잘 되던 startx 실행이 안 되네요.. 아무래도 도스에서 fdisk
 를 잘 못 건드린게 원인이지 싶은데요... 그런 상황이라면 리눅스를
 다시 깔아야 하는 건가요?? 다시 깔아도 상관은 없는데요...
 원인이 너무 궁금해서요.. startx 로그 화일입니다.. 맨 밑에 부분만
 봐도 될 듯...
 잘 나가다가,,, font 가 없다고 에러가 나더군요.. 그래서 XFreeConfig
 파일에서 font path 를 font가 있는 곳에 해주고,,, xfs 를 재시작 했는
 데도 잘 되지 않습니다..
  질문 1 : 원인이 뭘까요??
  질문 2 : 리눅스 다시 깔아야 하나요?
  질문 3 : 'unix/:-1' 의 의미는 뭐지요?
  ------------------------------------------------------
 XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.14-5.0azsmp i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
      RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
      GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
      sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630,
      sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
      generic
(using VT number 7)
 XF86Config:/usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID:"My Video Card"
(**) SVGA: Monitor ID:"Samsung SyncMaster 700p/700Mp"
(--) SVGA: Invalid vertical timing for mode "352x280". Deleted.
(--) SVGA: Invalid vertical timing for mode "352x288". Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not exist.
         Entry deleted from font path.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: NVidia Riva Vanta TNT2 rev 21, Memory @ 0xd4000000, 0xd6000000
(--) SVGA: chipset:  RIVA TNT2
(--) SVGA: videoram: 16256k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 350.000 MHz
(**) SVGA: Mode "1600x1200": mode clock = 162.000
(**) SVGA: Mode "320x240": mode clock =  15.750
(**) SVGA: Mode "352x240": mode clock =  15.750
(--) SVGA: There is no mode definition named "352x280"
(--) SVGA: Removing mode "352x280" from list of valid modes.
(--) SVGA: There is no mode definition named "352x288"
(--) SVGA: Removing mode "352x288" from list of valid modes.
(--) SVGA: Virtual resolution set to 1600x1200
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: RIVA TNT2: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Using 12 128x64 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'
 When reporting a problem related to a server crash, please send
the full server output, not just the last messages
 X connection to :0.0 broken (explicit kill or server shutdown).
 --------------------------------------------------