: PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
: PCI: Using configuration type 1
: PCI: Probing PCI hardware
: PCI: Disabled enhanced CPU to PCI posting #2
: PCI: Using IRQ router VIA [1106/0596] at 00:07.0
: PCI: Cannot allocate resource region 4 of device 00:07.1
: PCI: Cannot allocate resource region 0 of device 00:0a.0
:   got res[1000:100f] for resource 4 of VIA Technologies, Inc. Bus Master IDE
:   got res[1400:14ff] for resource 0 of Realtek Semiconductor Co., Ltd. RTL-8139 (#2)
: Activating ISA DMA hang workarounds.
: isapnp: Scanning for PnP cards...
: isapnp: No Plug & Play device found
: Linux NET4.0 for Linux 2.4
: Based upon Swansea University Computer Society NET3.039
: Initializing RT netlink socket
: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
: Starting kswapd v1.8
: Detected PS/2 Mouse Port.
: pty: 256 Unix98 ptys configured
: block: queued sectors max/low 41098kB/13699kB, 128 slots per queue
: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
: Uniform Multi-Platform E-IDE driver Revision: 6.31
: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
: VP_IDE: IDE controller on PCI bus 00 dev 39
: VP_IDE: chipset revision 6
: VP_IDE: not 100% native mode: will probe irqs later
: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
: VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci00:07.1
:     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
:     ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
: hda: ST313032A, ATA DISK drive
: hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive
: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
: ide1 at 0x170-0x177,0x376 on irq 15
: hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=1583/255/63, UDMA(33)
: Partition check:
:  hda: hda1 hda2 < hda5 hda6 >
: Floppy drive(s): fd0 is 1.44M
: FDC 0 is a post-1991 82077
: Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
: Real Time Clock Driver v1.10d
: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
: md.c: sizeof(mdp_super_t) = 4096
: autodetecting RAID arrays
: autorun ...
: ... autorun DONE.
: NET4: Linux TCP/IP 1.0 for NET4.0
: IP Protocols: ICMP, UDP, TCP, IGMP
: IP: routing cache hash table of 512 buckets, 4Kbytes
: TCP: Hash tables configured (established 4096 bind 4096)
: Linux IP multicast router 0.06 plus PIM-SM
: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
: VFS: Mounted root (ext2 filesystem) readonly.
: Freeing unused kernel memory: 236k freed
: Adding Swap:200772k swap-space (priority -1)
: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
: Winbond chip at EFER=0x3f0 key=0x87 devid=fc devrev=00 oldid=0b
: Winbond chip type 83877AF
: SMSC Super-IO detection, now testing Ports 2F0, 370 ...
: parport0: PC-style at 0x378 [PCSPP]
: parport0: cpp_daisy: aa5500ff(38)
: parport0: assign_addrs: aa5500ff(38)
: parport0: cpp_daisy: aa5500ff(38)
: parport0: assign_addrs: aa5500ff(38)
: ip_conntrack (512 buckets, 4096 max)
: 8139too Fast Ethernet driver 0.9.15 loaded
: PCI: Found IRQ 11 for device 00:08.0
: PCI: Setting latency timer of device 00:08.0 to 64
: 8139too: PCI device 00:08.0: unknown chip version, assuming RTL-8139
: 8139too: PCI device 00:08.0: TxConfig = 0xffffffff
: eth0: RealTek RTL8139 Fast Ethernet at 0xc482d000, ff:ff:ff:ff:ff:ff, IRQ 11
: eth0:  Identified 8139 chip type 'RTL-8139'
: PCI: Found IRQ 10 for device 00:0a.0
: eth1: RealTek RTL8139 Fast Ethernet at 0xc482f000, 00:40:95:30:7c:86, IRQ 10
: eth1:  Identified 8139 chip type 'RTL-8139B'
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
: NETDEV WATCHDOG: eth0: transmit timed out
: eth0: Tx queue start entry 4  dirty entry 0.
: eth0:  Tx descriptor 0 is ffffffff. (queue head)
: eth0:  Tx descriptor 1 is ffffffff.
: eth0:  Tx descriptor 2 is ffffffff.
: eth0:  Tx descriptor 3 is ffffffff.
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: NETDEV WATCHDOG: eth0: transmit timed out
: eth0: Tx queue start entry 4  dirty entry 0.
: eth0:  Tx descriptor 0 is ffffffff. (queue head)
: eth0:  Tx descriptor 1 is ffffffff.
: eth0:  Tx descriptor 2 is ffffffff.
: eth0:  Tx descriptor 3 is ffffffff.
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: NETDEV WATCHDOG: eth0: transmit timed out
: eth0: Tx queue start entry 4  dirty entry 0.
: eth0:  Tx descriptor 0 is ffffffff. (queue head)
: eth0:  Tx descriptor 1 is ffffffff.
: eth0:  Tx descriptor 2 is ffffffff.
: eth0:  Tx descriptor 3 is ffffffff.
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: NETDEV WATCHDOG: eth0: transmit timed out
: eth0: Tx queue start entry 4  dirty entry 0.
: eth0:  Tx descriptor 0 is ffffffff. (queue head)
: eth0:  Tx descriptor 1 is ffffffff.
: eth0:  Tx descriptor 2 is ffffffff.
: eth0:  Tx descriptor 3 is ffffffff.
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
: eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
:
: 로그 화면이 왜 이렇게 되죠??